Mounting Autometer gauges.
Guest
Posts: n/a
Re: Mounting Autometer gauges.
That's "mechanical oil and electronic fuel" for clairity.
Bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2m1a47Fhhl6aU1@uni-berlin.de...
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
>
>
> Bill
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40FB6166.AC72384F@***.net...
> > Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> > really saying is that you can afford a thousand dollars worth of gauges?
> > ;-)
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > William Oliveri wrote:
> > >
> > > Hey all,
> > >
> > > I need to mount the Autometer fuel gauge on my CJ7 dash and need
hints
> on
> > > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
> best
> > > tool to cut through the dash on a CJ7?
> > >
> > > Thanks,
> > >
> > > Bill
>
>
Bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2m1a47Fhhl6aU1@uni-berlin.de...
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
>
>
> Bill
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40FB6166.AC72384F@***.net...
> > Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> > really saying is that you can afford a thousand dollars worth of gauges?
> > ;-)
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > William Oliveri wrote:
> > >
> > > Hey all,
> > >
> > > I need to mount the Autometer fuel gauge on my CJ7 dash and need
hints
> on
> > > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
> best
> > > tool to cut through the dash on a CJ7?
> > >
> > > Thanks,
> > >
> > > Bill
>
>
Guest
Posts: n/a
Re: Mounting Autometer gauges.
That's "mechanical oil and electronic fuel" for clairity.
Bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2m1a47Fhhl6aU1@uni-berlin.de...
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
>
>
> Bill
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40FB6166.AC72384F@***.net...
> > Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> > really saying is that you can afford a thousand dollars worth of gauges?
> > ;-)
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > William Oliveri wrote:
> > >
> > > Hey all,
> > >
> > > I need to mount the Autometer fuel gauge on my CJ7 dash and need
hints
> on
> > > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
> best
> > > tool to cut through the dash on a CJ7?
> > >
> > > Thanks,
> > >
> > > Bill
>
>
Bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2m1a47Fhhl6aU1@uni-berlin.de...
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
>
>
> Bill
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40FB6166.AC72384F@***.net...
> > Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> > really saying is that you can afford a thousand dollars worth of gauges?
> > ;-)
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > William Oliveri wrote:
> > >
> > > Hey all,
> > >
> > > I need to mount the Autometer fuel gauge on my CJ7 dash and need
hints
> on
> > > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
> best
> > > tool to cut through the dash on a CJ7?
> > >
> > > Thanks,
> > >
> > > Bill
>
>
Guest
Posts: n/a
Re: Mounting Autometer gauges.
That's "mechanical oil and electronic fuel" for clairity.
Bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2m1a47Fhhl6aU1@uni-berlin.de...
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
>
>
> Bill
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40FB6166.AC72384F@***.net...
> > Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> > really saying is that you can afford a thousand dollars worth of gauges?
> > ;-)
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > William Oliveri wrote:
> > >
> > > Hey all,
> > >
> > > I need to mount the Autometer fuel gauge on my CJ7 dash and need
hints
> on
> > > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
> best
> > > tool to cut through the dash on a CJ7?
> > >
> > > Thanks,
> > >
> > > Bill
>
>
Bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2m1a47Fhhl6aU1@uni-berlin.de...
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
>
>
> Bill
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40FB6166.AC72384F@***.net...
> > Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> > really saying is that you can afford a thousand dollars worth of gauges?
> > ;-)
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > William Oliveri wrote:
> > >
> > > Hey all,
> > >
> > > I need to mount the Autometer fuel gauge on my CJ7 dash and need
hints
> on
> > > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
> best
> > > tool to cut through the dash on a CJ7?
> > >
> > > Thanks,
> > >
> > > Bill
>
>
Guest
Posts: n/a
Re: Mounting Autometer gauges.
William Oliveri did pass the time by typing:
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Not bad.
And yes, your basic hole-saw from the hardware store will work on
the soft metal in your dash >IF< you keep the saw lubricated.
Always watch behind the hole, you don't want to slash a harness.
> "L.W. (ßill) ------ III" wrote ...
>> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
>> really saying is that you can afford a thousand dollars worth of gauges?
>> ;-)
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> William Oliveri wrote:
>>>
>>> Hey all,
>>>
>>> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
>>> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
>>> tool to cut through the dash on a CJ7?
>>>
>>> Thanks,
>>>
>>> Bill
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Not bad.
And yes, your basic hole-saw from the hardware store will work on
the soft metal in your dash >IF< you keep the saw lubricated.
Always watch behind the hole, you don't want to slash a harness.
> "L.W. (ßill) ------ III" wrote ...
>> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
>> really saying is that you can afford a thousand dollars worth of gauges?
