Lockers
03-23-2007, 11:07 PM
#81
Guest
Posts: n/a
Re: Lockers
Good to know, thanks,
Carl
"Bob" <robertworr@bellsouth.net> wrote in message
news:vn0Nh.13180$_a1.6050@bignews7.bellsouth.net.. .
> Get ready to grind. Ausi are not a direct fit. You will have to gring the
> carrier to fit.
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:bcCdndsusNhLM53bnZ2dnUVZ_uuqnZ2d@comcast.com. ..
>> Let us know how you like 'em, I'm looking at an Aussie when I get ready
>> to lock my D30.
>>
>> Carl
>>
>>
>> "jerryg" <Gregginn7@msn.com> wrote in message
>> news:1174449663.403952.218570@p15g2000hsd.googlegr oups.com...
>>> On Mar 20, 10:58 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>> Actually, it looks like the standard axle was a '213MM Rear' (probably
>>>> a
>>>> corp. axle) and the D44 is a upgrade.
>>>>
>>>> Carl
>>>>
>>>> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>>>>
>>>>
>>>>
>>>> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>> >> Too bad they don't offer one for the 8.25.
>>>>
>>>> >> Carl
>>>>
>>>> >> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>>>>
>>>> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>>>> >> > wrote:
>>>> >> >> Wow. Where have you found that price?
>>>>
>>>> >> >> Carl
>>>>
>>>> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>>>>
>>>> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>>>> >> >> > wrote:
>>>> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess.
>>>> >> >> >> I
>>>> >> >> >> have
>>>> >> >> >> heard
>>>> >> >> >> good things about the Lockright, but nothing about the aussie
>>>> >> >> >> locker.
>>>>
>>>> >> >> >> Carl
>>>>
>>>> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>>>>
>>>> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
>>>> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>>>>
>>>> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
>>>> >> >> >> >> > <billhug...@***.net>
>>>> >> >> >> >> > wrote:
>>>>
>>>> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as
>>>> >> >> >> >> > > they
>>>> >> >> >> >> > > were
>>>> >> >> >> >> > > going
>>>> >> >> >> >> > > under, Like Mike Romain's
>>>> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
>>>> >> >> >> >> > > 20's cover will be exactly
>>>> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
>>>> >> >> >> >> > > God Bless America, Bill 0|||||||0
>>>> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>>>>
>>>> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >> >> >> >> > > > I'm going to look at it now, you may be right. I
>>>> >> >> >> >> > > > don't
>>>> >> >> >> >> > > > know.
>>>> >> >> >> >> > > > Chrysler
>>>> >> >> >> >> > > > 8.25?
>>>>
>>>> >> >> >> >> > > > Greg
>>>>
>>>> >> >> >> >> > > --
>>>> >> >> >> >> > > Posted via a free Usenet account
>>>> >> >> >> >> > > fromhttp://www.teranews.com
>>>>
>>>> >> >> >> >> > Its a D35
>>>>
>>>> >> >> >> >> > Greg
>>>>
>>>> >> >> >> >> Its the same as my yj
>>>>
>>>> >> >> >> >> Greg- Hide quoted text -
>>>>
>>>> >> >> >> >> - Show quoted text -
>>>>
>>>> >> >> >> > I know in my prior post I said it was not the same as my yj,
>>>> >> >> >> > but
>>>> >> >> >> > I
>>>> >> >> >> > took a closer look, and it is. D30 up front. I also own a
>>>> >> >> >> > 2006 GC
>>>> >> >> >> > limited, 4.7 litre. What axle would that have?
>>>>
>>>> >> >> >> > Greg- Hide quoted text -
>>>>
>>>> >> >> >> - Show quoted text -
>>>>
>>>> >> >> > I want to go as cheap as possible. It is just light off roading
>>>> >> >> > I
>>>> >> >> > do.
>>>> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>>>>
>>>> >> >> > Greg- Hide quoted text -
>>>>
>>>> >> >> - Show quoted text -
>>>>
>>>> >> > D35 and D30 229.00 each
>>>>
>>>> >> > Greg- Hide quoted text -
>>>>
>>>> >> - Show quoted text -
>>>>
>>>> > I can't find info on 06 GC rear end.
>>>>
>>>> > Greg- Hide quoted text -
>>>>
>>>> - Show quoted text -
>>>
>>> Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
>>> 86.
>>>
>>> Greg
>>>
>>
>>
>
>
Carl
"Bob" <robertworr@bellsouth.net> wrote in message
news:vn0Nh.13180$_a1.6050@bignews7.bellsouth.net.. .
> Get ready to grind. Ausi are not a direct fit. You will have to gring the
> carrier to fit.
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:bcCdndsusNhLM53bnZ2dnUVZ_uuqnZ2d@comcast.com. ..
>> Let us know how you like 'em, I'm looking at an Aussie when I get ready
>> to lock my D30.
>>
>> Carl
>>
>>
>> "jerryg" <Gregginn7@msn.com> wrote in message
>> news:1174449663.403952.218570@p15g2000hsd.googlegr oups.com...
>>> On Mar 20, 10:58 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>> Actually, it looks like the standard axle was a '213MM Rear' (probably
>>>> a
>>>> corp. axle) and the D44 is a upgrade.
>>>>
>>>> Carl
>>>>
>>>> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>>>>
>>>>
>>>>
>>>> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>> >> Too bad they don't offer one for the 8.25.
>>>>
>>>> >> Carl
>>>>
>>>> >> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>>>>
>>>> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>>>> >> > wrote:
>>>> >> >> Wow. Where have you found that price?
>>>>
>>>> >> >> Carl
>>>>
>>>> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>>>>
>>>> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>>>> >> >> > wrote:
>>>> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess.
>>>> >> >> >> I
>>>> >> >> >> have
>>>> >> >> >> heard
>>>> >> >> >> good things about the Lockright, but nothing about the aussie
>>>> >> >> >> locker.
>>>>
>>>> >> >> >> Carl
>>>>
>>>> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>>>>
>>>> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
>>>> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>>>>
>>>> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
>>>> >> >> >> >> > <billhug...@***.net>
>>>> >> >> >> >> > wrote:
>>>>
>>>> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as
>>>> >> >> >> >> > > they
>>>> >> >> >> >> > > were
>>>> >> >> >> >> > > going
>>>> >> >> >> >> > > under, Like Mike Romain's
>>>> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
>>>> >> >> >> >> > > 20's cover will be exactly
>>>> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
>>>> >> >> >> >> > > God Bless America, Bill 0|||||||0
>>>> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>>>>
>>>> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >> >> >> >> > > > I'm going to look at it now, you may be right. I
>>>> >> >> >> >> > > > don't
>>>> >> >> >> >> > > > know.
>>>> >> >> >> >> > > > Chrysler
>>>> >> >> >> >> > > > 8.25?
>>>>
>>>> >> >> >> >> > > > Greg
>>>>
>>>> >> >> >> >> > > --
>>>> >> >> >> >> > > Posted via a free Usenet account
>>>> >> >> >> >> > > fromhttp://www.teranews.com
>>>>
>>>> >> >> >> >> > Its a D35
>>>>
>>>> >> >> >> >> > Greg
>>>>
>>>> >> >> >> >> Its the same as my yj
>>>>
>>>> >> >> >> >> Greg- Hide quoted text -
>>>>
>>>> >> >> >> >> - Show quoted text -
>>>>
>>>> >> >> >> > I know in my prior post I said it was not the same as my yj,
>>>> >> >> >> > but
>>>> >> >> >> > I
>>>> >> >> >> > took a closer look, and it is. D30 up front. I also own a
>>>> >> >> >> > 2006 GC
>>>> >> >> >> > limited, 4.7 litre. What axle would that have?
