Need used rear bumper for Jeep cherokee in Chicago?? - Page 2 - Jeeps Canada

Dec 16, 2006 | 12:06 PM

Share

#11

Harry Palmer

Guest

Posts: n/a

Re: Need used rear bumper for Jeep cherokee in Chicago??

"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:c64db$45840f03$422afc51$8238@FUSE.NET...
> What size mollys?
>
> "Harry Palmer" <nope@nope.com> wrote in message
> news:kARgh.813$Gw4.468@newssvr23.news.prodigy.net. ..
> >
> > "DougW" <post.replies@invalid.address> wrote in message
> > news:tHDgh.17700$Rj.11941@newsfe19.lga...
> >> Harry Palmer wrote:
> >> > Anyone know a good used auto parts place for me to get a black rear
> >> > bumper for a 2002 Grand Cherokee. Also how difficult is it to put
> >> > on/remove do I need any special tools?
> >>
> >> Locations, dunno. I usually go OEM from buymopar.com or
> >> chryslerpartsdirect.com
> >>
> >> The usual shipping is grey plastic that has to be primed/painted.
> >> Some repair places can fix cuts. Dents can be pushed out and
> >> whitemarks can be erased by careful use of a heat gun.
> >>
> >> Behind that bumper is a foam block and steel nerfs that crush on impact
> >> so check to make sure you have all you need.
> >>
> >> There are two plastic rails. One on each side. Those are a hard
plastic
> >> and can crack.
> >>
> >> As for tools it's mostly held on by plastic pops. Getting those out
> >> usually requires a screwdriver or needle nose pliers. New pops are
> >> expensive but if your careful most can be reused. The local hardware
> >> store will have mollybolts or similar that will work as replacements.
> >>
> >> --
> >> DougW
> >>
> >>
> >
> > Thanks Doug
> > this was a great help. It was great of you to include helpful tips, I
had
> > never heard of mollybolts before.
> > Hp
> >
> >
>
>
don't know yet haven't looked. I'm going to try to get the pops out
smoothly.

Reply

Dec 16, 2006 | 12:06 PM

Share

#12

Harry Palmer

Guest

Posts: n/a

Re: Need used rear bumper for Jeep cherokee in Chicago??

"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:c64db$45840f03$422afc51$8238@FUSE.NET...
> What size mollys?
>
> "Harry Palmer" <nope@nope.com> wrote in message
> news:kARgh.813$Gw4.468@newssvr23.news.prodigy.net. ..
> >
> > "DougW" <post.replies@invalid.address> wrote in message
> > news:tHDgh.17700$Rj.11941@newsfe19.lga...
> >> Harry Palmer wrote:
> >> > Anyone know a good used auto parts place for me to get a black rear
> >> > bumper for a 2002 Grand Cherokee. Also how difficult is it to put
> >> > on/remove do I need any special tools?
> >>
> >> Locations, dunno. I usually go OEM from buymopar.com or
> >> chryslerpartsdirect.com
> >>
> >> The usual shipping is grey plastic that has to be primed/painted.
> >> Some repair places can fix cuts. Dents can be pushed out and
> >> whitemarks can be erased by careful use of a heat gun.
> >>
> >> Behind that bumper is a foam block and steel nerfs that crush on impact
> >> so check to make sure you have all you need.
> >>
> >> There are two plastic rails. One on each side. Those are a hard
plastic
> >> and can crack.
> >>
> >> As for tools it's mostly held on by plastic pops. Getting those out
> >> usually requires a screwdriver or needle nose pliers. New pops are
> >> expensive but if your careful most can be reused. The local hardware
> >> store will have mollybolts or similar that will work as replacements.
> >>
> >> --
> >> DougW
> >>
> >>
> >
> > Thanks Doug
> > this was a great help. It was great of you to include helpful tips, I
had
> > never heard of mollybolts before.
> > Hp
> >
> >
>
>
don't know yet haven't looked. I'm going to try to get the pops out
smoothly.

Reply

Dec 16, 2006 | 12:06 PM

Share

#13

Harry Palmer

Guest

Posts: n/a

Re: Need used rear bumper for Jeep cherokee in Chicago??

"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:c64db$45840f03$422afc51$8238@FUSE.NET...
> What size mollys?
>
> "Harry Palmer" <nope@nope.com> wrote in message
> news:kARgh.813$Gw4.468@newssvr23.news.prodigy.net. ..
> >
> > "DougW" <post.replies@invalid.address> wrote in message
> > news:tHDgh.17700$Rj.11941@newsfe19.lga...
> >> Harry Palmer wrote:
> >> > Anyone know a good used auto parts place for me to get a black rear
> >> > bumper for a 2002 Grand Cherokee. Also how difficult is it to put
> >> > on/remove do I need any special tools?
> >>
> >> Locations, dunno. I usually go OEM from buymopar.com or
> >> chryslerpartsdirect.com
> >>
> >> The usual shipping is grey plastic that has to be primed/painted.
> >> Some repair places can fix cuts. Dents can be pushed out and
> >> whitemarks can be erased by careful use of a heat gun.
> >>
> >> Behind that bumper is a foam block and steel nerfs that crush on impact
> >> so check to make sure you have all you need.
> >>
> >> There are two plastic rails. One on each side. Those are a hard
plastic
> >> and can crack.
> >>
> >> As for tools it's mostly held on by plastic pops. Getting those out
> >> usually requires a screwdriver or needle nose pliers. New pops are
> >> expensive but if your careful most can be reused. The local hardware
> >> store will have mollybolts or similar that will work as replacements.
> >>
> >> --
> >> DougW
> >>
> >>
> >
> > Thanks Doug
> > this was a great help. It was great of you to include helpful tips, I
had
> > never heard of mollybolts before.
> > Hp
> >
> >
>
>
don't know yet haven't looked. I'm going to try to get the pops out
smoothly.

Reply