Need a clutch?
10-07-2003, 08:52 PM
#11
Guest
Posts: n/a
Re: Need a clutch?
There may be adjustment issues... but they CAN be resolved. Is there a body
lift? If so, might need to extend the length of the clutch rod (from the
peddle to the bellcrank).
JimG
<ABanks5@columbus.rr.com> wrote in message
news:YYIgb.59718$uJ2.40347@fe3.columbus.rr.com...
> No it was like that when I got it. It's a YJ tub on a CJ...wonder if there
> is adjustment issues that can't be resolved. Will get under there
tomorrow.
> Thanks!
>
> "JimG" <jimg@cj7.com> wrote in message
news:6%Hgb.38$091.25@news02.roc.ny...
> > Needs adjusting... did you install it?
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
> >
> > <ABanks5@columbus.rr.com> wrote in message
> > news:oGHgb.59547$uJ2.39646@fe3.columbus.rr.com...
> > > My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab
> fine.
> > I
> > > just bought it last week. Or does it need adjusting??
> > > Allen
> > >
> > >
> >
> >
>
>
lift? If so, might need to extend the length of the clutch rod (from the
peddle to the bellcrank).
JimG
<ABanks5@columbus.rr.com> wrote in message
news:YYIgb.59718$uJ2.40347@fe3.columbus.rr.com...
> No it was like that when I got it. It's a YJ tub on a CJ...wonder if there
> is adjustment issues that can't be resolved. Will get under there
tomorrow.
> Thanks!
>
> "JimG" <jimg@cj7.com> wrote in message
news:6%Hgb.38$091.25@news02.roc.ny...
> > Needs adjusting... did you install it?
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
> >
> > <ABanks5@columbus.rr.com> wrote in message
> > news:oGHgb.59547$uJ2.39646@fe3.columbus.rr.com...
> > > My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab
> fine.
> > I
> > > just bought it last week. Or does it need adjusting??
> > > Allen
> > >
> > >
> >
> >
>
>
10-07-2003, 08:52 PM
#12
Guest
Posts: n/a
Re: Need a clutch?
There may be adjustment issues... but they CAN be resolved. Is there a body
lift? If so, might need to extend the length of the clutch rod (from the
peddle to the bellcrank).
JimG
<ABanks5@columbus.rr.com> wrote in message
news:YYIgb.59718$uJ2.40347@fe3.columbus.rr.com...
> No it was like that when I got it. It's a YJ tub on a CJ...wonder if there
> is adjustment issues that can't be resolved. Will get under there
tomorrow.
> Thanks!
>
> "JimG" <jimg@cj7.com> wrote in message
news:6%Hgb.38$091.25@news02.roc.ny...
> > Needs adjusting... did you install it?
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
> >
> > <ABanks5@columbus.rr.com> wrote in message
> > news:oGHgb.59547$uJ2.39646@fe3.columbus.rr.com...
> > > My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab
> fine.
> > I
> > > just bought it last week. Or does it need adjusting??
> > > Allen
> > >
> > >
> >
> >
>
>
lift? If so, might need to extend the length of the clutch rod (from the
peddle to the bellcrank).
JimG
<ABanks5@columbus.rr.com> wrote in message
news:YYIgb.59718$uJ2.40347@fe3.columbus.rr.com...
> No it was like that when I got it. It's a YJ tub on a CJ...wonder if there
> is adjustment issues that can't be resolved. Will get under there
tomorrow.
> Thanks!
>
> "JimG" <jimg@cj7.com> wrote in message
news:6%Hgb.38$091.25@news02.roc.ny...
> > Needs adjusting... did you install it?
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
> >
> > <ABanks5@columbus.rr.com> wrote in message
> > news:oGHgb.59547$uJ2.39646@fe3.columbus.rr.com...
> > > My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab
> fine.
> > I
> > > just bought it last week. Or does it need adjusting??
> > > Allen
> > >
> > >
> >
> >
>
>
10-07-2003, 08:52 PM
#13
Guest
Posts: n/a
Re: Need a clutch?
There may be adjustment issues... but they CAN be resolved. Is there a body
lift? If so, might need to extend the length of the clutch rod (from the
peddle to the bellcrank).
JimG
<ABanks5@columbus.rr.com> wrote in message
news:YYIgb.59718$uJ2.40347@fe3.columbus.rr.com...
> No it was like that when I got it. It's a YJ tub on a CJ...wonder if there
> is adjustment issues that can't be resolved. Will get under there
tomorrow.
> Thanks!
>
> "JimG" <jimg@cj7.com> wrote in message
news:6%Hgb.38$091.25@news02.roc.ny...
> > Needs adjusting... did you install it?
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
> >
> > <ABanks5@columbus.rr.com> wrote in message
> > news:oGHgb.59547$uJ2.39646@fe3.columbus.rr.com...
