hey Jim,
When my needle and seat went bad the carb over flowed into the manifold. it
stunk of gas big time.

--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
"Jeepster" <yj_driver_NO_SPAM@excite.com> wrote in message
news:7s8ltvsm5v253jap83he7u4bdtsqcoo3bf@4ax.com...
> A picture is worth a thousand words.
> http://members.shaw.ca/kb57/jeep.htm
>
> Drop me an e-mail if you need help with your tv problem.
>
> On Sat, 13 Dec 2003 05:07:57 GMT, "JimG" <jimg@cj7_2muchspam.com>
> wrote:
>
> >What a mess that ng is! I have prolly seen you there... I gave up when
the
> >activation no longer worked with my sub bin. Tried a few 3m's, but they
> >don't last long.
> >So... anyway , what model is your Jeep?
> >
> >JimG
> >
> >"Jeepster" <me@excite.com> wrote in message
> >news:026ltvc06heuhin825aa6sqd2qvrmggujh@4ax.com.. .
> >> I was known as Gunny in Alt.Dss.Hack .... :)
> >>
> >> On Sat, 13 Dec 2003 04:36:46 GMT, "JimG" <jimg@cj7_2muchspam.com>
> >> wrote:
> >>
> >> >You mean you gave it up when the hu bins became blacklisted?
> >> >
> >> >JimG
> >> >
> >> >"Jeepster" <me@excite.com> wrote in message
> >> >news:8i3ltvs20tqksr6ejvoo4pvivrgk0pk3ic@4ax.com.. .
> >> >> Either do I :)
> >> >>
> >> >> I did some digging around by the canister and found the P.O had
> >> >> plugged the line from the cannister back to were it tee'd off with
the
> >> >> PCV vent line back to the carb. I had enough vac line and fittings
to
> >> >> set this right so I'm hoping that is one of my problems fixed.
> >> >>
> >> >> I never had a garage in my previous town and when I moved here I
have
> >> >> this wonderful heated garage, before I fixed what was broken and
never
> >> >> had the ambition to do much else when it meant dragging the tools
out
> >> >> and working in the elements. In the last 1-1/2 years I have worked
> >> >> 1400 hours overtime and now that the new plant is up (Shell Scotford
> >> >> upgrader) and running I have a lot more time on my hands...... so
get
> >> >> use to my stupid questions I have a new hobby now.
> >> >>
> >> >> My hobby use to be American Satellite hacking but I gave that up
when
> >> >> it became illegal in Canada. :)
> >> >>
> >> >>
> >> >> On Sat, 13 Dec 2003 03:19:18 GMT, "JimG" <jimg@cj7_2muchspam.com>
> >> >> wrote:
> >> >>
> >> >> >Dang!... sounds like "Mike" questions to me... personally I would
rip
> >> >most
> >> >> >of that crap out... but then I don't have to pass a smog test.
> >> >>
> >> >
> >>
> >
>

 

hey Jim,
When my needle and seat went bad the carb over flowed into the manifold. it
stunk of gas big time.

--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
"Jeepster" <yj_driver_NO_SPAM@excite.com> wrote in message
news:7s8ltvsm5v253jap83he7u4bdtsqcoo3bf@4ax.com...
> A picture is worth a thousand words.
> http://members.shaw.ca/kb57/jeep.htm
>
> Drop me an e-mail if you need help with your tv problem.
>
> On Sat, 13 Dec 2003 05:07:57 GMT, "JimG" <jimg@cj7_2muchspam.com>
> wrote:
>
> >What a mess that ng is! I have prolly seen you there... I gave up when
the
> >activation no longer worked with my sub bin. Tried a few 3m's, but they
> >don't last long.
> >So... anyway , what model is your Jeep?
> >
> >JimG
> >
> >"Jeepster" <me@excite.com> wrote in message
> >news:026ltvc06heuhin825aa6sqd2qvrmggujh@4ax.com.. .
> >> I was known as Gunny in Alt.Dss.Hack .... :)
> >>
> >> On Sat, 13 Dec 2003 04:36:46 GMT, "JimG" <jimg@cj7_2muchspam.com>
> >> wrote:
> >>
> >> >You mean you gave it up when the hu bins became blacklisted?
> >> >
> >> >JimG
> >> >
> >> >"Jeepster" <me@excite.com> wrote in message
> >> >news:8i3ltvs20tqksr6ejvoo4pvivrgk0pk3ic@4ax.com.. .
> >> >> Either do I :)
> >> >>
> >> >> I did some digging around by the canister and found the P.O had
> >> >> plugged the line from the cannister back to were it tee'd off with
the
> >> >> PCV vent line back to the carb. I had enough vac line and fittings
to
> >> >> set this right so I'm hoping that is one of my problems fixed.
> >> >>
> >> >> I never had a garage in my previous town and when I moved here I
have
> >> >> this wonderful heated garage, before I fixed what was broken and
never
> >> >> had the ambition to do much else when it meant dragging the tools
out
> >> >> and working in the elements. In the last 1-1/2 years I have worked
> >> >> 1400 hours overtime and now that the new plant is up (Shell Scotford
> >> >> upgrader) and running I have a lot more time on my hands...... so
get
> >> >> use to my stupid questions I have a new hobby now.
> >> >>
> >> >> My hobby use to be American Satellite hacking but I gave that up
when
> >> >> it became illegal in Canada. :)
> >> >>
> >> >>
> >> >> On Sat, 13 Dec 2003 03:19:18 GMT, "JimG" <jimg@cj7_2muchspam.com>
> >> >> wrote:
> >> >>
> >> >> >Dang!... sounds like "Mike" questions to me... personally I would
rip
> >> >most
> >> >> >of that crap out... but then I don't have to pass a smog test.
> >> >>
> >> >
> >>
> >
>

