MPI Manifold question.
#1
Guest
Posts: n/a
MPI Manifold question.
On my new intake there are two fittings I'm not sure what they are for.
The large brass fitting on the outside edge of the manifold and a small
vacuum line above it near the throttle body, it has blue ink on it.
One of these (according to the MPI instructions diagram) is for the
brake booster (of which hasn't been installed). I'm assuming it's the
smaller of the two. In which case, what's the big one for? (no laughing)
The large brass fitting on the outside edge of the manifold and a small
vacuum line above it near the throttle body, it has blue ink on it.
One of these (according to the MPI instructions diagram) is for the
brake booster (of which hasn't been installed). I'm assuming it's the
smaller of the two. In which case, what's the big one for? (no laughing)
#2
Guest
Posts: n/a
Re: MPI Manifold question.
The larger of the two is the brake booster. The smaller, I thnk, goes to the
automatic trans to help it know when it needs to shift.
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-75D644.09202522062004@corp.supernews.com...
> On my new intake there are two fittings I'm not sure what they are for.
>
> The large brass fitting on the outside edge of the manifold and a small
> vacuum line above it near the throttle body, it has blue ink on it.
>
> One of these (according to the MPI instructions diagram) is for the
> brake booster (of which hasn't been installed). I'm assuming it's the
> smaller of the two. In which case, what's the big one for? (no laughing)
automatic trans to help it know when it needs to shift.
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-75D644.09202522062004@corp.supernews.com...
> On my new intake there are two fittings I'm not sure what they are for.
>
> The large brass fitting on the outside edge of the manifold and a small
> vacuum line above it near the throttle body, it has blue ink on it.
>
> One of these (according to the MPI instructions diagram) is for the
> brake booster (of which hasn't been installed). I'm assuming it's the
> smaller of the two. In which case, what's the big one for? (no laughing)
#3
Guest
Posts: n/a
Re: MPI Manifold question.
The larger of the two is the brake booster. The smaller, I thnk, goes to the
automatic trans to help it know when it needs to shift.
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-75D644.09202522062004@corp.supernews.com...
> On my new intake there are two fittings I'm not sure what they are for.
>
> The large brass fitting on the outside edge of the manifold and a small
> vacuum line above it near the throttle body, it has blue ink on it.
>
> One of these (according to the MPI instructions diagram) is for the
> brake booster (of which hasn't been installed). I'm assuming it's the
> smaller of the two. In which case, what's the big one for? (no laughing)
automatic trans to help it know when it needs to shift.
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-75D644.09202522062004@corp.supernews.com...
> On my new intake there are two fittings I'm not sure what they are for.
>
> The large brass fitting on the outside edge of the manifold and a small
> vacuum line above it near the throttle body, it has blue ink on it.
>
> One of these (according to the MPI instructions diagram) is for the
> brake booster (of which hasn't been installed). I'm assuming it's the
> smaller of the two. In which case, what's the big one for? (no laughing)
#4
Guest
Posts: n/a
Re: MPI Manifold question.
The larger of the two is the brake booster. The smaller, I thnk, goes to the
automatic trans to help it know when it needs to shift.
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-75D644.09202522062004@corp.supernews.com...
> On my new intake there are two fittings I'm not sure what they are for.
>
> The large brass fitting on the outside edge of the manifold and a small
> vacuum line above it near the throttle body, it has blue ink on it.
>
> One of these (according to the MPI instructions diagram) is for the
> brake booster (of which hasn't been installed). I'm assuming it's the
> smaller of the two. In which case, what's the big one for? (no laughing)
automatic trans to help it know when it needs to shift.
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-75D644.09202522062004@corp.supernews.com...
> On my new intake there are two fittings I'm not sure what they are for.
>
> The large brass fitting on the outside edge of the manifold and a small
> vacuum line above it near the throttle body, it has blue ink on it.
>
> One of these (according to the MPI instructions diagram) is for the
> brake booster (of which hasn't been installed). I'm assuming it's the
> smaller of the two. In which case, what's the big one for? (no laughing)
#5
Guest
Posts: n/a
Re: MPI Manifold question.
The larger of the two is the brake booster. The smaller, I thnk, goes to the
automatic trans to help it know when it needs to shift.
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-75D644.09202522062004@corp.supernews.com...
> On my new intake there are two fittings I'm not sure what they are for.
>
> The large brass fitting on the outside edge of the manifold and a small
> vacuum line above it near the throttle body, it has blue ink on it.
>
> One of these (according to the MPI instructions diagram) is for the
> brake booster (of which hasn't been installed). I'm assuming it's the
> smaller of the two. In which case, what's the big one for? (no laughing)
automatic trans to help it know when it needs to shift.
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-75D644.09202522062004@corp.supernews.com...
> On my new intake there are two fittings I'm not sure what they are for.
>
> The large brass fitting on the outside edge of the manifold and a small
> vacuum line above it near the throttle body, it has blue ink on it.