>>>>
>>>> >> >> >> > Greg- Hide quoted text -
>>>>
>>>> >> >> >> - Show quoted text -
>>>>
>>>> >> >> > I want to go as cheap as possible. It is just light off roading
>>>> >> >> > I
>>>> >> >> > do.
>>>> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>>>>
>>>> >> >> > Greg- Hide quoted text -
>>>>
>>>> >> >> - Show quoted text -
>>>>
>>>> >> > D35 and D30 229.00 each
>>>>
>>>> >> > Greg- Hide quoted text -
>>>>
>>>> >> - Show quoted text -
>>>>
>>>> > I can't find info on 06 GC rear end.
>>>>
>>>> > Greg- Hide quoted text -
>>>>
>>>> - Show quoted text -
>>>
>>> Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
>>> 86.
>>>
>>> Greg
>>>
>>
>>
>
>
03-23-2007, 11:07 PM
#82
Guest
Posts: n/a
Re: Lockers
Good to know, thanks,
Carl
"Bob" <robertworr@bellsouth.net> wrote in message
news:vn0Nh.13180$_a1.6050@bignews7.bellsouth.net.. .
> Get ready to grind. Ausi are not a direct fit. You will have to gring the
> carrier to fit.
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:bcCdndsusNhLM53bnZ2dnUVZ_uuqnZ2d@comcast.com. ..
>> Let us know how you like 'em, I'm looking at an Aussie when I get ready
>> to lock my D30.
>>
>> Carl
>>
>>
>> "jerryg" <Gregginn7@msn.com> wrote in message
>> news:1174449663.403952.218570@p15g2000hsd.googlegr oups.com...
>>> On Mar 20, 10:58 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>> Actually, it looks like the standard axle was a '213MM Rear' (probably
>>>> a
>>>> corp. axle) and the D44 is a upgrade.
>>>>
>>>> Carl
>>>>
>>>> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>>>>
>>>>
>>>>
>>>> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>> >> Too bad they don't offer one for the 8.25.
>>>>
>>>> >> Carl
>>>>
>>>> >> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>>>>
>>>> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>>>> >> > wrote:
>>>> >> >> Wow. Where have you found that price?
>>>>
>>>> >> >> Carl
>>>>
>>>> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>>>>
>>>> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>>>> >> >> > wrote:
>>>> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess.
>>>> >> >> >> I
>>>> >> >> >> have
>>>> >> >> >> heard
>>>> >> >> >> good things about the Lockright, but nothing about the aussie
>>>> >> >> >> locker.
>>>>
>>>> >> >> >> Carl
>>>>
>>>> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>>>>
>>>> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
>>>> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>>>>
>>>> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
>>>> >> >> >> >> > <billhug...@***.net>
>>>> >> >> >> >> > wrote:
>>>>
>>>> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as
>>>> >> >> >> >> > > they
>>>> >> >> >> >> > > were
>>>> >> >> >> >> > > going
>>>> >> >> >> >> > > under, Like Mike Romain's
>>>> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
>>>> >> >> >> >> > > 20's cover will be exactly
>>>> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
>>>> >> >> >> >> > > God Bless America, Bill 0|||||||0
>>>> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>>>>
>>>> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >> >> >> >> > > > I'm going to look at it now, you may be right. I
>>>> >> >> >> >> > > > don't
>>>> >> >> >> >> > > > know.
>>>> >> >> >> >> > > > Chrysler
>>>> >> >> >> >> > > > 8.25?
