This might not have been a good idea, but...
#271
Guest
Posts: n/a
Re: This might not have been a good idea, but...
Good plan!! There's nothing on your Jeep body that can't be fixed. It's
WAY harder to fix the driver's and passenger's bodies.
travis wrote:
> I got lucky. I didn't support the full weight (obviously) of my Jeep,
> I just caught it soon enough to be able to push it back to the
> teeter-totter position. A friend of mine locally just told me via
> email that he happens to have an extra full roll cage. I plan on
> checking it out and if I get in the "uh oh, I'm about to roll"
> position again I'll just sit back and enjoy the ride instead of trying
> to Hulk-out of the situation.
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: probably from g. p. (abbreviation of general purpose)
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
WAY harder to fix the driver's and passenger's bodies.
travis wrote:
> I got lucky. I didn't support the full weight (obviously) of my Jeep,
> I just caught it soon enough to be able to push it back to the
> teeter-totter position. A friend of mine locally just told me via
> email that he happens to have an extra full roll cage. I plan on
> checking it out and if I get in the "uh oh, I'm about to roll"
> position again I'll just sit back and enjoy the ride instead of trying
> to Hulk-out of the situation.
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: probably from g. p. (abbreviation of general purpose)
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
#272
Guest
Posts: n/a
Re: This might not have been a good idea, but...
"travis" <travist34removethis@hotmail.com> wrote in message
news:jkbdqvose61kuh49i6c3ru3smpgderrvon@4ax.com...
> On Mon, 3 Nov 2003 10:45:28 -0800, "CRWLR" <beerman@yahoo.com>
> shared the following:
>
> >I am glad you don't go wheeling around here.
> >
> >Think about what you did. You fully expected that you could support the
> >weight of your vehicle. Most of us can't support our own body wieght,
some
> >of us can support not only our own weight but that of our spouse as well.
> >Some is us can support our own weight, and the weight of our spouse, and
> >still be able to carry a sack or two of cement. None of us can carry our
> >car. You faced death, and won.
>
> I got lucky. I didn't support the full weight (obviously) of my Jeep,
Obviously you didn't support the weight of your Jeep, but it was still
moving when you put your feet out, and you could have found yourself trying
to hold it up.
Part of the fun and games is to balance your Jeep at just the right spot
where it will hold itself up, but that you can rock it easily. Basically, I
have put my CJ on the sweet spot several times, kind of like balancing a
'fridge on a hand truck. If the 'fridge is too far one way, it falls back
onto its feet, too far the other way and you get crushed. The sweet spot is
where the load is entirely on the wheels and you can rock the 'fridge back
and forth in a narrow range. Getting your Jeep into this narroow range can
be a delight, but because the range is quite narrow, you want to be sure you
are fully inside the protective confines of the roll cage.
NEVER EVER UNDER ANY CIRCUNSTANCE should you or anybody else put a arm or
leg outside the vehicle in an attempt to keep it upright. This is a recipe
for serious injury, maybe even a serious death.
> I just caught it soon enough to be able to push it back to the
> teeter-totter position. A friend of mine locally just told me via
> email that he happens to have an extra full roll cage. I plan on
> checking it out and if I get in the "uh oh, I'm about to roll"
> position again I'll just sit back and enjoy the ride instead of trying
> to Hulk-out of the situation.
>
Roll overs generally follow an episode of bouncing. If you are climbing a
hill, and begin to bounce, then you are ripe for a roll over. Bouncing can
result in broken Ujoints, which then results in a rapid decent backwards,
which leads to a roll over. You should try to avoid bouncing, especially
while hill climbing.
I always hit the hill on my first approach in a manner that is probably too
slow to make it, but if I don't make it, I get a good feel for what is going
to happen if I give more gas. If I stall out the motor, then I shift into R,
refire, and back down. I make a second attempt based upon the experience of
the first, if the hill is too steep, I take the bypass. If the hill causes
my Jeep to bounce, I take the bypass. If I simply bog down because I am
going too slow, I hit it again with more gas, and walk right up.
#273
Guest
Posts: n/a
Re: This might not have been a good idea, but...