>> ;-)
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> William Oliveri wrote:
>>>
>>> Hey all,
>>>
>>> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
>>> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
>>> tool to cut through the dash on a CJ7?
>>>
>>> Thanks,
>>>
>>> Bill
Guest
Posts: n/a
Re: Mounting Autometer gauges.
William Oliveri did pass the time by typing:
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Not bad.
And yes, your basic hole-saw from the hardware store will work on
the soft metal in your dash >IF< you keep the saw lubricated.
Always watch behind the hole, you don't want to slash a harness.
> "L.W. (ßill) ------ III" wrote ...
>> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
>> really saying is that you can afford a thousand dollars worth of gauges?
>> ;-)
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> William Oliveri wrote:
>>>
>>> Hey all,
>>>
>>> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
>>> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
>>> tool to cut through the dash on a CJ7?
>>>
>>> Thanks,
>>>
>>> Bill
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Not bad.
And yes, your basic hole-saw from the hardware store will work on
the soft metal in your dash >IF< you keep the saw lubricated.
Always watch behind the hole, you don't want to slash a harness.
> "L.W. (ßill) ------ III" wrote ...
>> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
>> really saying is that you can afford a thousand dollars worth of gauges?
>> ;-)
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> William Oliveri wrote:
>>>
>>> Hey all,
>>>
>>> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
>>> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
>>> tool to cut through the dash on a CJ7?
>>>
>>> Thanks,
>>>
>>> Bill
Guest
Posts: n/a
Re: Mounting Autometer gauges.
William Oliveri did pass the time by typing:
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Not bad.
And yes, your basic hole-saw from the hardware store will work on
the soft metal in your dash >IF< you keep the saw lubricated.
Always watch behind the hole, you don't want to slash a harness.
> "L.W. (ßill) ------ III" wrote ...
>> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
>> really saying is that you can afford a thousand dollars worth of gauges?
>> ;-)
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> William Oliveri wrote:
>>>
>>> Hey all,
>>>
>>> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
>>> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
>>> tool to cut through the dash on a CJ7?
>>>
>>> Thanks,
>>>
>>> Bill
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Not bad.
And yes, your basic hole-saw from the hardware store will work on
the soft metal in your dash >IF< you keep the saw lubricated.
Always watch behind the hole, you don't want to slash a harness.
> "L.W. (ßill) ------ III" wrote ...
>> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
>> really saying is that you can afford a thousand dollars worth of gauges?
>> ;-)
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> William Oliveri wrote:
>>>
>>> Hey all,
>>>
>>> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
>>> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
>>> tool to cut through the dash on a CJ7?
>>>
>>> Thanks,
>>>
>>> Bill
Guest
Posts: n/a
Re: Mounting Autometer gauges.
William Oliveri did pass the time by typing:
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Not bad.
And yes, your basic hole-saw from the hardware store will work on
the soft metal in your dash >IF< you keep the saw lubricated.
Always watch behind the hole, you don't want to slash a harness.
> "L.W. (ßill) ------ III" wrote ...
>> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
>> really saying is that you can afford a thousand dollars worth of gauges?
>> ;-)
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> William Oliveri wrote:
>>>
>>> Hey all,
>>>
>>> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
>>> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
>>> tool to cut through the dash on a CJ7?
>>>
>>> Thanks,
>>>
>>> Bill
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Not bad.
And yes, your basic hole-saw from the hardware store will work on
the soft metal in your dash >IF< you keep the saw lubricated.
Always watch behind the hole, you don't want to slash a harness.
> "L.W. (ßill) ------ III" wrote ...
>> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
>> really saying is that you can afford a thousand dollars worth of gauges?
>> ;-)
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> William Oliveri wrote:
>>>
>>> Hey all,
>>>
>>> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
>>> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
>>> tool to cut through the dash on a CJ7?
>>>
>>> Thanks,
>>>
>>> Bill
Guest
Posts: n/a
Re: Mounting Autometer gauges.
No, there are plenty for use on metal. Just go to Home Depot and look
around. You'll find quite a selection (in the power tool/bits
section). I used one for cutting a hole through my ABS shelf (1/8"
steel) when mounting my on-board-air stuff there. Works great. Just
make sure not to forget to get a center-mount bit for it! ;-)
/Bob
"William Oliveri" <wuji@bigvalley.net> wrote in message news:<2m1a47Fhhl6aU1@uni-berlin.de>...
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
>
>
> Bill
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40FB6166.AC72384F@***.net...
> > Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> > really saying is that you can afford a thousand dollars worth of gauges?
> > ;-)
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > William Oliveri wrote:
> > >
> > > Hey all,
> > >
> > > I need to mount the Autometer fuel gauge on my CJ7 dash and need hints
> on
> > > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
> best
> > > tool to cut through the dash on a CJ7?