> > > My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab
> fine.
> > I
> > > just bought it last week. Or does it need adjusting??
> > > Allen
> > >
> > >
> >
> >
>
>
lift? If so, might need to extend the length of the clutch rod (from the
peddle to the bellcrank).
JimG
<ABanks5@columbus.rr.com> wrote in message
news:YYIgb.59718$uJ2.40347@fe3.columbus.rr.com...
> No it was like that when I got it. It's a YJ tub on a CJ...wonder if there
> is adjustment issues that can't be resolved. Will get under there
tomorrow.
> Thanks!
>
> "JimG" <jimg@cj7.com> wrote in message
news:6%Hgb.38$091.25@news02.roc.ny...
> > Needs adjusting... did you install it?
> >
> > --
> > JimG
> > 80' CJ-7 258 CID
> > 35" BFG MT on 15x10 Centerlines
> > D44 Rear, Dana 30 Front. SOA
> > 4.56 Gears, LockRight F&R
> > Dana 300 w/4:1 & Currie twin sticks
> > Warn X8000i w/ dual batteries
> >
> > <ABanks5@columbus.rr.com> wrote in message
> > news:oGHgb.59547$uJ2.39646@fe3.columbus.rr.com...
> > > My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab
> fine.
> > I
> > > just bought it last week. Or does it need adjusting??
> > > Allen
> > >
> > >
> >
> >
>
>
10-07-2003, 08:55 PM
#14
Guest
Posts: n/a
Re: Need a clutch?
(sorry, spelled "pedal")
"JimG" <jimg@cj7.com> wrote in message news:6dJgb.49$cZ1.26@news02.roc.ny...
> There may be adjustment issues... but they CAN be resolved. Is there a
body
> lift? If so, might need to extend the length of the clutch rod (from the
> peddle to the bellcrank).
>
> JimG
>
> <ABanks5@columbus.rr.com> wrote in message
> news:YYIgb.59718$uJ2.40347@fe3.columbus.rr.com...
> > No it was like that when I got it. It's a YJ tub on a CJ...wonder if
there
> > is adjustment issues that can't be resolved. Will get under there
> tomorrow.
> > Thanks!
> >
> > "JimG" <jimg@cj7.com> wrote in message
> news:6%Hgb.38$091.25@news02.roc.ny...
> > > Needs adjusting... did you install it?
> > >
> > > --
> > > JimG
> > > 80' CJ-7 258 CID
> > > 35" BFG MT on 15x10 Centerlines
> > > D44 Rear, Dana 30 Front. SOA
> > > 4.56 Gears, LockRight F&R
> > > Dana 300 w/4:1 & Currie twin sticks
> > > Warn X8000i w/ dual batteries
> > >
> > > <ABanks5@columbus.rr.com> wrote in message
> > > news:oGHgb.59547$uJ2.39646@fe3.columbus.rr.com...
> > > > My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab
> > fine.
> > > I
> > > > just bought it last week. Or does it need adjusting??
> > > > Allen
> > > >
> > > >
> > >
> > >
> >
> >
>
>
"JimG" <jimg@cj7.com> wrote in message news:6dJgb.49$cZ1.26@news02.roc.ny...
> There may be adjustment issues... but they CAN be resolved. Is there a
body
> lift? If so, might need to extend the length of the clutch rod (from the
> peddle to the bellcrank).
>
> JimG
>
> <ABanks5@columbus.rr.com> wrote in message
> news:YYIgb.59718$uJ2.40347@fe3.columbus.rr.com...
> > No it was like that when I got it. It's a YJ tub on a CJ...wonder if
there
> > is adjustment issues that can't be resolved. Will get under there
> tomorrow.
> > Thanks!
> >
> > "JimG" <jimg@cj7.com> wrote in message
> news:6%Hgb.38$091.25@news02.roc.ny...
> > > Needs adjusting... did you install it?
> > >
> > > --
> > > JimG
> > > 80' CJ-7 258 CID
> > > 35" BFG MT on 15x10 Centerlines
> > > D44 Rear, Dana 30 Front. SOA
> > > 4.56 Gears, LockRight F&R
> > > Dana 300 w/4:1 & Currie twin sticks
> > > Warn X8000i w/ dual batteries
> > >
> > > <ABanks5@columbus.rr.com> wrote in message
> > > news:oGHgb.59547$uJ2.39646@fe3.columbus.rr.com...
> > > > My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab
> > fine.
> > > I
> > > > just bought it last week. Or does it need adjusting??
> > > > Allen
> > > >
> > > >
> > >
> > >
> >
> >
>
>
10-07-2003, 08:55 PM
#15
Guest
Posts: n/a
Re: Need a clutch?
(sorry, spelled "pedal")
"JimG" <jimg@cj7.com> wrote in message news:6dJgb.49$cZ1.26@news02.roc.ny...