"travis" <travist34removethis@hotmail.com> wrote in message
news:jkbdqvose61kuh49i6c3ru3smpgderrvon@4ax.com...
> On Mon, 3 Nov 2003 10:45:28 -0800, "CRWLR" <beerman@yahoo.com>
> shared the following:
>
> >I am glad you don't go wheeling around here.
> >
> >Think about what you did. You fully expected that you could support the
> >weight of your vehicle. Most of us can't support our own body wieght,
some
> >of us can support not only our own weight but that of our spouse as well.
> >Some is us can support our own weight, and the weight of our spouse, and
> >still be able to carry a sack or two of cement. None of us can carry our
> >car. You faced death, and won.
>
> I got lucky. I didn't support the full weight (obviously) of my Jeep,
Obviously you didn't support the weight of your Jeep, but it was still
moving when you put your feet out, and you could have found yourself trying
to hold it up.
Part of the fun and games is to balance your Jeep at just the right spot
where it will hold itself up, but that you can rock it easily. Basically, I
have put my CJ on the sweet spot several times, kind of like balancing a
'fridge on a hand truck. If the 'fridge is too far one way, it falls back
onto its feet, too far the other way and you get crushed. The sweet spot is
where the load is entirely on the wheels and you can rock the 'fridge back
and forth in a narrow range. Getting your Jeep into this narroow range can
be a delight, but because the range is quite narrow, you want to be sure you
are fully inside the protective confines of the roll cage.
NEVER EVER UNDER ANY CIRCUNSTANCE should you or anybody else put a arm or
leg outside the vehicle in an attempt to keep it upright. This is a recipe
for serious injury, maybe even a serious death.
> I just caught it soon enough to be able to push it back to the
> teeter-totter position. A friend of mine locally just told me via
> email that he happens to have an extra full roll cage. I plan on
> checking it out and if I get in the "uh oh, I'm about to roll"
> position again I'll just sit back and enjoy the ride instead of trying
> to Hulk-out of the situation.
>
Roll overs generally follow an episode of bouncing. If you are climbing a
hill, and begin to bounce, then you are ripe for a roll over. Bouncing can
result in broken Ujoints, which then results in a rapid decent backwards,
which leads to a roll over. You should try to avoid bouncing, especially
while hill climbing.
I always hit the hill on my first approach in a manner that is probably too
slow to make it, but if I don't make it, I get a good feel for what is going
to happen if I give more gas. If I stall out the motor, then I shift into R,
refire, and back down. I make a second attempt based upon the experience of
the first, if the hill is too steep, I take the bypass. If the hill causes
my Jeep to bounce, I take the bypass. If I simply bog down because I am
going too slow, I hit it again with more gas, and walk right up.
#274
Guest
Posts: n/a
Re: This might not have been a good idea, but...
"travis" <travist34removethis@hotmail.com> wrote in message
news:jkbdqvose61kuh49i6c3ru3smpgderrvon@4ax.com...
> On Mon, 3 Nov 2003 10:45:28 -0800, "CRWLR" <beerman@yahoo.com>
> shared the following:
>
> >I am glad you don't go wheeling around here.
> >
> >Think about what you did. You fully expected that you could support the
> >weight of your vehicle. Most of us can't support our own body wieght,
some
> >of us can support not only our own weight but that of our spouse as well.
> >Some is us can support our own weight, and the weight of our spouse, and
> >still be able to carry a sack or two of cement. None of us can carry our
> >car. You faced death, and won.
>
> I got lucky. I didn't support the full weight (obviously) of my Jeep,
Obviously you didn't support the weight of your Jeep, but it was still
moving when you put your feet out, and you could have found yourself trying
to hold it up.
Part of the fun and games is to balance your Jeep at just the right spot
where it will hold itself up, but that you can rock it easily. Basically, I
have put my CJ on the sweet spot several times, kind of like balancing a
'fridge on a hand truck. If the 'fridge is too far one way, it falls back
onto its feet, too far the other way and you get crushed. The sweet spot is
where the load is entirely on the wheels and you can rock the 'fridge back
and forth in a narrow range. Getting your Jeep into this narroow range can
be a delight, but because the range is quite narrow, you want to be sure you
are fully inside the protective confines of the roll cage.