>>>>
>>>> >> >> >> >> > > > Greg
>>>>
>>>> >> >> >> >> > > --
>>>> >> >> >> >> > > Posted via a free Usenet account
>>>> >> >> >> >> > > fromhttp://www.teranews.com
>>>>
>>>> >> >> >> >> > Its a D35
>>>>
>>>> >> >> >> >> > Greg
>>>>
>>>> >> >> >> >> Its the same as my yj
>>>>
>>>> >> >> >> >> Greg- Hide quoted text -
>>>>
>>>> >> >> >> >> - Show quoted text -
>>>>
>>>> >> >> >> > I know in my prior post I said it was not the same as my yj,
>>>> >> >> >> > but
>>>> >> >> >> > I
>>>> >> >> >> > took a closer look, and it is. D30 up front. I also own a
>>>> >> >> >> > 2006 GC
>>>> >> >> >> > limited, 4.7 litre. What axle would that have?
>>>>
>>>> >> >> >> > Greg- Hide quoted text -
>>>>
>>>> >> >> >> - Show quoted text -
>>>>
>>>> >> >> > I want to go as cheap as possible. It is just light off roading
>>>> >> >> > I
>>>> >> >> > do.
>>>> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>>>>
>>>> >> >> > Greg- Hide quoted text -
>>>>
>>>> >> >> - Show quoted text -
>>>>
>>>> >> > D35 and D30 229.00 each
>>>>
>>>> >> > Greg- Hide quoted text -
>>>>
>>>> >> - Show quoted text -
>>>>
>>>> > I can't find info on 06 GC rear end.
>>>>
>>>> > Greg- Hide quoted text -
>>>>
>>>> - Show quoted text -
>>>
>>> Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
>>> 86.
>>>
>>> Greg
>>>
>>
>>
>
>
Carl
"Bob" <robertworr@bellsouth.net> wrote in message
news:vn0Nh.13180$_a1.6050@bignews7.bellsouth.net.. .
> Get ready to grind. Ausi are not a direct fit. You will have to gring the
> carrier to fit.
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:bcCdndsusNhLM53bnZ2dnUVZ_uuqnZ2d@comcast.com. ..
>> Let us know how you like 'em, I'm looking at an Aussie when I get ready
>> to lock my D30.
>>
>> Carl
>>
>>
>> "jerryg" <Gregginn7@msn.com> wrote in message
>> news:1174449663.403952.218570@p15g2000hsd.googlegr oups.com...
>>> On Mar 20, 10:58 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>> Actually, it looks like the standard axle was a '213MM Rear' (probably
>>>> a
>>>> corp. axle) and the D44 is a upgrade.
>>>>
>>>> Carl
>>>>
>>>> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>>>>
>>>>
>>>>
>>>> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>>> >> Too bad they don't offer one for the 8.25.
>>>>
>>>> >> Carl
>>>>
>>>> >> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>>>>
>>>> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>>>> >> > wrote:
>>>> >> >> Wow. Where have you found that price?
>>>>
>>>> >> >> Carl
>>>>
>>>> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>>>>
>>>> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>>>> >> >> > wrote:
>>>> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess.
>>>> >> >> >> I
>>>> >> >> >> have
>>>> >> >> >> heard
>>>> >> >> >> good things about the Lockright, but nothing about the aussie
>>>> >> >> >> locker.
>>>>
>>>> >> >> >> Carl
>>>>
>>>> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>>>>
>>>> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
>>>> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>>>>
>>>> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
>>>> >> >> >> >> > <billhug...@***.net>
>>>> >> >> >> >> > wrote:
>>>>
>>>> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as
>>>> >> >> >> >> > > they
>>>> >> >> >> >> > > were
>>>> >> >> >> >> > > going
>>>> >> >> >> >> > > under, Like Mike Romain's
>>>> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
>>>> >> >> >> >> > > 20's cover will be exactly
>>>> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
>>>> >> >> >> >> > > God Bless America, Bill 0|||||||0
>>>> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>>>>
>>>> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>>>>
>>>> >> >> >> >> > > > I'm going to look at it now, you may be right. I
>>>> >> >> >> >> > > > don't
>>>> >> >> >> >> > > > know.
>>>> >> >> >> >> > > > Chrysler
>>>> >> >> >> >> > > > 8.25?