>
> One of these (according to the MPI instructions diagram) is for the
> brake booster (of which hasn't been installed). I'm assuming it's the
> smaller of the two. In which case, what's the big one for? (no laughing)
#6
Guest
Posts: n/a
Re: MPI Manifold question.
In article <10dghs9ptiot0e7@corp.supernews.com>,
"CRWLR" <noneofyourbusiness@yahoo.com> wrote:
> The larger of the two is the brake booster. The smaller, I thnk, goes to the
> automatic trans to help it know when it needs to shift.
O.K. I just confirmed the larger at SierraJeep.com. Thanks!
Anyone confirm the smaller MPI vacuum line on the intake near the
throttle body as for the automatic tranny?
"CRWLR" <noneofyourbusiness@yahoo.com> wrote:
> The larger of the two is the brake booster. The smaller, I thnk, goes to the
> automatic trans to help it know when it needs to shift.
O.K. I just confirmed the larger at SierraJeep.com. Thanks!
Anyone confirm the smaller MPI vacuum line on the intake near the
throttle body as for the automatic tranny?
#7
Guest
Posts: n/a
Re: MPI Manifold question.
In article <10dghs9ptiot0e7@corp.supernews.com>,
"CRWLR" <noneofyourbusiness@yahoo.com> wrote:
> The larger of the two is the brake booster. The smaller, I thnk, goes to the
> automatic trans to help it know when it needs to shift.
O.K. I just confirmed the larger at SierraJeep.com. Thanks!
Anyone confirm the smaller MPI vacuum line on the intake near the
throttle body as for the automatic tranny?
"CRWLR" <noneofyourbusiness@yahoo.com> wrote:
> The larger of the two is the brake booster. The smaller, I thnk, goes to the
> automatic trans to help it know when it needs to shift.
O.K. I just confirmed the larger at SierraJeep.com. Thanks!
Anyone confirm the smaller MPI vacuum line on the intake near the
throttle body as for the automatic tranny?
#8
Guest
Posts: n/a
Re: MPI Manifold question.
In article <10dghs9ptiot0e7@corp.supernews.com>,
"CRWLR" <noneofyourbusiness@yahoo.com> wrote:
> The larger of the two is the brake booster. The smaller, I thnk, goes to the
> automatic trans to help it know when it needs to shift.
O.K. I just confirmed the larger at SierraJeep.com. Thanks!
Anyone confirm the smaller MPI vacuum line on the intake near the
throttle body as for the automatic tranny?
"CRWLR" <noneofyourbusiness@yahoo.com> wrote:
> The larger of the two is the brake booster. The smaller, I thnk, goes to the
> automatic trans to help it know when it needs to shift.
O.K. I just confirmed the larger at SierraJeep.com. Thanks!
Anyone confirm the smaller MPI vacuum line on the intake near the
throttle body as for the automatic tranny?
#9
Guest
Posts: n/a
Re: MPI Manifold question.
In article <10dghs9ptiot0e7@corp.supernews.com>,
"CRWLR" <noneofyourbusiness@yahoo.com> wrote:
> The larger of the two is the brake booster. The smaller, I thnk, goes to the
> automatic trans to help it know when it needs to shift.
O.K. I just confirmed the larger at SierraJeep.com. Thanks!
Anyone confirm the smaller MPI vacuum line on the intake near the
throttle body as for the automatic tranny?
"CRWLR" <noneofyourbusiness@yahoo.com> wrote:
> The larger of the two is the brake booster. The smaller, I thnk, goes to the
> automatic trans to help it know when it needs to shift.
O.K. I just confirmed the larger at SierraJeep.com. Thanks!
Anyone confirm the smaller MPI vacuum line on the intake near the
throttle body as for the automatic tranny?
#10
Guest
Posts: n/a
Re: MPI Manifold question.
Think on what you need for manifold vacuum.
Brakes, PCV, air filter flaps and ?????
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeepers wrote:
>
> In article <10dghs9ptiot0e7@corp.supernews.com>,
> "CRWLR" <noneofyourbusiness@yahoo.com> wrote:
>
> > The larger of the two is the brake booster. The smaller, I thnk, goes to the
> > automatic trans to help it know when it needs to shift.
>
> O.K. I just confirmed the larger at SierraJeep.com. Thanks!
>
> Anyone confirm the smaller MPI vacuum line on the intake near the
> throttle body as for the automatic tranny?
Brakes, PCV, air filter flaps and ?????
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeepers wrote:
>
> In article <10dghs9ptiot0e7@corp.supernews.com>,
> "CRWLR" <noneofyourbusiness@yahoo.com> wrote:
>
> > The larger of the two is the brake booster. The smaller, I thnk, goes to the
> > automatic trans to help it know when it needs to shift.
>
> O.K. I just confirmed the larger at SierraJeep.com. Thanks!
>
> Anyone confirm the smaller MPI vacuum line on the intake near the
> throttle body as for the automatic tranny?