> There may be adjustment issues... but they CAN be resolved. Is there a
body
> lift? If so, might need to extend the length of the clutch rod (from the
> peddle to the bellcrank).
>
> JimG
>
> <ABanks5@columbus.rr.com> wrote in message
> news:YYIgb.59718$uJ2.40347@fe3.columbus.rr.com...
> > No it was like that when I got it. It's a YJ tub on a CJ...wonder if
there
> > is adjustment issues that can't be resolved. Will get under there
> tomorrow.
> > Thanks!
> >
> > "JimG" <jimg@cj7.com> wrote in message
> news:6%Hgb.38$091.25@news02.roc.ny...
> > > Needs adjusting... did you install it?
> > >
> > > --
> > > JimG
> > > 80' CJ-7 258 CID
> > > 35" BFG MT on 15x10 Centerlines
> > > D44 Rear, Dana 30 Front. SOA
> > > 4.56 Gears, LockRight F&R
> > > Dana 300 w/4:1 & Currie twin sticks
> > > Warn X8000i w/ dual batteries
> > >
> > > <ABanks5@columbus.rr.com> wrote in message
> > > news:oGHgb.59547$uJ2.39646@fe3.columbus.rr.com...
> > > > My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab
> > fine.
> > > I
> > > > just bought it last week. Or does it need adjusting??
> > > > Allen
> > > >
> > > >
> > >
> > >
> >
> >
>
>
"JimG" <jimg@cj7.com> wrote in message news:6dJgb.49$cZ1.26@news02.roc.ny...
> There may be adjustment issues... but they CAN be resolved. Is there a
body
> lift? If so, might need to extend the length of the clutch rod (from the
> peddle to the bellcrank).
>
> JimG
>
> <ABanks5@columbus.rr.com> wrote in message
> news:YYIgb.59718$uJ2.40347@fe3.columbus.rr.com...
> > No it was like that when I got it. It's a YJ tub on a CJ...wonder if
there
> > is adjustment issues that can't be resolved. Will get under there
> tomorrow.
> > Thanks!
> >
> > "JimG" <jimg@cj7.com> wrote in message
> news:6%Hgb.38$091.25@news02.roc.ny...
> > > Needs adjusting... did you install it?
> > >
> > > --
> > > JimG
> > > 80' CJ-7 258 CID
> > > 35" BFG MT on 15x10 Centerlines
> > > D44 Rear, Dana 30 Front. SOA
> > > 4.56 Gears, LockRight F&R
> > > Dana 300 w/4:1 & Currie twin sticks
> > > Warn X8000i w/ dual batteries
> > >
> > > <ABanks5@columbus.rr.com> wrote in message
> > > news:oGHgb.59547$uJ2.39646@fe3.columbus.rr.com...
> > > > My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab
> > fine.
> > > I
> > > > just bought it last week. Or does it need adjusting??
> > > > Allen
> > > >
> > > >
> > >
> > >
> >
> >
>
>
10-07-2003, 08:55 PM
#16
Guest
Posts: n/a
Re: Need a clutch?
(sorry, spelled "pedal")
"JimG" <jimg@cj7.com> wrote in message news:6dJgb.49$cZ1.26@news02.roc.ny...
> There may be adjustment issues... but they CAN be resolved. Is there a
body
> lift? If so, might need to extend the length of the clutch rod (from the
> peddle to the bellcrank).
>
> JimG
>
> <ABanks5@columbus.rr.com> wrote in message
> news:YYIgb.59718$uJ2.40347@fe3.columbus.rr.com...
> > No it was like that when I got it. It's a YJ tub on a CJ...wonder if
there
> > is adjustment issues that can't be resolved. Will get under there
> tomorrow.
> > Thanks!
> >
> > "JimG" <jimg@cj7.com> wrote in message
> news:6%Hgb.38$091.25@news02.roc.ny...
> > > Needs adjusting... did you install it?
> > >
> > > --
> > > JimG
> > > 80' CJ-7 258 CID
> > > 35" BFG MT on 15x10 Centerlines
> > > D44 Rear, Dana 30 Front. SOA
> > > 4.56 Gears, LockRight F&R
> > > Dana 300 w/4:1 & Currie twin sticks
> > > Warn X8000i w/ dual batteries
> > >
> > > <ABanks5@columbus.rr.com> wrote in message
> > > news:oGHgb.59547$uJ2.39646@fe3.columbus.rr.com...
> > > > My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab
> > fine.
> > > I
> > > > just bought it last week. Or does it need adjusting??
> > > > Allen
> > > >
> > > >
> > >
> > >
> >
> >
>
>
"JimG" <jimg@cj7.com> wrote in message news:6dJgb.49$cZ1.26@news02.roc.ny...
> There may be adjustment issues... but they CAN be resolved. Is there a
body
> lift? If so, might need to extend the length of the clutch rod (from the
> peddle to the bellcrank).
>
> JimG
>
> <ABanks5@columbus.rr.com> wrote in message
> news:YYIgb.59718$uJ2.40347@fe3.columbus.rr.com...
> > No it was like that when I got it. It's a YJ tub on a CJ...wonder if
there
> > is adjustment issues that can't be resolved. Will get under there
> tomorrow.
> > Thanks!
> >
> > "JimG" <jimg@cj7.com> wrote in message
> news:6%Hgb.38$091.25@news02.roc.ny...
> > > Needs adjusting... did you install it?
> > >
> > > --
> > > JimG
> > > 80' CJ-7 258 CID
> > > 35" BFG MT on 15x10 Centerlines
> > > D44 Rear, Dana 30 Front. SOA
> > > 4.56 Gears, LockRight F&R
> > > Dana 300 w/4:1 & Currie twin sticks
> > > Warn X8000i w/ dual batteries
> > >
> > > <ABanks5@columbus.rr.com> wrote in message
> > > news:oGHgb.59547$uJ2.39646@fe3.columbus.rr.com...
> > > > My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab
> > fine.
> > > I
> > > > just bought it last week. Or does it need adjusting??
> > > > Allen
> > > >
> > > >
> > >
> > >
> >
> >
>
>
10-07-2003, 09:50 PM
#17
Guest
Posts: n/a
Re: Need a clutch?
As Mike said, you want to make sure the throw out bearing's not
riding the pressure plate, so make sure you have at least an half inch
of free play at the top, released. Where it releases at is controlled by
the type of pressure plate, disk, and whether you're using bell cranks
and push or pull rods, or hydraulics to release it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ABanks5@columbus.rr.com wrote:
>
> My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab fine. I
> just bought it last week. Or does it need adjusting??
> Allen
riding the pressure plate, so make sure you have at least an half inch
of free play at the top, released. Where it releases at is controlled by
the type of pressure plate, disk, and whether you're using bell cranks
and push or pull rods, or hydraulics to release it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ABanks5@columbus.rr.com wrote:
>
> My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab fine. I
> just bought it last week. Or does it need adjusting??
> Allen
10-07-2003, 09:50 PM
#18
Guest
Posts: n/a
Re: Need a clutch?
As Mike said, you want to make sure the throw out bearing's not
riding the pressure plate, so make sure you have at least an half inch
of free play at the top, released. Where it releases at is controlled by
the type of pressure plate, disk, and whether you're using bell cranks
and push or pull rods, or hydraulics to release it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ABanks5@columbus.rr.com wrote:
>
> My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab fine. I
> just bought it last week. Or does it need adjusting??
> Allen
riding the pressure plate, so make sure you have at least an half inch
of free play at the top, released. Where it releases at is controlled by
the type of pressure plate, disk, and whether you're using bell cranks
and push or pull rods, or hydraulics to release it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ABanks5@columbus.rr.com wrote:
>
> My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab fine. I
> just bought it last week. Or does it need adjusting??
> Allen
10-07-2003, 09:50 PM
#19
Guest
Posts: n/a
Re: Need a clutch?
As Mike said, you want to make sure the throw out bearing's not
riding the pressure plate, so make sure you have at least an half inch
of free play at the top, released. Where it releases at is controlled by
the type of pressure plate, disk, and whether you're using bell cranks
and push or pull rods, or hydraulics to release it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ABanks5@columbus.rr.com wrote:
>
> My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab fine. I
> just bought it last week. Or does it need adjusting??
> Allen
riding the pressure plate, so make sure you have at least an half inch
of free play at the top, released. Where it releases at is controlled by
the type of pressure plate, disk, and whether you're using bell cranks
and push or pull rods, or hydraulics to release it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ABanks5@columbus.rr.com wrote:
>
> My CJ clutch pedal engages 1/2 inch off the floor. It seems to grab fine. I
> just bought it last week. Or does it need adjusting??
> Allen
10-08-2003, 08:25 PM
#20
Guest
Posts: n/a
Re: Need a clutch?
> Is there a body
>lift? If so, might need to extend the length of the clutch rod (from the
>peddle to the bellcrank)
Oh sure.... NOW I see this. My simple little clutch project would have gone a
lot smoother if I had known that. We ended up just cutting it and putting a
coupling nut in it. Now I also have an adjustable clutch rod.
Kinda cool. Did I say simple.... ?
Steve
79 CJ-7
>lift? If so, might need to extend the length of the clutch rod (from the
>peddle to the bellcrank)
Oh sure.... NOW I see this. My simple little clutch project would have gone a
lot smoother if I had known that. We ended up just cutting it and putting a
coupling nut in it. Now I also have an adjustable clutch rod.
Kinda cool. Did I say simple.... ?
Steve
79 CJ-7