 

The vehicle in question has a new carb and come to think of it I did
notice the smell before I changed out the carb it is just a bit more
noticable now that I have heat in my garage ...... wouldn't a stuck
needle valve have flooded your jeep big time ?

On Fri, 12 Dec 2003 23:39:46 -0700, "Paul Brogren" <pibrogren@msn.com>
wrote:

>hey Jim,
>When my needle and seat went bad the carb over flowed into the manifold. it
>stunk of gas big time.

 

The vehicle in question has a new carb and come to think of it I did
notice the smell before I changed out the carb it is just a bit more
noticable now that I have heat in my garage ...... wouldn't a stuck
needle valve have flooded your jeep big time ?

On Fri, 12 Dec 2003 23:39:46 -0700, "Paul Brogren" <pibrogren@msn.com>
wrote:

>hey Jim,
>When my needle and seat went bad the carb over flowed into the manifold. it
>stunk of gas big time.

 

The vehicle in question has a new carb and come to think of it I did
notice the smell before I changed out the carb it is just a bit more
noticable now that I have heat in my garage ...... wouldn't a stuck
needle valve have flooded your jeep big time ?

On Fri, 12 Dec 2003 23:39:46 -0700, "Paul Brogren" <pibrogren@msn.com>
wrote:

>hey Jim,
>When my needle and seat went bad the carb over flowed into the manifold. it
>stunk of gas big time.

 

On Fri, 12 Dec 2003 21:41:11 -0700, Jeepster <me@excite.com> wrote:

>I was known as Gunny in Alt.Dss.Hack .... :)

Semper Fi?

 

On Fri, 12 Dec 2003 21:41:11 -0700, Jeepster <me@excite.com> wrote:

>I was known as Gunny in Alt.Dss.Hack .... :)

Semper Fi?

 

On Fri, 12 Dec 2003 21:41:11 -0700, Jeepster <me@excite.com> wrote:

>I was known as Gunny in Alt.Dss.Hack .... :)

Semper Fi?

 

Being in Canada myself, have to ask, what make top is that and were did
you get it, very nice fit, would look good on my CJ

