Mounting Autometer gauges.
#2
Guest
Posts: n/a
Re: Mounting Autometer gauges.
Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
really saying is that you can afford a thousand dollars worth of gauges?
;-)
God Bless America, ßill O|||||||O
mailto:--------------------
William Oliveri wrote:
>
> Hey all,
>
> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
> tool to cut through the dash on a CJ7?
>
> Thanks,
>
> Bill
really saying is that you can afford a thousand dollars worth of gauges?
;-)
God Bless America, ßill O|||||||O
mailto:--------------------
William Oliveri wrote:
>
> Hey all,
>
> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
> tool to cut through the dash on a CJ7?
>
> Thanks,
>
> Bill
#3
Guest
Posts: n/a
Re: Mounting Autometer gauges.
Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
really saying is that you can afford a thousand dollars worth of gauges?
;-)
God Bless America, ßill O|||||||O
mailto:--------------------
William Oliveri wrote:
>
> Hey all,
>
> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
> tool to cut through the dash on a CJ7?
>
> Thanks,
>
> Bill
really saying is that you can afford a thousand dollars worth of gauges?
;-)
God Bless America, ßill O|||||||O
mailto:--------------------
William Oliveri wrote:
>
> Hey all,
>
> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
> tool to cut through the dash on a CJ7?
>
> Thanks,
>
> Bill
#4
Guest
Posts: n/a
Re: Mounting Autometer gauges.
Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
really saying is that you can afford a thousand dollars worth of gauges?
;-)
God Bless America, ßill O|||||||O
mailto:--------------------
William Oliveri wrote:
>
> Hey all,
>
> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
> tool to cut through the dash on a CJ7?
>
> Thanks,
>
> Bill
really saying is that you can afford a thousand dollars worth of gauges?
;-)
God Bless America, ßill O|||||||O
mailto:--------------------
William Oliveri wrote:
>
> Hey all,
>
> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
> tool to cut through the dash on a CJ7?
>
> Thanks,
>
> Bill
#5
Guest
Posts: n/a
Re: Mounting Autometer gauges.
Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
really saying is that you can afford a thousand dollars worth of gauges?
;-)
God Bless America, ßill O|||||||O
mailto:--------------------
William Oliveri wrote:
>
> Hey all,
>
> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
> tool to cut through the dash on a CJ7?
>
> Thanks,
>
> Bill
really saying is that you can afford a thousand dollars worth of gauges?
;-)
God Bless America, ßill O|||||||O
mailto:--------------------
William Oliveri wrote:
>
> Hey all,
>
> I need to mount the Autometer fuel gauge on my CJ7 dash and need hints on
> how to cut this out. These are the 2" (or 2 1/8") gauges. What's the best
> tool to cut through the dash on a CJ7?
>
> Thanks,
>
> Bill
#6
Guest
Posts: n/a
Re: Mounting Autometer gauges.
I've seen these saws but thought they were for wood, not metal. Are they
wood and light metal, metal only, or wood and can be used for light metal?
No, on the 1k worth of gauges.
I've only got two so far (mechanical oil pressure and fuel) and probably
will get only one more for temp gauge for now.
These guys have good prices:
http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40FB6166.AC72384F@***.net...
> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> really saying is that you can afford a thousand dollars worth of gauges?
> ;-)
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> William Oliveri wrote:
> >
> > Hey all,
> >
> > I need to mount the Autometer fuel gauge on my CJ7 dash and need hints
on
> > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
best
> > tool to cut through the dash on a CJ7?
> >
> > Thanks,
> >
> > Bill
wood and light metal, metal only, or wood and can be used for light metal?
No, on the 1k worth of gauges.
I've only got two so far (mechanical oil pressure and fuel) and probably
will get only one more for temp gauge for now.
These guys have good prices:
http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40FB6166.AC72384F@***.net...
> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> really saying is that you can afford a thousand dollars worth of gauges?
> ;-)
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> William Oliveri wrote:
> >
> > Hey all,
> >
> > I need to mount the Autometer fuel gauge on my CJ7 dash and need hints
on
> > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
best
> > tool to cut through the dash on a CJ7?
> >
> > Thanks,
> >
> > Bill
#7
Guest
Posts: n/a
Re: Mounting Autometer gauges.
I've seen these saws but thought they were for wood, not metal. Are they
wood and light metal, metal only, or wood and can be used for light metal?
No, on the 1k worth of gauges.
I've only got two so far (mechanical oil pressure and fuel) and probably
will get only one more for temp gauge for now.
These guys have good prices:
http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40FB6166.AC72384F@***.net...
> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> really saying is that you can afford a thousand dollars worth of gauges?
> ;-)
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> William Oliveri wrote:
> >
> > Hey all,
> >
> > I need to mount the Autometer fuel gauge on my CJ7 dash and need hints
on
> > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
best
> > tool to cut through the dash on a CJ7?
> >
> > Thanks,
> >
> > Bill
wood and light metal, metal only, or wood and can be used for light metal?
No, on the 1k worth of gauges.