NEVER EVER UNDER ANY CIRCUNSTANCE should you or anybody else put a arm or
leg outside the vehicle in an attempt to keep it upright. This is a recipe
for serious injury, maybe even a serious death.
> I just caught it soon enough to be able to push it back to the
> teeter-totter position. A friend of mine locally just told me via
> email that he happens to have an extra full roll cage. I plan on
> checking it out and if I get in the "uh oh, I'm about to roll"
> position again I'll just sit back and enjoy the ride instead of trying
> to Hulk-out of the situation.
>
Roll overs generally follow an episode of bouncing. If you are climbing a
hill, and begin to bounce, then you are ripe for a roll over. Bouncing can
result in broken Ujoints, which then results in a rapid decent backwards,
which leads to a roll over. You should try to avoid bouncing, especially
while hill climbing.
I always hit the hill on my first approach in a manner that is probably too
slow to make it, but if I don't make it, I get a good feel for what is going
to happen if I give more gas. If I stall out the motor, then I shift into R,
refire, and back down. I make a second attempt based upon the experience of
the first, if the hill is too steep, I take the bypass. If the hill causes
my Jeep to bounce, I take the bypass. If I simply bog down because I am
going too slow, I hit it again with more gas, and walk right up.
#275
Guest
Posts: n/a
Re: This might not have been a good idea, but...
With each new passenger, I go through the routine of explaining
what the chicken bar is for, and when we then fall over, I'm screaming
at them to tuck their arms in, it works.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
CRWLR wrote:
>
> Obviously you didn't support the weight of your Jeep, but it was still
> moving when you put your feet out, and you could have found yourself trying
> to hold it up.
>
> Part of the fun and games is to balance your Jeep at just the right spot
> where it will hold itself up, but that you can rock it easily. Basically, I
> have put my CJ on the sweet spot several times, kind of like balancing a
> 'fridge on a hand truck. If the 'fridge is too far one way, it falls back
> onto its feet, too far the other way and you get crushed. The sweet spot is
> where the load is entirely on the wheels and you can rock the 'fridge back
> and forth in a narrow range. Getting your Jeep into this narroow range can
> be a delight, but because the range is quite narrow, you want to be sure you
> are fully inside the protective confines of the roll cage.
>
> NEVER EVER UNDER ANY CIRCUNSTANCE should you or anybody else put a arm or
> leg outside the vehicle in an attempt to keep it upright. This is a recipe
> for serious injury, maybe even a serious death.
>
> > I just caught it soon enough to be able to push it back to the
> > teeter-totter position. A friend of mine locally just told me via
> > email that he happens to have an extra full roll cage. I plan on
> > checking it out and if I get in the "uh oh, I'm about to roll"
> > position again I'll just sit back and enjoy the ride instead of trying
> > to Hulk-out of the situation.
> >
>
> Roll overs generally follow an episode of bouncing. If you are climbing a
> hill, and begin to bounce, then you are ripe for a roll over. Bouncing can
> result in broken Ujoints, which then results in a rapid decent backwards,
> which leads to a roll over. You should try to avoid bouncing, especially
> while hill climbing.
>
> I always hit the hill on my first approach in a manner that is probably too
> slow to make it, but if I don't make it, I get a good feel for what is going
> to happen if I give more gas. If I stall out the motor, then I shift into R,
> refire, and back down. I make a second attempt based upon the experience of
> the first, if the hill is too steep, I take the bypass. If the hill causes
> my Jeep to bounce, I take the bypass. If I simply bog down because I am
> going too slow, I hit it again with more gas, and walk right up.
what the chicken bar is for, and when we then fall over, I'm screaming
at them to tuck their arms in, it works.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
CRWLR wrote:
>
> Obviously you didn't support the weight of your Jeep, but it was still
> moving when you put your feet out, and you could have found yourself trying
> to hold it up.
>
> Part of the fun and games is to balance your Jeep at just the right spot
> where it will hold itself up, but that you can rock it easily. Basically, I
> have put my CJ on the sweet spot several times, kind of like balancing a
> 'fridge on a hand truck. If the 'fridge is too far one way, it falls back
> onto its feet, too far the other way and you get crushed. The sweet spot is
> where the load is entirely on the wheels and you can rock the 'fridge back
> and forth in a narrow range. Getting your Jeep into this narroow range can
> be a delight, but because the range is quite narrow, you want to be sure you
> are fully inside the protective confines of the roll cage.
>
> NEVER EVER UNDER ANY CIRCUNSTANCE should you or anybody else put a arm or
> leg outside the vehicle in an attempt to keep it upright. This is a recipe
> for serious injury, maybe even a serious death.
>
> > I just caught it soon enough to be able to push it back to the
> > teeter-totter position. A friend of mine locally just told me via
> > email that he happens to have an extra full roll cage. I plan on
> > checking it out and if I get in the "uh oh, I'm about to roll"
> > position again I'll just sit back and enjoy the ride instead of trying
> > to Hulk-out of the situation.
> >
>
> Roll overs generally follow an episode of bouncing. If you are climbing a
> hill, and begin to bounce, then you are ripe for a roll over. Bouncing can
> result in broken Ujoints, which then results in a rapid decent backwards,
> which leads to a roll over. You should try to avoid bouncing, especially
> while hill climbing.
>
> I always hit the hill on my first approach in a manner that is probably too
> slow to make it, but if I don't make it, I get a good feel for what is going
> to happen if I give more gas. If I stall out the motor, then I shift into R,
> refire, and back down. I make a second attempt based upon the experience of
> the first, if the hill is too steep, I take the bypass. If the hill causes
> my Jeep to bounce, I take the bypass. If I simply bog down because I am
> going too slow, I hit it again with more gas, and walk right up.
#276
Guest
Posts: n/a
Re: This might not have been a good idea, but...
With each new passenger, I go through the routine of explaining
what the chicken bar is for, and when we then fall over, I'm screaming
at them to tuck their arms in, it works.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
CRWLR wrote:
>
> Obviously you didn't support the weight of your Jeep, but it was still
> moving when you put your feet out, and you could have found yourself trying
> to hold it up.
>
> Part of the fun and games is to balance your Jeep at just the right spot
> where it will hold itself up, but that you can rock it easily. Basically, I
> have put my CJ on the sweet spot several times, kind of like balancing a
> 'fridge on a hand truck. If the 'fridge is too far one way, it falls back
> onto its feet, too far the other way and you get crushed. The sweet spot is
> where the load is entirely on the wheels and you can rock the 'fridge back
> and forth in a narrow range. Getting your Jeep into this narroow range can
> be a delight, but because the range is quite narrow, you want to be sure you
> are fully inside the protective confines of the roll cage.
>
> NEVER EVER UNDER ANY CIRCUNSTANCE should you or anybody else put a arm or
> leg outside the vehicle in an attempt to keep it upright. This is a recipe
> for serious injury, maybe even a serious death.
>
> > I just caught it soon enough to be able to push it back to the
> > teeter-totter position. A friend of mine locally just told me via
> > email that he happens to have an extra full roll cage. I plan on
> > checking it out and if I get in the "uh oh, I'm about to roll"
> > position again I'll just sit back and enjoy the ride instead of trying
> > to Hulk-out of the situation.
> >
>
> Roll overs generally follow an episode of bouncing. If you are climbing a
> hill, and begin to bounce, then you are ripe for a roll over. Bouncing can
> result in broken Ujoints, which then results in a rapid decent backwards,
> which leads to a roll over. You should try to avoid bouncing, especially
> while hill climbing.
>
> I always hit the hill on my first approach in a manner that is probably too
> slow to make it, but if I don't make it, I get a good feel for what is going
> to happen if I give more gas. If I stall out the motor, then I shift into R,
> refire, and back down. I make a second attempt based upon the experience of
> the first, if the hill is too steep, I take the bypass. If the hill causes
> my Jeep to bounce, I take the bypass. If I simply bog down because I am
> going too slow, I hit it again with more gas, and walk right up.
what the chicken bar is for, and when we then fall over, I'm screaming
at them to tuck their arms in, it works.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
CRWLR wrote:
>
> Obviously you didn't support the weight of your Jeep, but it was still
> moving when you put your feet out, and you could have found yourself trying
> to hold it up.
>
> Part of the fun and games is to balance your Jeep at just the right spot
> where it will hold itself up, but that you can rock it easily. Basically, I
> have put my CJ on the sweet spot several times, kind of like balancing a
> 'fridge on a hand truck. If the 'fridge is too far one way, it falls back
> onto its feet, too far the other way and you get crushed. The sweet spot is
> where the load is entirely on the wheels and you can rock the 'fridge back
> and forth in a narrow range. Getting your Jeep into this narroow range can
> be a delight, but because the range is quite narrow, you want to be sure you
> are fully inside the protective confines of the roll cage.
>
> NEVER EVER UNDER ANY CIRCUNSTANCE should you or anybody else put a arm or
> leg outside the vehicle in an attempt to keep it upright. This is a recipe
> for serious injury, maybe even a serious death.
>
> > I just caught it soon enough to be able to push it back to the
> > teeter-totter position. A friend of mine locally just told me via
> > email that he happens to have an extra full roll cage. I plan on
> > checking it out and if I get in the "uh oh, I'm about to roll"
> > position again I'll just sit back and enjoy the ride instead of trying
> > to Hulk-out of the situation.
> >
>
> Roll overs generally follow an episode of bouncing. If you are climbing a
> hill, and begin to bounce, then you are ripe for a roll over. Bouncing can
> result in broken Ujoints, which then results in a rapid decent backwards,
> which leads to a roll over. You should try to avoid bouncing, especially
> while hill climbing.
>
> I always hit the hill on my first approach in a manner that is probably too
> slow to make it, but if I don't make it, I get a good feel for what is going
> to happen if I give more gas. If I stall out the motor, then I shift into R,
> refire, and back down. I make a second attempt based upon the experience of
> the first, if the hill is too steep, I take the bypass. If the hill causes
> my Jeep to bounce, I take the bypass. If I simply bog down because I am
> going too slow, I hit it again with more gas, and walk right up.
#277
Guest
Posts: n/a
Re: This might not have been a good idea, but...
With each new passenger, I go through the routine of explaining
what the chicken bar is for, and when we then fall over, I'm screaming
at them to tuck their arms in, it works.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
CRWLR wrote:
>
> Obviously you didn't support the weight of your Jeep, but it was still
> moving when you put your feet out, and you could have found yourself trying
> to hold it up.
>
> Part of the fun and games is to balance your Jeep at just the right spot
> where it will hold itself up, but that you can rock it easily. Basically, I
> have put my CJ on the sweet spot several times, kind of like balancing a
> 'fridge on a hand truck. If the 'fridge is too far one way, it falls back
> onto its feet, too far the other way and you get crushed. The sweet spot is
> where the load is entirely on the wheels and you can rock the 'fridge back
> and forth in a narrow range. Getting your Jeep into this narroow range can
> be a delight, but because the range is quite narrow, you want to be sure you
> are fully inside the protective confines of the roll cage.
>
> NEVER EVER UNDER ANY CIRCUNSTANCE should you or anybody else put a arm or
> leg outside the vehicle in an attempt to keep it upright. This is a recipe
> for serious injury, maybe even a serious death.
>
> > I just caught it soon enough to be able to push it back to the
> > teeter-totter position. A friend of mine locally just told me via
> > email that he happens to have an extra full roll cage. I plan on
> > checking it out and if I get in the "uh oh, I'm about to roll"
> > position again I'll just sit back and enjoy the ride instead of trying
> > to Hulk-out of the situation.
> >
>
> Roll overs generally follow an episode of bouncing. If you are climbing a
> hill, and begin to bounce, then you are ripe for a roll over. Bouncing can
> result in broken Ujoints, which then results in a rapid decent backwards,
> which leads to a roll over. You should try to avoid bouncing, especially
> while hill climbing.
>
> I always hit the hill on my first approach in a manner that is probably too
> slow to make it, but if I don't make it, I get a good feel for what is going
> to happen if I give more gas. If I stall out the motor, then I shift into R,
> refire, and back down. I make a second attempt based upon the experience of
> the first, if the hill is too steep, I take the bypass. If the hill causes
> my Jeep to bounce, I take the bypass. If I simply bog down because I am
> going too slow, I hit it again with more gas, and walk right up.
what the chicken bar is for, and when we then fall over, I'm screaming
at them to tuck their arms in, it works.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
CRWLR wrote:
>
> Obviously you didn't support the weight of your Jeep, but it was still
> moving when you put your feet out, and you could have found yourself trying
> to hold it up.
>
> Part of the fun and games is to balance your Jeep at just the right spot
> where it will hold itself up, but that you can rock it easily. Basically, I
> have put my CJ on the sweet spot several times, kind of like balancing a
> 'fridge on a hand truck. If the 'fridge is too far one way, it falls back
> onto its feet, too far the other way and you get crushed. The sweet spot is
> where the load is entirely on the wheels and you can rock the 'fridge back
> and forth in a narrow range. Getting your Jeep into this narroow range can
> be a delight, but because the range is quite narrow, you want to be sure you
> are fully inside the protective confines of the roll cage.
>
> NEVER EVER UNDER ANY CIRCUNSTANCE should you or anybody else put a arm or
> leg outside the vehicle in an attempt to keep it upright. This is a recipe
> for serious injury, maybe even a serious death.
>
> > I just caught it soon enough to be able to push it back to the
> > teeter-totter position. A friend of mine locally just told me via
> > email that he happens to have an extra full roll cage. I plan on
> > checking it out and if I get in the "uh oh, I'm about to roll"
> > position again I'll just sit back and enjoy the ride instead of trying
> > to Hulk-out of the situation.
> >
>
> Roll overs generally follow an episode of bouncing. If you are climbing a
> hill, and begin to bounce, then you are ripe for a roll over. Bouncing can
> result in broken Ujoints, which then results in a rapid decent backwards,
> which leads to a roll over. You should try to avoid bouncing, especially
> while hill climbing.
>
> I always hit the hill on my first approach in a manner that is probably too
> slow to make it, but if I don't make it, I get a good feel for what is going
> to happen if I give more gas. If I stall out the motor, then I shift into R,
> refire, and back down. I make a second attempt based upon the experience of
> the first, if the hill is too steep, I take the bypass. If the hill causes
> my Jeep to bounce, I take the bypass. If I simply bog down because I am
> going too slow, I hit it again with more gas, and walk right up.
#278
Guest
Posts: n/a
Re: This might not have been a good idea, but...
Just how often DO you roll, Bill?
L.W.(ßill) ------ III wrote:
> With each new passenger, I go through the routine of explaining
> what the chicken bar is for, and when we then fall over, I'm screaming
> at them to tuck their arms in, it works.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: probably from g. p. (abbreviation of general purpose)
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
L.W.(ßill) ------ III wrote:
> With each new passenger, I go through the routine of explaining
> what the chicken bar is for, and when we then fall over, I'm screaming
> at them to tuck their arms in, it works.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: probably from g. p. (abbreviation of general purpose)
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
#279
Guest
Posts: n/a
Re: This might not have been a good idea, but...
Just how often DO you roll, Bill?
L.W.(ßill) ------ III wrote:
> With each new passenger, I go through the routine of explaining
> what the chicken bar is for, and when we then fall over, I'm screaming
> at them to tuck their arms in, it works.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: probably from g. p. (abbreviation of general purpose)
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
L.W.(ßill) ------ III wrote:
> With each new passenger, I go through the routine of explaining
> what the chicken bar is for, and when we then fall over, I'm screaming
> at them to tuck their arms in, it works.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: probably from g. p. (abbreviation of general purpose)
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
#280
Guest
Posts: n/a
Re: This might not have been a good idea, but...
Just how often DO you roll, Bill?
L.W.(ßill) ------ III wrote:
> With each new passenger, I go through the routine of explaining
> what the chicken bar is for, and when we then fall over, I'm screaming
> at them to tuck their arms in, it works.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: probably from g. p. (abbreviation of general purpose)
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
L.W.(ßill) ------ III wrote:
> With each new passenger, I go through the routine of explaining
> what the chicken bar is for, and when we then fall over, I'm screaming
> at them to tuck their arms in, it works.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: probably from g. p. (abbreviation of general purpose)
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________