|
More Questions
I have really started to get interested in this beast of a vehicle and
the numberous vacuum lines etc and with this I'm starting to notice a lot of potential problems. 1.) My vehicle stinks like gas when in the garage and I know there are no leaks so I can assume that the evap canister is plugged? Or is it possible it is not purging and is just sitting there full of gas? If it isn't purging could it be a faulty CTO valve? 2.) Looking at a diagram of vac / vapour line routing for a YJ I see that the PCV valve should be tee'd over to the evap cannister. On my routing I can follow the PCV vent line (located at front end of valve cover) directly to the carb (No tee to evap cannister) 3.) I also have a broken nipple on the TVS valve so I imagine this is one of the reasons why the EGR valve is not moving. Could I bypass the TVS valve and have the EGR function all the time? I went to 3 places 2 of them didn't know what the TVS valve was and Canuck Tire said the part was discontinued. Thanks |
Re: More Questions
Dang!... sounds like "Mike" questions to me... personally I would rip most
of that crap out... but then I don't have to pass a smog test. -- JimG 80' CJ-7 258 CID 35" BFG MT on 15x10 Centerlines D44 Rear, Dana 30 Front. SOA 4.56 Gears, LockRight F&R Dana 300 w/4:1 & Currie twin sticks Warn X8000i w/ dual batteries "Jeepster" <me@excite.com> wrote in message news:ekvktvovovc8o9o36bln4012nl3unu59tl@4ax.com... > I have really started to get interested in this beast of a vehicle and > the numberous vacuum lines etc and with this I'm starting to notice a > lot of potential problems. > > 1.) My vehicle stinks like gas when in the garage and I know there are > no leaks so I can assume that the evap canister is plugged? Or is it > possible it is not purging and is just sitting there full of gas? > If it isn't purging could it be a faulty CTO valve? > > 2.) Looking at a diagram of vac / vapour line routing for a YJ I see > that the PCV valve should be tee'd over to the evap cannister. On my > routing I can follow the PCV vent line (located at front end of valve > cover) directly to the carb (No tee to evap cannister) > > 3.) I also have a broken nipple on the TVS valve so I imagine this is > one of the reasons why the EGR valve is not moving. Could I bypass the > TVS valve and have the EGR function all the time? I went to 3 places 2 > of them didn't know what the TVS valve was and Canuck Tire said the > part was discontinued. > > Thanks |
Re: More Questions
Dang!... sounds like "Mike" questions to me... personally I would rip most
of that crap out... but then I don't have to pass a smog test. -- JimG 80' CJ-7 258 CID 35" BFG MT on 15x10 Centerlines D44 Rear, Dana 30 Front. SOA 4.56 Gears, LockRight F&R Dana 300 w/4:1 & Currie twin sticks Warn X8000i w/ dual batteries "Jeepster" <me@excite.com> wrote in message news:ekvktvovovc8o9o36bln4012nl3unu59tl@4ax.com... > I have really started to get interested in this beast of a vehicle and > the numberous vacuum lines etc and with this I'm starting to notice a > lot of potential problems. > > 1.) My vehicle stinks like gas when in the garage and I know there are > no leaks so I can assume that the evap canister is plugged? Or is it > possible it is not purging and is just sitting there full of gas? > If it isn't purging could it be a faulty CTO valve? > > 2.) Looking at a diagram of vac / vapour line routing for a YJ I see > that the PCV valve should be tee'd over to the evap cannister. On my > routing I can follow the PCV vent line (located at front end of valve > cover) directly to the carb (No tee to evap cannister) > > 3.) I also have a broken nipple on the TVS valve so I imagine this is > one of the reasons why the EGR valve is not moving. Could I bypass the > TVS valve and have the EGR function all the time? I went to 3 places 2 > of them didn't know what the TVS valve was and Canuck Tire said the > part was discontinued. > > Thanks |
Re: More Questions
Dang!... sounds like "Mike" questions to me... personally I would rip most