> > >
> > > Thanks,
> > >
> > > Bill
around. You'll find quite a selection (in the power tool/bits
section). I used one for cutting a hole through my ABS shelf (1/8"
steel) when mounting my on-board-air stuff there. Works great. Just
make sure not to forget to get a center-mount bit for it! ;-)
/Bob
"William Oliveri" <wuji@bigvalley.net> wrote in message news:<2m1a47Fhhl6aU1@uni-berlin.de>...
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
>
>
> Bill
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40FB6166.AC72384F@***.net...
> > Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> > really saying is that you can afford a thousand dollars worth of gauges?
> > ;-)
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > William Oliveri wrote:
> > >
> > > Hey all,
> > >
> > > I need to mount the Autometer fuel gauge on my CJ7 dash and need hints
> on
> > > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
> best
> > > tool to cut through the dash on a CJ7?
> > >
> > > Thanks,
> > >
> > > Bill
Guest
Posts: n/a
Re: Mounting Autometer gauges.
No, there are plenty for use on metal. Just go to Home Depot and look
around. You'll find quite a selection (in the power tool/bits
section). I used one for cutting a hole through my ABS shelf (1/8"
steel) when mounting my on-board-air stuff there. Works great. Just
make sure not to forget to get a center-mount bit for it! ;-)
/Bob
"William Oliveri" <wuji@bigvalley.net> wrote in message news:<2m1a47Fhhl6aU1@uni-berlin.de>...
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
>
>
> Bill
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40FB6166.AC72384F@***.net...
> > Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> > really saying is that you can afford a thousand dollars worth of gauges?
> > ;-)
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > William Oliveri wrote:
> > >
> > > Hey all,
> > >
> > > I need to mount the Autometer fuel gauge on my CJ7 dash and need hints
> on
> > > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
> best
> > > tool to cut through the dash on a CJ7?
> > >
> > > Thanks,
> > >
> > > Bill
around. You'll find quite a selection (in the power tool/bits
section). I used one for cutting a hole through my ABS shelf (1/8"
steel) when mounting my on-board-air stuff there. Works great. Just
make sure not to forget to get a center-mount bit for it! ;-)
/Bob
"William Oliveri" <wuji@bigvalley.net> wrote in message news:<2m1a47Fhhl6aU1@uni-berlin.de>...
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
>
>
> Bill
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40FB6166.AC72384F@***.net...
> > Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> > really saying is that you can afford a thousand dollars worth of gauges?
> > ;-)
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > William Oliveri wrote:
> > >
> > > Hey all,
> > >
> > > I need to mount the Autometer fuel gauge on my CJ7 dash and need hints
> on
> > > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
> best
> > > tool to cut through the dash on a CJ7?
> > >
> > > Thanks,
> > >
> > > Bill
Guest
Posts: n/a
Re: Mounting Autometer gauges.
No, there are plenty for use on metal. Just go to Home Depot and look
around. You'll find quite a selection (in the power tool/bits
section). I used one for cutting a hole through my ABS shelf (1/8"
steel) when mounting my on-board-air stuff there. Works great. Just
make sure not to forget to get a center-mount bit for it! ;-)
/Bob
"William Oliveri" <wuji@bigvalley.net> wrote in message news:<2m1a47Fhhl6aU1@uni-berlin.de>...
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
>
>
> Bill
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40FB6166.AC72384F@***.net...
> > Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> > really saying is that you can afford a thousand dollars worth of gauges?
> > ;-)
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > William Oliveri wrote:
> > >
> > > Hey all,
> > >
> > > I need to mount the Autometer fuel gauge on my CJ7 dash and need hints
> on
> > > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
> best
> > > tool to cut through the dash on a CJ7?
> > >
> > > Thanks,
> > >
> > > Bill
around. You'll find quite a selection (in the power tool/bits
section). I used one for cutting a hole through my ABS shelf (1/8"
steel) when mounting my on-board-air stuff there. Works great. Just
make sure not to forget to get a center-mount bit for it! ;-)
/Bob
"William Oliveri" <wuji@bigvalley.net> wrote in message news:<2m1a47Fhhl6aU1@uni-berlin.de>...
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
>
>
> Bill
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40FB6166.AC72384F@***.net...
> > Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> > really saying is that you can afford a thousand dollars worth of gauges?
> > ;-)
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > William Oliveri wrote:
> > >
> > > Hey all,
> > >
> > > I need to mount the Autometer fuel gauge on my CJ7 dash and need hints
> on
> > > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
> best
> > > tool to cut through the dash on a CJ7?
> > >
> > > Thanks,
> > >
> > > Bill
