need help about throttle body install.
#31
Guest
Posts: n/a
Re: need help about throttle body install.
I can attest to that. I bought a bored out 4.0 TB and put it on my 2.5L.
Left it there for less than a day. WAY too many dead spots. Didn't want to
kill my engine. Traded it with a buddy who had a 4.0, took his stock TB and
some $$ and we were both happy.
Eric
"DougW" <post.replies@invalid.address> wrote in message
news:J3Quc.7237$W01.3085@okepread01...
> Dave Milne did pass the time by typing:
> > that's a bored out body, not a spacer as he has. I have no idea if the
bored
> > out body works (but I'm sceptical as if used with the stock air box as
there
> > is a restriction that is narrower than the normal body)
>
> They do, with limitations. Anything that helps the engine breath
> easier aids in power but what goes in must go out and the injectors
> have to be able to keep up.
>
> I wouldn't use anything larger than a 4.0 TB on the 4banger
> or your going to get one massive deadspot at the top. Stock
> fuel injectors can't keep up and it leans out.
>
> The one on my 6 is bored over, but then again it's pulling
> a lot of air though. :)
>
> > "Jersey" wrote ...
> >> What about this???
> >>
> >> http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
>
> Better to give it a try with a junkyard TB just in case
> something goes wrong. And you can go back to stock
> if it causes problems with emissions tests.
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>
Left it there for less than a day. WAY too many dead spots. Didn't want to
kill my engine. Traded it with a buddy who had a 4.0, took his stock TB and
some $$ and we were both happy.
Eric
"DougW" <post.replies@invalid.address> wrote in message
news:J3Quc.7237$W01.3085@okepread01...
> Dave Milne did pass the time by typing:
> > that's a bored out body, not a spacer as he has. I have no idea if the
bored
> > out body works (but I'm sceptical as if used with the stock air box as
there
> > is a restriction that is narrower than the normal body)
>
> They do, with limitations. Anything that helps the engine breath
> easier aids in power but what goes in must go out and the injectors
> have to be able to keep up.
>
> I wouldn't use anything larger than a 4.0 TB on the 4banger
> or your going to get one massive deadspot at the top. Stock
> fuel injectors can't keep up and it leans out.
>
> The one on my 6 is bored over, but then again it's pulling
> a lot of air though. :)
>
> > "Jersey" wrote ...
> >> What about this???
> >>
> >> http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
>
> Better to give it a try with a junkyard TB just in case
> something goes wrong. And you can go back to stock
> if it causes problems with emissions tests.
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>
#32
Guest
Posts: n/a
Re: need help about throttle body install.
I can attest to that. I bought a bored out 4.0 TB and put it on my 2.5L.
Left it there for less than a day. WAY too many dead spots. Didn't want to
kill my engine. Traded it with a buddy who had a 4.0, took his stock TB and
some $$ and we were both happy.
Eric
"DougW" <post.replies@invalid.address> wrote in message
news:J3Quc.7237$W01.3085@okepread01...
> Dave Milne did pass the time by typing:
> > that's a bored out body, not a spacer as he has. I have no idea if the
bored
> > out body works (but I'm sceptical as if used with the stock air box as
there
> > is a restriction that is narrower than the normal body)
>
> They do, with limitations. Anything that helps the engine breath
> easier aids in power but what goes in must go out and the injectors
> have to be able to keep up.
>
> I wouldn't use anything larger than a 4.0 TB on the 4banger
> or your going to get one massive deadspot at the top. Stock
> fuel injectors can't keep up and it leans out.
>
> The one on my 6 is bored over, but then again it's pulling
> a lot of air though. :)
>
> > "Jersey" wrote ...
> >> What about this???
> >>
> >> http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
>
> Better to give it a try with a junkyard TB just in case
> something goes wrong. And you can go back to stock
> if it causes problems with emissions tests.
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>
Left it there for less than a day. WAY too many dead spots. Didn't want to
kill my engine. Traded it with a buddy who had a 4.0, took his stock TB and
some $$ and we were both happy.
Eric
"DougW" <post.replies@invalid.address> wrote in message
news:J3Quc.7237$W01.3085@okepread01...