of that crap out... but then I don't have to pass a smog test. -- JimG 80' CJ-7 258 CID 35" BFG MT on 15x10 Centerlines D44 Rear, Dana 30 Front. SOA 4.56 Gears, LockRight F&R Dana 300 w/4:1 & Currie twin sticks Warn X8000i w/ dual batteries "Jeepster" <me@excite.com> wrote in message news:ekvktvovovc8o9o36bln4012nl3unu59tl@4ax.com... > I have really started to get interested in this beast of a vehicle and > the numberous vacuum lines etc and with this I'm starting to notice a > lot of potential problems. > > 1.) My vehicle stinks like gas when in the garage and I know there are > no leaks so I can assume that the evap canister is plugged? Or is it > possible it is not purging and is just sitting there full of gas? > If it isn't purging could it be a faulty CTO valve? > > 2.) Looking at a diagram of vac / vapour line routing for a YJ I see > that the PCV valve should be tee'd over to the evap cannister. On my > routing I can follow the PCV vent line (located at front end of valve > cover) directly to the carb (No tee to evap cannister) > > 3.) I also have a broken nipple on the TVS valve so I imagine this is > one of the reasons why the EGR valve is not moving. Could I bypass the > TVS valve and have the EGR function all the time? I went to 3 places 2 > of them didn't know what the TVS valve was and Canuck Tire said the > part was discontinued. > > Thanks |
Re: More Questions
Either do I :)
I did some digging around by the canister and found the P.O had plugged the line from the cannister back to were it tee'd off with the PCV vent line back to the carb. I had enough vac line and fittings to set this right so I'm hoping that is one of my problems fixed. I never had a garage in my previous town and when I moved here I have this wonderful heated garage, before I fixed what was broken and never had the ambition to do much else when it meant dragging the tools out and working in the elements. In the last 1-1/2 years I have worked 1400 hours overtime and now that the new plant is up (Shell Scotford upgrader) and running I have a lot more time on my hands...... so get use to my stupid questions I have a new hobby now. My hobby use to be American Satellite hacking but I gave that up when it became illegal in Canada. :) On Sat, 13 Dec 2003 03:19:18 GMT, "JimG" <jimg@cj7_2muchspam.com> wrote: >Dang!... sounds like "Mike" questions to me... personally I would rip most >of that crap out... but then I don't have to pass a smog test. |
Re: More Questions
Either do I :)
I did some digging around by the canister and found the P.O had plugged the line from the cannister back to were it tee'd off with the PCV vent line back to the carb. I had enough vac line and fittings to set this right so I'm hoping that is one of my problems fixed. I never had a garage in my previous town and when I moved here I have this wonderful heated garage, before I fixed what was broken and never had the ambition to do much else when it meant dragging the tools out and working in the elements. In the last 1-1/2 years I have worked 1400 hours overtime and now that the new plant is up (Shell Scotford upgrader) and running I have a lot more time on my hands...... so get use to my stupid questions I have a new hobby now. My hobby use to be American Satellite hacking but I gave that up when it became illegal in Canada. :) On Sat, 13 Dec 2003 03:19:18 GMT, "JimG" <jimg@cj7_2muchspam.com> wrote: >Dang!... sounds like "Mike" questions to me... personally I would rip most >of that crap out... but then I don't have to pass a smog test. |
Re: More Questions
Either do I :)
I did some digging around by the canister and found the P.O had plugged the line from the cannister back to were it tee'd off with the PCV vent line back to the carb. I had enough vac line and fittings to set this right so I'm hoping that is one of my problems fixed. I never had a garage in my previous town and when I moved here I have this wonderful heated garage, before I fixed what was broken and never had the ambition to do much else when it meant dragging the tools out and working in the elements. In the last 1-1/2 years I have worked 1400 hours overtime and now that the new plant is up (Shell Scotford upgrader) and running I have a lot more time on my hands...... so get use to my stupid questions I have a new hobby now. My hobby use to be American Satellite hacking but I gave that up when it became illegal in Canada. :) On Sat, 13 Dec 2003 03:19:18 GMT, "JimG" <jimg@cj7_2muchspam.com> wrote: >Dang!... sounds like "Mike" questions to me... personally I would rip most >of that crap out... but then I don't have to pass a smog test. |
Re: More Questions
You mean you gave it up when the hu bins became blacklisted?