I've only got two so far (mechanical oil pressure and fuel) and probably
will get only one more for temp gauge for now.
These guys have good prices:
http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40FB6166.AC72384F@***.net...
> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> really saying is that you can afford a thousand dollars worth of gauges?
> ;-)
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> William Oliveri wrote:
> >
> > Hey all,
> >
> > I need to mount the Autometer fuel gauge on my CJ7 dash and need hints
on
> > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
best
> > tool to cut through the dash on a CJ7?
> >
> > Thanks,
> >
> > Bill
#8
Guest
Posts: n/a
Re: Mounting Autometer gauges.
I've seen these saws but thought they were for wood, not metal. Are they
wood and light metal, metal only, or wood and can be used for light metal?
No, on the 1k worth of gauges.
I've only got two so far (mechanical oil pressure and fuel) and probably
will get only one more for temp gauge for now.
These guys have good prices:
http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40FB6166.AC72384F@***.net...
> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> really saying is that you can afford a thousand dollars worth of gauges?
> ;-)
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> William Oliveri wrote:
> >
> > Hey all,
> >
> > I need to mount the Autometer fuel gauge on my CJ7 dash and need hints
on
> > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
best
> > tool to cut through the dash on a CJ7?
> >
> > Thanks,
> >
> > Bill
wood and light metal, metal only, or wood and can be used for light metal?
No, on the 1k worth of gauges.
I've only got two so far (mechanical oil pressure and fuel) and probably
will get only one more for temp gauge for now.
These guys have good prices:
http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40FB6166.AC72384F@***.net...
> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> really saying is that you can afford a thousand dollars worth of gauges?
> ;-)
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> William Oliveri wrote:
> >
> > Hey all,
> >
> > I need to mount the Autometer fuel gauge on my CJ7 dash and need hints
on
> > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
best
> > tool to cut through the dash on a CJ7?
> >
> > Thanks,
> >
> > Bill
#9
Guest
Posts: n/a
Re: Mounting Autometer gauges.
I've seen these saws but thought they were for wood, not metal. Are they
wood and light metal, metal only, or wood and can be used for light metal?
No, on the 1k worth of gauges.
I've only got two so far (mechanical oil pressure and fuel) and probably
will get only one more for temp gauge for now.
These guys have good prices:
http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40FB6166.AC72384F@***.net...
> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> really saying is that you can afford a thousand dollars worth of gauges?
> ;-)
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> William Oliveri wrote:
> >
> > Hey all,
> >
> > I need to mount the Autometer fuel gauge on my CJ7 dash and need hints
on
> > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
best
> > tool to cut through the dash on a CJ7?
> >
> > Thanks,
> >
> > Bill
wood and light metal, metal only, or wood and can be used for light metal?
No, on the 1k worth of gauges.
I've only got two so far (mechanical oil pressure and fuel) and probably
will get only one more for temp gauge for now.
These guys have good prices:
http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40FB6166.AC72384F@***.net...
> Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> really saying is that you can afford a thousand dollars worth of gauges?
> ;-)
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> William Oliveri wrote:
> >
> > Hey all,
> >
> > I need to mount the Autometer fuel gauge on my CJ7 dash and need hints
on
> > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
best
> > tool to cut through the dash on a CJ7?
> >
> > Thanks,
> >
> > Bill
#10
Guest
Posts: n/a
Re: Mounting Autometer gauges.
That's "mechanical oil and electronic fuel" for clairity.
Bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2m1a47Fhhl6aU1@uni-berlin.de...
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
>
>
> Bill
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40FB6166.AC72384F@***.net...
> > Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> > really saying is that you can afford a thousand dollars worth of gauges?
> > ;-)
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > William Oliveri wrote:
> > >
> > > Hey all,
> > >
> > > I need to mount the Autometer fuel gauge on my CJ7 dash and need
hints
> on
> > > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
> best
> > > tool to cut through the dash on a CJ7?
> > >
> > > Thanks,
> > >
> > > Bill
>
>
Bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2m1a47Fhhl6aU1@uni-berlin.de...
> I've seen these saws but thought they were for wood, not metal. Are they
> wood and light metal, metal only, or wood and can be used for light metal?
>
> No, on the 1k worth of gauges.
> I've only got two so far (mechanical oil pressure and fuel) and probably
> will get only one more for temp gauge for now.
>
> These guys have good prices:
>
> http://www.egauges.com/vdo_bld.asp?S...tra-Lite&Cart=
>
>
> Bill
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40FB6166.AC72384F@***.net...
> > Hole saw: http://www.----------.com/holeSaw.jpg Like what you're
> > really saying is that you can afford a thousand dollars worth of gauges?
> > ;-)
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > William Oliveri wrote:
> > >
> > > Hey all,
> > >
> > > I need to mount the Autometer fuel gauge on my CJ7 dash and need
hints
> on
> > > how to cut this out. These are the 2" (or 2 1/8") gauges. What's the
> best
> > > tool to cut through the dash on a CJ7?
> > >
> > > Thanks,
> > >
> > > Bill
>
>