Maint Reqrd light
Guest
Posts: n/a
Re: Maint Reqrd light
Not on a 93. It's part of the engine computer.
In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>The timer module is under the dash on the right side of the steering
>column under the cruise module if you have one. It can be unplugged.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>Rich wrote:
>>
>> Ive got a 93 YJ wrangler and the Maint Required light is on.
>> Ive been told its because of the O2 sensor but its been changed and
>> the computer has not been reset. I have a printout of the diag. codes
>> and did the on, off, on, off, on thing with the ingnition and it gave
>> no significant codes, so I know all is fine. How do you get the light
>> to go out??
>> Ive disconnected the battery (for a long time, over night), I
>> even took it to the local jeep dealer and they wanted to charge me
>> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>> clear it, I know that might take 5 min. and thats if they have a
>> problem.
>> Any Ideas???
>>
>> Thanks,
>> Rich
In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>The timer module is under the dash on the right side of the steering
>column under the cruise module if you have one. It can be unplugged.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>Rich wrote:
>>
>> Ive got a 93 YJ wrangler and the Maint Required light is on.
>> Ive been told its because of the O2 sensor but its been changed and
>> the computer has not been reset. I have a printout of the diag. codes
>> and did the on, off, on, off, on thing with the ingnition and it gave
>> no significant codes, so I know all is fine. How do you get the light
>> to go out??
>> Ive disconnected the battery (for a long time, over night), I
>> even took it to the local jeep dealer and they wanted to charge me
>> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>> clear it, I know that might take 5 min. and thats if they have a
>> problem.
>> Any Ideas???
>>
>> Thanks,
>> Rich
Guest
Posts: n/a
Re: Maint Reqrd light
And then some people wonder why I like the old stuff...
So Chrysler decided you 'had' to spend money one way or the other eh.
Mike
bllsht wrote:
>
> Not on a 93. It's part of the engine computer.
>
> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
So Chrysler decided you 'had' to spend money one way or the other eh.
Mike
bllsht wrote:
>
> Not on a 93. It's part of the engine computer.
>
> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
Guest
Posts: n/a
Re: Maint Reqrd light
And then some people wonder why I like the old stuff...
So Chrysler decided you 'had' to spend money one way or the other eh.
Mike
bllsht wrote:
>
> Not on a 93. It's part of the engine computer.
>
> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
So Chrysler decided you 'had' to spend money one way or the other eh.
Mike
bllsht wrote:
>
> Not on a 93. It's part of the engine computer.
>
> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
Guest
Posts: n/a
Re: Maint Reqrd light
And then some people wonder why I like the old stuff...
So Chrysler decided you 'had' to spend money one way or the other eh.
Mike
bllsht wrote:
>
> Not on a 93. It's part of the engine computer.
>
> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
So Chrysler decided you 'had' to spend money one way or the other eh.
Mike
bllsht wrote:
>
> Not on a 93. It's part of the engine computer.
>
> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
Guest
Posts: n/a
Re: Maint Reqrd light
And then some people wonder why I like the old stuff...
So Chrysler decided you 'had' to spend money one way or the other eh.
Mike
bllsht wrote:
>
> Not on a 93. It's part of the engine computer.
>
> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
So Chrysler decided you 'had' to spend money one way or the other eh.
Mike
bllsht wrote:
>
> Not on a 93. It's part of the engine computer.
>
> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
Guest
Posts: n/a
Re: Maint Reqrd light
If you have the module, yes.
Someone who isn't particularly good with answers says you don't have
one, that it is part of the computer now.
Mike
Rich wrote:
>
> Will unplugging the timer module make the light go out???
>
> Rich
>
> On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
Someone who isn't particularly good with answers says you don't have
one, that it is part of the computer now.
Mike
Rich wrote:
>
> Will unplugging the timer module make the light go out???
>
> Rich
>
> On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
Guest
Posts: n/a
Re: Maint Reqrd light
If you have the module, yes.
Someone who isn't particularly good with answers says you don't have
one, that it is part of the computer now.
Mike
Rich wrote:
>
> Will unplugging the timer module make the light go out???
>
> Rich
>
> On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
Someone who isn't particularly good with answers says you don't have
one, that it is part of the computer now.
Mike
Rich wrote:
>
> Will unplugging the timer module make the light go out???
>
> Rich
>
> On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
Guest
Posts: n/a
Re: Maint Reqrd light
If you have the module, yes.
Someone who isn't particularly good with answers says you don't have
one, that it is part of the computer now.
Mike
Rich wrote:
>
> Will unplugging the timer module make the light go out???
>
> Rich
>
> On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
Someone who isn't particularly good with answers says you don't have
one, that it is part of the computer now.
Mike
Rich wrote:
>
> Will unplugging the timer module make the light go out???
>
> Rich
>
> On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
Guest
Posts: n/a
Re: Maint Reqrd light
If you have the module, yes.
Someone who isn't particularly good with answers says you don't have
one, that it is part of the computer now.
Mike
Rich wrote:
>
> Will unplugging the timer module make the light go out???
>
> Rich
>
> On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
Someone who isn't particularly good with answers says you don't have
one, that it is part of the computer now.
Mike
Rich wrote:
>
> Will unplugging the timer module make the light go out???
>
> Rich
>
> On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich
Guest
Posts: n/a
Re: Maint Reqrd light
Aw, it ain't that bad. Throwing the bulb away is free.
In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
>And then some people wonder why I like the old stuff...
>
>So Chrysler decided you 'had' to spend money one way or the other eh.
>
>Mike
>
>bllsht wrote:
>>
>> Not on a 93. It's part of the engine computer.
>>
>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>>
>> >The timer module is under the dash on the right side of the steering
>> >column under the cruise module if you have one. It can be unplugged.
>> >
>> >Mike
>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> >88 Cherokee 235 BFG AT's
>> >
>> >Rich wrote:
>> >>
>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
>> >> Ive been told its because of the O2 sensor but its been changed and
>> >> the computer has not been reset. I have a printout of the diag. codes
>> >> and did the on, off, on, off, on thing with the ingnition and it gave
>> >> no significant codes, so I know all is fine. How do you get the light
>> >> to go out??
>> >> Ive disconnected the battery (for a long time, over night), I
>> >> even took it to the local jeep dealer and they wanted to charge me
>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>> >> clear it, I know that might take 5 min. and thats if they have a
>> >> problem.
>> >> Any Ideas???
>> >>
>> >> Thanks,
>> >> Rich
In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
>And then some people wonder why I like the old stuff...
>
>So Chrysler decided you 'had' to spend money one way or the other eh.
>
>Mike
>
>bllsht wrote:
>>
>> Not on a 93. It's part of the engine computer.
>>
>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>>
>> >The timer module is under the dash on the right side of the steering
>> >column under the cruise module if you have one. It can be unplugged.
>> >
>> >Mike
>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> >88 Cherokee 235 BFG AT's
>> >
>> >Rich wrote:
>> >>
>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
>> >> Ive been told its because of the O2 sensor but its been changed and
>> >> the computer has not been reset. I have a printout of the diag. codes
>> >> and did the on, off, on, off, on thing with the ingnition and it gave
>> >> no significant codes, so I know all is fine. How do you get the light
>> >> to go out??
>> >> Ive disconnected the battery (for a long time, over night), I
>> >> even took it to the local jeep dealer and they wanted to charge me
>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>> >> clear it, I know that might take 5 min. and thats if they have a
>> >> problem.
>> >> Any Ideas???
>> >>
>> >> Thanks,
>> >> Rich
