Re: Maint Reqrd light
 

Will unplugging the timer module make the light go out???

Rich

On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
wrote:

>The timer module is under the dash on the right side of the steering
>column under the cruise module if you have one. It can be unplugged.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>Rich wrote:
>>
>> Ive got a 93 YJ wrangler and the Maint Required light is on.
>> Ive been told its because of the O2 sensor but its been changed and
>> the computer has not been reset. I have a printout of the diag. codes
>> and did the on, off, on, off, on thing with the ingnition and it gave
>> no significant codes, so I know all is fine. How do you get the light
>> to go out??
>> Ive disconnected the battery (for a long time, over night), I
>> even took it to the local jeep dealer and they wanted to charge me
>> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>> clear it, I know that might take 5 min. and thats if they have a
>> problem.
>> Any Ideas???
>>
>> Thanks,
>> Rich

Re: Maint Reqrd light
 

Will unplugging the timer module make the light go out???

Rich

On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
wrote:

>The timer module is under the dash on the right side of the steering
>column under the cruise module if you have one. It can be unplugged.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>Rich wrote:
>>
>> Ive got a 93 YJ wrangler and the Maint Required light is on.
>> Ive been told its because of the O2 sensor but its been changed and
>> the computer has not been reset. I have a printout of the diag. codes
>> and did the on, off, on, off, on thing with the ingnition and it gave
>> no significant codes, so I know all is fine. How do you get the light
>> to go out??
>> Ive disconnected the battery (for a long time, over night), I
>> even took it to the local jeep dealer and they wanted to charge me
>> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>> clear it, I know that might take 5 min. and thats if they have a
>> problem.
>> Any Ideas???
>>
>> Thanks,
>> Rich

Re: Maint Reqrd light
 

Will unplugging the timer module make the light go out???

Rich

On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
wrote:

>The timer module is under the dash on the right side of the steering
>column under the cruise module if you have one. It can be unplugged.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>Rich wrote:
>>
>> Ive got a 93 YJ wrangler and the Maint Required light is on.
>> Ive been told its because of the O2 sensor but its been changed and
>> the computer has not been reset. I have a printout of the diag. codes
>> and did the on, off, on, off, on thing with the ingnition and it gave
>> no significant codes, so I know all is fine. How do you get the light
>> to go out??
>> Ive disconnected the battery (for a long time, over night), I
>> even took it to the local jeep dealer and they wanted to charge me
>> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>> clear it, I know that might take 5 min. and thats if they have a
>> problem.
>> Any Ideas???
>>
>> Thanks,
>> Rich

Re: Maint Reqrd light
 

Yes.

Mike

Rich wrote:
>
> Will unplugging the timer module make the light go out???
>
> Rich
>
> On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich

Re: Maint Reqrd light
 

Yes.

Mike

Rich wrote:
>
> Will unplugging the timer module make the light go out???
>
> Rich
>
> On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich

Re: Maint Reqrd light
 

Yes.

Mike

Rich wrote:
>
> Will unplugging the timer module make the light go out???
>
> Rich
>
> On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich

Re: Maint Reqrd light
 

Yes.

Mike

Rich wrote:
>
> Will unplugging the timer module make the light go out???
>
> Rich
>
> On Thu, 27 May 2004 09:10:49 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >The timer module is under the dash on the right side of the steering
> >column under the cruise module if you have one. It can be unplugged.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >Rich wrote:
> >>
> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >> Ive been told its because of the O2 sensor but its been changed and
> >> the computer has not been reset. I have a printout of the diag. codes
> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >> no significant codes, so I know all is fine. How do you get the light
> >> to go out??
> >> Ive disconnected the battery (for a long time, over night), I
> >> even took it to the local jeep dealer and they wanted to charge me
> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >> clear it, I know that might take 5 min. and thats if they have a
> >> problem.
> >> Any Ideas???
> >>
> >> Thanks,
> >> Rich

Re: Maint Reqrd light
 

Not on a 93. It's part of the engine computer.


In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:

>The timer module is under the dash on the right side of the steering
>column under the cruise module if you have one. It can be unplugged.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>Rich wrote:
>>
>> Ive got a 93 YJ wrangler and the Maint Required light is on.
>> Ive been told its because of the O2 sensor but its been changed and
>> the computer has not been reset. I have a printout of the diag. codes
>> and did the on, off, on, off, on thing with the ingnition and it gave
>> no significant codes, so I know all is fine. How do you get the light
>> to go out??
>> Ive disconnected the battery (for a long time, over night), I
>> even took it to the local jeep dealer and they wanted to charge me
>> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>> clear it, I know that might take 5 min. and thats if they have a
>> problem.
>> Any Ideas???
>>
>> Thanks,
>> Rich

Re: Maint Reqrd light
 

Not on a 93. It's part of the engine computer.


In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:

>The timer module is under the dash on the right side of the steering
>column under the cruise module if you have one. It can be unplugged.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>Rich wrote:
>>
>> Ive got a 93 YJ wrangler and the Maint Required light is on.
>> Ive been told its because of the O2 sensor but its been changed and
>> the computer has not been reset. I have a printout of the diag. codes
>> and did the on, off, on, off, on thing with the ingnition and it gave
>> no significant codes, so I know all is fine. How do you get the light
>> to go out??
>> Ive disconnected the battery (for a long time, over night), I
>> even took it to the local jeep dealer and they wanted to charge me
>> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>> clear it, I know that might take 5 min. and thats if they have a
>> problem.
>> Any Ideas???
>>
>> Thanks,
>> Rich

Re: Maint Reqrd light
 

Not on a 93. It's part of the engine computer.


In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:

>The timer module is under the dash on the right side of the steering
>column under the cruise module if you have one. It can be unplugged.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>Rich wrote:
>>
>> Ive got a 93 YJ wrangler and the Maint Required light is on.
>> Ive been told its because of the O2 sensor but its been changed and
>> the computer has not been reset. I have a printout of the diag. codes
>> and did the on, off, on, off, on thing with the ingnition and it gave
>> no significant codes, so I know all is fine. How do you get the light
>> to go out??
>> Ive disconnected the battery (for a long time, over night), I
>> even took it to the local jeep dealer and they wanted to charge me
>> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>> clear it, I know that might take 5 min. and thats if they have a
>> problem.
>> Any Ideas???
>>
>> Thanks,
>> Rich