> Dave Milne did pass the time by typing:
> > that's a bored out body, not a spacer as he has. I have no idea if the
bored
> > out body works (but I'm sceptical as if used with the stock air box as
there
> > is a restriction that is narrower than the normal body)
>
> They do, with limitations. Anything that helps the engine breath
> easier aids in power but what goes in must go out and the injectors
> have to be able to keep up.
>
> I wouldn't use anything larger than a 4.0 TB on the 4banger
> or your going to get one massive deadspot at the top. Stock
> fuel injectors can't keep up and it leans out.
>
> The one on my 6 is bored over, but then again it's pulling
> a lot of air though. :)
>
> > "Jersey" wrote ...
> >> What about this???
> >>
> >> http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
>
> Better to give it a try with a junkyard TB just in case
> something goes wrong. And you can go back to stock
> if it causes problems with emissions tests.
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>
#33
Guest
Posts: n/a
Re: need help about throttle body install.
I can attest to that. I bought a bored out 4.0 TB and put it on my 2.5L.
Left it there for less than a day. WAY too many dead spots. Didn't want to
kill my engine. Traded it with a buddy who had a 4.0, took his stock TB and
some $$ and we were both happy.
Eric
"DougW" <post.replies@invalid.address> wrote in message
news:J3Quc.7237$W01.3085@okepread01...
> Dave Milne did pass the time by typing:
> > that's a bored out body, not a spacer as he has. I have no idea if the
bored
> > out body works (but I'm sceptical as if used with the stock air box as
there
> > is a restriction that is narrower than the normal body)
>
> They do, with limitations. Anything that helps the engine breath
> easier aids in power but what goes in must go out and the injectors
> have to be able to keep up.
>
> I wouldn't use anything larger than a 4.0 TB on the 4banger
> or your going to get one massive deadspot at the top. Stock
> fuel injectors can't keep up and it leans out.
>
> The one on my 6 is bored over, but then again it's pulling
> a lot of air though. :)
>
> > "Jersey" wrote ...
> >> What about this???
> >>
> >> http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
>
> Better to give it a try with a junkyard TB just in case
> something goes wrong. And you can go back to stock
> if it causes problems with emissions tests.
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>
Left it there for less than a day. WAY too many dead spots. Didn't want to
kill my engine. Traded it with a buddy who had a 4.0, took his stock TB and
some $$ and we were both happy.
Eric
"DougW" <post.replies@invalid.address> wrote in message
news:J3Quc.7237$W01.3085@okepread01...
> Dave Milne did pass the time by typing:
> > that's a bored out body, not a spacer as he has. I have no idea if the
bored
> > out body works (but I'm sceptical as if used with the stock air box as
there
> > is a restriction that is narrower than the normal body)
>
> They do, with limitations. Anything that helps the engine breath
> easier aids in power but what goes in must go out and the injectors
> have to be able to keep up.
>
> I wouldn't use anything larger than a 4.0 TB on the 4banger
> or your going to get one massive deadspot at the top. Stock
> fuel injectors can't keep up and it leans out.
>
> The one on my 6 is bored over, but then again it's pulling
> a lot of air though. :)
>
> > "Jersey" wrote ...
> >> What about this???
> >>
> >> http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
>
> Better to give it a try with a junkyard TB just in case
> something goes wrong. And you can go back to stock
> if it causes problems with emissions tests.
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>
#34
Guest
Posts: n/a
Re: need help about throttle body install.
A waste of time, not to mention a real hack job.
In message <AtqdndeslJtxMSbdRVn-hg@comcast.com>, "Jersey" wrote:
>What about this???
>
>http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
>
>
>"Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com...
>> Hello everybody!
>>
>> I just realized that the net might help me answer a question.
>
In message <AtqdndeslJtxMSbdRVn-hg@comcast.com>, "Jersey" wrote:
>What about this???
>
>http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
>
>
>"Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com...
>> Hello everybody!
>>
>> I just realized that the net might help me answer a question.
>
#35
Guest
Posts: n/a
Re: need help about throttle body install.
A waste of time, not to mention a real hack job.
In message <AtqdndeslJtxMSbdRVn-hg@comcast.com>, "Jersey" wrote:
>What about this???
>
>http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
>
>
>"Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com...
>> Hello everybody!
>>
>> I just realized that the net might help me answer a question.
>
In message <AtqdndeslJtxMSbdRVn-hg@comcast.com>, "Jersey" wrote:
>What about this???