>>>>
>>>> >> >> >> >> > > > Greg
>>>>
>>>> >> >> >> >> > > --
>>>> >> >> >> >> > > Posted via a free Usenet account
>>>> >> >> >> >> > > fromhttp://www.teranews.com
>>>>
>>>> >> >> >> >> > Its a D35
>>>>
>>>> >> >> >> >> > Greg
>>>>
>>>> >> >> >> >> Its the same as my yj
>>>>
>>>> >> >> >> >> Greg- Hide quoted text -
>>>>
>>>> >> >> >> >> - Show quoted text -
>>>>
>>>> >> >> >> > I know in my prior post I said it was not the same as my yj,
>>>> >> >> >> > but
>>>> >> >> >> > I
>>>> >> >> >> > took a closer look, and it is. D30 up front. I also own a
>>>> >> >> >> > 2006 GC
>>>> >> >> >> > limited, 4.7 litre. What axle would that have?
>>>>
>>>> >> >> >> > Greg- Hide quoted text -
>>>>
>>>> >> >> >> - Show quoted text -
>>>>
>>>> >> >> > I want to go as cheap as possible. It is just light off roading
>>>> >> >> > I
>>>> >> >> > do.
>>>> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>>>>
>>>> >> >> > Greg- Hide quoted text -
>>>>
>>>> >> >> - Show quoted text -
>>>>
>>>> >> > D35 and D30 229.00 each
>>>>
>>>> >> > Greg- Hide quoted text -
>>>>
>>>> >> - Show quoted text -
>>>>
>>>> > I can't find info on 06 GC rear end.
>>>>
>>>> > Greg- Hide quoted text -
>>>>
>>>> - Show quoted text -
>>>
>>> Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
>>> 86.
>>>
>>> Greg
>>>
>>
>>
>
>
03-24-2007, 01:01 PM
#83
Guest
Posts: n/a
Re: Lockers
>> Get ready to grind. Ausi are not a direct fit. You will have to gring the
>> carrier to fit.
I did on my dana 44s. It took a whole 3 minutes to make a 3/16 notch with a
die grinder, but then I needed to wash them clean anyway and install all the
new bearings and R+P.
You should probably get new pins, cheap at Reider racing. I havent driven it
yet
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
>> carrier to fit.
I did on my dana 44s. It took a whole 3 minutes to make a 3/16 notch with a
die grinder, but then I needed to wash them clean anyway and install all the
new bearings and R+P.
You should probably get new pins, cheap at Reider racing. I havent driven it
yet
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
03-24-2007, 01:01 PM
#84
Guest
Posts: n/a
Re: Lockers
>> Get ready to grind. Ausi are not a direct fit. You will have to gring the
>> carrier to fit.
I did on my dana 44s. It took a whole 3 minutes to make a 3/16 notch with a
die grinder, but then I needed to wash them clean anyway and install all the
new bearings and R+P.
You should probably get new pins, cheap at Reider racing. I havent driven it
yet
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
>> carrier to fit.
I did on my dana 44s. It took a whole 3 minutes to make a 3/16 notch with a
die grinder, but then I needed to wash them clean anyway and install all the
new bearings and R+P.
You should probably get new pins, cheap at Reider racing. I havent driven it
yet
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
03-24-2007, 01:01 PM
#85
Guest
Posts: n/a
Re: Lockers
>> Get ready to grind. Ausi are not a direct fit. You will have to gring the
>> carrier to fit.
I did on my dana 44s. It took a whole 3 minutes to make a 3/16 notch with a
die grinder, but then I needed to wash them clean anyway and install all the
new bearings and R+P.
You should probably get new pins, cheap at Reider racing. I havent driven it
yet
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
>> carrier to fit.
I did on my dana 44s. It took a whole 3 minutes to make a 3/16 notch with a
die grinder, but then I needed to wash them clean anyway and install all the
new bearings and R+P.
You should probably get new pins, cheap at Reider racing. I havent driven it
yet
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)