"Jeepster" <yj_driver_NO_SPAM@excite.com> wrote in message
news:7s8ltvsm5v253jap83he7u4bdtsqcoo3bf@4ax.com...
> A picture is worth a thousand words.
> http://members.shaw.ca/kb57/jeep.htm
>
> Drop me an e-mail if you need help with your tv problem.
>
> On Sat, 13 Dec 2003 05:07:57 GMT, "JimG" <jimg@cj7_2muchspam.com>
> wrote:
>
> >What a mess that ng is! I have prolly seen you there... I gave up when
the
> >activation no longer worked with my sub bin. Tried a few 3m's, but they
> >don't last long.
> >So... anyway , what model is your Jeep?
> >
> >JimG
> >
> >"Jeepster" <me@excite.com> wrote in message
> >news:026ltvc06heuhin825aa6sqd2qvrmggujh@4ax.com.. .
> >> I was known as Gunny in Alt.Dss.Hack .... :)
> >>
> >> On Sat, 13 Dec 2003 04:36:46 GMT, "JimG" <jimg@cj7_2muchspam.com>
> >> wrote:
> >>
> >> >You mean you gave it up when the hu bins became blacklisted?
> >> >
> >> >JimG
> >> >
> >> >"Jeepster" <me@excite.com> wrote in message
> >> >news:8i3ltvs20tqksr6ejvoo4pvivrgk0pk3ic@4ax.com.. .
> >> >> Either do I :)
> >> >>
> >> >> I did some digging around by the canister and found the P.O had
> >> >> plugged the line from the cannister back to were it tee'd off with
the
> >> >> PCV vent line back to the carb. I had enough vac line and fittings
to
> >> >> set this right so I'm hoping that is one of my problems fixed.
> >> >>
> >> >> I never had a garage in my previous town and when I moved here I
have
> >> >> this wonderful heated garage, before I fixed what was broken and
never
> >> >> had the ambition to do much else when it meant dragging the tools
out
> >> >> and working in the elements. In the last 1-1/2 years I have worked
> >> >> 1400 hours overtime and now that the new plant is up (Shell Scotford
> >> >> upgrader) and running I have a lot more time on my hands...... so
get
> >> >> use to my stupid questions I have a new hobby now.
> >> >>
> >> >> My hobby use to be American Satellite hacking but I gave that up
when
> >> >> it became illegal in Canada. :)
> >> >>
> >> >>
> >> >> On Sat, 13 Dec 2003 03:19:18 GMT, "JimG" <jimg@cj7_2muchspam.com>
> >> >> wrote:
> >> >>
> >> >> >Dang!... sounds like "Mike" questions to me... personally I would
rip
> >> >most
> >> >> >of that crap out... but then I don't have to pass a smog test.
> >> >>
> >> >
> >>
> >
>

 

Being in Canada myself, have to ask, what make top is that and were did
you get it, very nice fit, would look good on my CJ

"Jeepster" <yj_driver_NO_SPAM@excite.com> wrote in message
news:7s8ltvsm5v253jap83he7u4bdtsqcoo3bf@4ax.com...
> A picture is worth a thousand words.
> http://members.shaw.ca/kb57/jeep.htm
>
> Drop me an e-mail if you need help with your tv problem.
>
> On Sat, 13 Dec 2003 05:07:57 GMT, "JimG" <jimg@cj7_2muchspam.com>
> wrote:
>
> >What a mess that ng is! I have prolly seen you there... I gave up when
the
> >activation no longer worked with my sub bin. Tried a few 3m's, but they
> >don't last long.
> >So... anyway , what model is your Jeep?
> >
> >JimG
> >
> >"Jeepster" <me@excite.com> wrote in message
> >news:026ltvc06heuhin825aa6sqd2qvrmggujh@4ax.com.. .
> >> I was known as Gunny in Alt.Dss.Hack .... :)
> >>
> >> On Sat, 13 Dec 2003 04:36:46 GMT, "JimG" <jimg@cj7_2muchspam.com>
> >> wrote:
> >>
> >> >You mean you gave it up when the hu bins became blacklisted?
> >> >
> >> >JimG
> >> >
> >> >"Jeepster" <me@excite.com> wrote in message
> >> >news:8i3ltvs20tqksr6ejvoo4pvivrgk0pk3ic@4ax.com.. .
> >> >> Either do I :)
> >> >>
> >> >> I did some digging around by the canister and found the P.O had
> >> >> plugged the line from the cannister back to were it tee'd off with
the
> >> >> PCV vent line back to the carb. I had enough vac line and fittings
to
> >> >> set this right so I'm hoping that is one of my problems fixed.
> >> >>
> >> >> I never had a garage in my previous town and when I moved here I
have
> >> >> this wonderful heated garage, before I fixed what was broken and
never
> >> >> had the ambition to do much else when it meant dragging the tools
out
> >> >> and working in the elements. In the last 1-1/2 years I have worked
> >> >> 1400 hours overtime and now that the new plant is up (Shell Scotford
> >> >> upgrader) and running I have a lot more time on my hands...... so
get
> >> >> use to my stupid questions I have a new hobby now.
> >> >>
> >> >> My hobby use to be American Satellite hacking but I gave that up
when
> >> >> it became illegal in Canada. :)
> >> >>
> >> >>
> >> >> On Sat, 13 Dec 2003 03:19:18 GMT, "JimG" <jimg@cj7_2muchspam.com>
> >> >> wrote:
> >> >>
> >> >> >Dang!... sounds like "Mike" questions to me... personally I would
rip
> >> >most
> >> >> >of that crap out... but then I don't have to pass a smog test.
> >> >>
> >> >
> >>
> >
>