>
>http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
>
>
>"Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com...
>> Hello everybody!
>>
>> I just realized that the net might help me answer a question.
>
#36
Guest
Posts: n/a
Re: need help about throttle body install.
A waste of time, not to mention a real hack job.
In message <AtqdndeslJtxMSbdRVn-hg@comcast.com>, "Jersey" wrote:
>What about this???
>
>http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
>
>
>"Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com...
>> Hello everybody!
>>
>> I just realized that the net might help me answer a question.
>
In message <AtqdndeslJtxMSbdRVn-hg@comcast.com>, "Jersey" wrote:
>What about this???
>
>http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
>
>
>"Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com...
>> Hello everybody!
>>
>> I just realized that the net might help me answer a question.
>
#37
Guest
Posts: n/a
Re: need help about throttle body install.
A waste of time, not to mention a real hack job.
In message <AtqdndeslJtxMSbdRVn-hg@comcast.com>, "Jersey" wrote:
>What about this???
>
>http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
>
>
>"Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com...
>> Hello everybody!
>>
>> I just realized that the net might help me answer a question.
>
In message <AtqdndeslJtxMSbdRVn-hg@comcast.com>, "Jersey" wrote:
>What about this???
>
>http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
>
>
>"Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com...
>> Hello everybody!
>>
>> I just realized that the net might help me answer a question.
>
#38
Guest
Posts: n/a
Re: need help about throttle body install.
There are a few of those that keep trading hands over on alt.jeep-l.
Either that or it's just one person that got suckered for one and still
can't unload it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
bllsht wrote:
>
> A waste of time, not to mention a real hack job.
>
> In message <AtqdndeslJtxMSbdRVn-hg@comcast.com>, "Jersey" wrote:
>
> >What about this???
> >
> >http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
> >
> >
> >"Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com...
> >> Hello everybody!
> >>
> >> I just realized that the net might help me answer a question.
> >
Either that or it's just one person that got suckered for one and still
can't unload it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
bllsht wrote:
>
> A waste of time, not to mention a real hack job.
>
> In message <AtqdndeslJtxMSbdRVn-hg@comcast.com>, "Jersey" wrote:
>
> >What about this???
> >
> >http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
> >
> >
> >"Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com...
> >> Hello everybody!
> >>
> >> I just realized that the net might help me answer a question.
> >
#39
Guest
Posts: n/a
Re: need help about throttle body install.
There are a few of those that keep trading hands over on alt.jeep-l.
Either that or it's just one person that got suckered for one and still
can't unload it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
bllsht wrote:
>
> A waste of time, not to mention a real hack job.
>
> In message <AtqdndeslJtxMSbdRVn-hg@comcast.com>, "Jersey" wrote:
>
> >What about this???
> >
> >http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
> >
> >
> >"Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com...
> >> Hello everybody!
> >>
> >> I just realized that the net might help me answer a question.
> >
Either that or it's just one person that got suckered for one and still
can't unload it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
bllsht wrote:
>
> A waste of time, not to mention a real hack job.
>
> In message <AtqdndeslJtxMSbdRVn-hg@comcast.com>, "Jersey" wrote:
>
> >What about this???
> >
> >http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
> >
> >
> >"Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com...
> >> Hello everybody!
> >>
> >> I just realized that the net might help me answer a question.
> >
#40
Guest
Posts: n/a
Re: need help about throttle body install.
There are a few of those that keep trading hands over on alt.jeep-l.
Either that or it's just one person that got suckered for one and still
can't unload it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
bllsht wrote:
>
> A waste of time, not to mention a real hack job.
>
> In message <AtqdndeslJtxMSbdRVn-hg@comcast.com>, "Jersey" wrote:
>
> >What about this???
> >
> >http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
> >
> >
> >"Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com...
> >> Hello everybody!
> >>
> >> I just realized that the net might help me answer a question.
> >
Either that or it's just one person that got suckered for one and still
can't unload it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
bllsht wrote:
>
> A waste of time, not to mention a real hack job.
>
> In message <AtqdndeslJtxMSbdRVn-hg@comcast.com>, "Jersey" wrote:
>
> >What about this???
> >
> >http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm
> >
> >
> >"Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com...
> >> Hello everybody!
> >>
> >> I just realized that the net might help me answer a question.
> >