JimG "Jeepster" <me@excite.com> wrote in message news:8i3ltvs20tqksr6ejvoo4pvivrgk0pk3ic@4ax.com... > Either do I :) > > I did some digging around by the canister and found the P.O had > plugged the line from the cannister back to were it tee'd off with the > PCV vent line back to the carb. I had enough vac line and fittings to > set this right so I'm hoping that is one of my problems fixed. > > I never had a garage in my previous town and when I moved here I have > this wonderful heated garage, before I fixed what was broken and never > had the ambition to do much else when it meant dragging the tools out > and working in the elements. In the last 1-1/2 years I have worked > 1400 hours overtime and now that the new plant is up (Shell Scotford > upgrader) and running I have a lot more time on my hands...... so get > use to my stupid questions I have a new hobby now. > > My hobby use to be American Satellite hacking but I gave that up when > it became illegal in Canada. :) > > > On Sat, 13 Dec 2003 03:19:18 GMT, "JimG" <jimg@cj7_2muchspam.com> > wrote: > > >Dang!... sounds like "Mike" questions to me... personally I would rip most > >of that crap out... but then I don't have to pass a smog test. > |
Re: More Questions
You mean you gave it up when the hu bins became blacklisted?
JimG "Jeepster" <me@excite.com> wrote in message news:8i3ltvs20tqksr6ejvoo4pvivrgk0pk3ic@4ax.com... > Either do I :) > > I did some digging around by the canister and found the P.O had > plugged the line from the cannister back to were it tee'd off with the > PCV vent line back to the carb. I had enough vac line and fittings to > set this right so I'm hoping that is one of my problems fixed. > > I never had a garage in my previous town and when I moved here I have > this wonderful heated garage, before I fixed what was broken and never > had the ambition to do much else when it meant dragging the tools out > and working in the elements. In the last 1-1/2 years I have worked > 1400 hours overtime and now that the new plant is up (Shell Scotford > upgrader) and running I have a lot more time on my hands...... so get > use to my stupid questions I have a new hobby now. > > My hobby use to be American Satellite hacking but I gave that up when > it became illegal in Canada. :) > > > On Sat, 13 Dec 2003 03:19:18 GMT, "JimG" <jimg@cj7_2muchspam.com> > wrote: > > >Dang!... sounds like "Mike" questions to me... personally I would rip most > >of that crap out... but then I don't have to pass a smog test. > |
Re: More Questions
You mean you gave it up when the hu bins became blacklisted?
JimG "Jeepster" <me@excite.com> wrote in message news:8i3ltvs20tqksr6ejvoo4pvivrgk0pk3ic@4ax.com... > Either do I :) > > I did some digging around by the canister and found the P.O had > plugged the line from the cannister back to were it tee'd off with the > PCV vent line back to the carb. I had enough vac line and fittings to > set this right so I'm hoping that is one of my problems fixed. > > I never had a garage in my previous town and when I moved here I have > this wonderful heated garage, before I fixed what was broken and never > had the ambition to do much else when it meant dragging the tools out > and working in the elements. In the last 1-1/2 years I have worked > 1400 hours overtime and now that the new plant is up (Shell Scotford > upgrader) and running I have a lot more time on my hands...... so get > use to my stupid questions I have a new hobby now. > > My hobby use to be American Satellite hacking but I gave that up when > it became illegal in Canada. :) > > > On Sat, 13 Dec 2003 03:19:18 GMT, "JimG" <jimg@cj7_2muchspam.com> > wrote: > > >Dang!... sounds like "Mike" questions to me... personally I would rip most > >of that crap out... but then I don't have to pass a smog test. > |
| All times are GMT -4. The time now is 10:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands