Lockers
#61
Guest
Posts: n/a
Re: Lockers
Searched google for 'WK' and 'rear axle'
Carl
"jerryg" <Gregginn7@msn.com> wrote in message
news:1174449520.626547.9000@e1g2000hsg.googlegroup s.com...
> On Mar 20, 10:57 pm, "jerryg" <Greggi...@msn.com> wrote:
>> On Mar 20, 10:56 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>
>>
>>
>>
>>
>> > It looks like it's the aluminum dana 44 to me.
>>
>> > Carl
>>
>> > "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >news:1174449183.226316.203400@p15g2000hsd.googleg roups.com...
>>
>> > > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> > >> Too bad they don't offer one for the 8.25.
>>
>> > >> Carl
>>
>> > >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> > >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>>
>> > >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>> > >> > wrote:
>> > >> >> Wow. Where have you found that price?
>>
>> > >> >> Carl
>>
>> > >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> > >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>>
>> > >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>> > >> >> > wrote:
>> > >> >> >> 06 GC probably has the aluminum D44, but that's just a guess.
>> > >> >> >> I
>> > >> >> >> have
>> > >> >> >> heard
>> > >> >> >> good things about the Lockright, but nothing about the aussie
>> > >> >> >> locker.
>>
>> > >> >> >> Carl
>>
>> > >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> > >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>>
>> > >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
>> > >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>>
>> > >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
>> > >> >> >> >> > <billhug...@***.net>
>> > >> >> >> >> > wrote:
>>
>> > >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as
>> > >> >> >> >> > > they
>> > >> >> >> >> > > were
>> > >> >> >> >> > > going
>> > >> >> >> >> > > under, Like Mike Romain's
>> > >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
>> > >> >> >> >> > > 20's cover will be exactly
>> > >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
>> > >> >> >> >> > > God Bless America, Bill 0|||||||0
>> > >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> > >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>>
>> > >> >> >> >> > > > I'm going to look at it now, you may be right. I
>> > >> >> >> >> > > > don't
>> > >> >> >> >> > > > know.
>> > >> >> >> >> > > > Chrysler
>> > >> >> >> >> > > > 8.25?
>>
>> > >> >> >> >> > > > Greg
>>
>> > >> >> >> >> > > --
>> > >> >> >> >> > > Posted via a free Usenet account
>> > >> >> >> >> > > fromhttp://www.teranews.com
>>
>> > >> >> >> >> > Its a D35
>>
>> > >> >> >> >> > Greg
>>
>> > >> >> >> >> Its the same as my yj
>>
>> > >> >> >> >> Greg- Hide quoted text -
>>
>> > >> >> >> >> - Show quoted text -
>>
>> > >> >> >> > I know in my prior post I said it was not the same as my yj,
>> > >> >> >> > but
>> > >> >> >> > I
>> > >> >> >> > took a closer look, and it is. D30 up front. I also own a
>> > >> >> >> > 2006 GC
>> > >> >> >> > limited, 4.7 litre. What axle would that have?
>>
>> > >> >> >> > Greg- Hide quoted text -
>>
>> > >> >> >> - Show quoted text -
>>
>> > >> >> > I want to go as cheap as possible. It is just light off roading
>> > >> >> > I
>> > >> >> > do.
>> > >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>>
>> > >> >> > Greg- Hide quoted text -
>>
>> > >> >> - Show quoted text -
>>
>> > >> > D35 and D30 229.00 each
>>
>> > >> > Greg- Hide quoted text -
>>
>> > >> - Show quoted text -
>>
>> > > I can't find info on 06 GC rear end.
>>
>> > > Greg- Hide quoted text -
>>
>> > - Show quoted text -
>>
>> Were are you looking?
>>
>> Greg- Hide quoted text -
>>
>> - Show quoted text -
>
> Where**
>
Carl
"jerryg" <Gregginn7@msn.com> wrote in message
news:1174449520.626547.9000@e1g2000hsg.googlegroup s.com...
> On Mar 20, 10:57 pm, "jerryg" <Greggi...@msn.com> wrote:
>> On Mar 20, 10:56 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>>
>>
>>
>>
>>
>> > It looks like it's the aluminum dana 44 to me.
>>
>> > Carl
>>
>> > "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >news:1174449183.226316.203400@p15g2000hsd.googleg roups.com...
>>
>> > > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> > >> Too bad they don't offer one for the 8.25.
>>
>> > >> Carl
>>
>> > >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> > >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>>
>> > >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>> > >> > wrote:
>> > >> >> Wow. Where have you found that price?
>>
>> > >> >> Carl
>>
>> > >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> > >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>>
>> > >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>> > >> >> > wrote:
>> > >> >> >> 06 GC probably has the aluminum D44, but that's just a guess.
>> > >> >> >> I
>> > >> >> >> have
>> > >> >> >> heard
>> > >> >> >> good things about the Lockright, but nothing about the aussie
>> > >> >> >> locker.
>>
>> > >> >> >> Carl
>>
>> > >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> > >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>>
>> > >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
>> > >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>>
>> > >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
>> > >> >> >> >> > <billhug...@***.net>
>> > >> >> >> >> > wrote:
>>
>> > >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as
>> > >> >> >> >> > > they
>> > >> >> >> >> > > were
>> > >> >> >> >> > > going
>> > >> >> >> >> > > under, Like Mike Romain's
>> > >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
>> > >> >> >> >> > > 20's cover will be exactly
>> > >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
>> > >> >> >> >> > > God Bless America, Bill 0|||||||0
>> > >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> > >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>>
>> > >> >> >> >> > > > I'm going to look at it now, you may be right. I
>> > >> >> >> >> > > > don't
>> > >> >> >> >> > > > know.
>> > >> >> >> >> > > > Chrysler
>> > >> >> >> >> > > > 8.25?
>>
>> > >> >> >> >> > > > Greg
>>
>> > >> >> >> >> > > --
>> > >> >> >> >> > > Posted via a free Usenet account
>> > >> >> >> >> > > fromhttp://www.teranews.com
>>
>> > >> >> >> >> > Its a D35
>>
>> > >> >> >> >> > Greg
>>
>> > >> >> >> >> Its the same as my yj
>>
>> > >> >> >> >> Greg- Hide quoted text -
>>
>> > >> >> >> >> - Show quoted text -
>>
>> > >> >> >> > I know in my prior post I said it was not the same as my yj,
>> > >> >> >> > but
>> > >> >> >> > I
>> > >> >> >> > took a closer look, and it is. D30 up front. I also own a
>> > >> >> >> > 2006 GC
>> > >> >> >> > limited, 4.7 litre. What axle would that have?
>>
>> > >> >> >> > Greg- Hide quoted text -
>>
>> > >> >> >> - Show quoted text -
>>
>> > >> >> > I want to go as cheap as possible. It is just light off roading
>> > >> >> > I
>> > >> >> > do.
>> > >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>>
>> > >> >> > Greg- Hide quoted text -
>>
>> > >> >> - Show quoted text -
>>
>> > >> > D35 and D30 229.00 each
>>
>> > >> > Greg- Hide quoted text -
>>
>> > >> - Show quoted text -
>>
>> > > I can't find info on 06 GC rear end.
>>
>> > > Greg- Hide quoted text -
>>
>> > - Show quoted text -
>>
>> Were are you looking?
>>
>> Greg- Hide quoted text -
>>
>> - Show quoted text -
>
> Where**
>
#62
Guest
Posts: n/a
Re: Lockers
It will be the AMC 20, but they did use Dana 44s as they were going
under, Like Mike Romain's here: http://----------.com/mikeRomain/ The AMC
20's cover will be exactly round:
http://www.crownautomotive.net/catal...leCJSJ20R.html
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jerryg" <Gregginn7@msn.com> wrote in message
>
> I'm going to look at it now, you may be right. I don't know. Chrysler
> 8.25?
>
> Greg
>
--
Posted via a free Usenet account from http://www.teranews.com
under, Like Mike Romain's here: http://----------.com/mikeRomain/ The AMC
20's cover will be exactly round:
http://www.crownautomotive.net/catal...leCJSJ20R.html
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jerryg" <Gregginn7@msn.com> wrote in message
>
> I'm going to look at it now, you may be right. I don't know. Chrysler
> 8.25?
>
> Greg
>
--
Posted via a free Usenet account from http://www.teranews.com
#63
Guest
Posts: n/a
Re: Lockers
It will be the AMC 20, but they did use Dana 44s as they were going
under, Like Mike Romain's here: http://----------.com/mikeRomain/ The AMC
20's cover will be exactly round:
http://www.crownautomotive.net/catal...leCJSJ20R.html
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jerryg" <Gregginn7@msn.com> wrote in message
>
> I'm going to look at it now, you may be right. I don't know. Chrysler
> 8.25?
>
> Greg
>
--
Posted via a free Usenet account from http://www.teranews.com
under, Like Mike Romain's here: http://----------.com/mikeRomain/ The AMC
20's cover will be exactly round:
http://www.crownautomotive.net/catal...leCJSJ20R.html
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jerryg" <Gregginn7@msn.com> wrote in message
>
> I'm going to look at it now, you may be right. I don't know. Chrysler
> 8.25?
>
> Greg
>
--
Posted via a free Usenet account from http://www.teranews.com
#64
Guest
Posts: n/a
Re: Lockers
It will be the AMC 20, but they did use Dana 44s as they were going
under, Like Mike Romain's here: http://----------.com/mikeRomain/ The AMC
20's cover will be exactly round:
http://www.crownautomotive.net/catal...leCJSJ20R.html
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jerryg" <Gregginn7@msn.com> wrote in message
>
> I'm going to look at it now, you may be right. I don't know. Chrysler
> 8.25?
>
> Greg
>
--
Posted via a free Usenet account from http://www.teranews.com
under, Like Mike Romain's here: http://----------.com/mikeRomain/ The AMC
20's cover will be exactly round:
http://www.crownautomotive.net/catal...leCJSJ20R.html
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jerryg" <Gregginn7@msn.com> wrote in message
>
> I'm going to look at it now, you may be right. I don't know. Chrysler
> 8.25?
>
> Greg
>
--
Posted via a free Usenet account from http://www.teranews.com
#65
Guest
Posts: n/a
Re: Lockers
On Mar 20, 10:58 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> Actually, it looks like the standard axle was a '213MM Rear' (probably a
> corp. axle) and the D44 is a upgrade.
>
> Carl
>
> "jerryg" <Greggi...@msn.com> wrote in message
>
> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>
>
>
> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> Too bad they don't offer one for the 8.25.
>
> >> Carl
>
> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>
> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> >> Wow. Where have you found that price?
>
> >> >> Carl
>
> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>
> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess. I
> >> >> >> have
> >> >> >> heard
> >> >> >> good things about the Lockright, but nothing about the aussie
> >> >> >> locker.
>
> >> >> >> Carl
>
> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>
> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>
> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
> >> >> >> >> > <billhug...@***.net>
> >> >> >> >> > wrote:
>
> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as they
> >> >> >> >> > > were
> >> >> >> >> > > going
> >> >> >> >> > > under, Like Mike Romain's
> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
> >> >> >> >> > > 20's cover will be exactly
> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
> >> >> >> >> > > God Bless America, Bill 0|||||||0
> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>
> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >> >> >> > > > I'm going to look at it now, you may be right. I don't
> >> >> >> >> > > > know.
> >> >> >> >> > > > Chrysler
> >> >> >> >> > > > 8.25?
>
> >> >> >> >> > > > Greg
>
> >> >> >> >> > > --
> >> >> >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com
>
> >> >> >> >> > Its a D35
>
> >> >> >> >> > Greg
>
> >> >> >> >> Its the same as my yj
>
> >> >> >> >> Greg- Hide quoted text -
>
> >> >> >> >> - Show quoted text -
>
> >> >> >> > I know in my prior post I said it was not the same as my yj, but
> >> >> >> > I
> >> >> >> > took a closer look, and it is. D30 up front. I also own a 2006 GC
> >> >> >> > limited, 4.7 litre. What axle would that have?
>
> >> >> >> > Greg- Hide quoted text -
>
> >> >> >> - Show quoted text -
>
> >> >> > I want to go as cheap as possible. It is just light off roading I
> >> >> > do.
> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>
> >> >> > Greg- Hide quoted text -
>
> >> >> - Show quoted text -
>
> >> > D35 and D30 229.00 each
>
> >> > Greg- Hide quoted text -
>
> >> - Show quoted text -
>
> > I can't find info on 06 GC rear end.
>
> > Greg- Hide quoted text -
>
> - Show quoted text -
Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
86.
Greg
> Actually, it looks like the standard axle was a '213MM Rear' (probably a
> corp. axle) and the D44 is a upgrade.
>
> Carl
>
> "jerryg" <Greggi...@msn.com> wrote in message
>
> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>
>
>
> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> Too bad they don't offer one for the 8.25.
>
> >> Carl
>
> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>
> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> >> Wow. Where have you found that price?
>
> >> >> Carl
>
> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>
> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess. I
> >> >> >> have
> >> >> >> heard
> >> >> >> good things about the Lockright, but nothing about the aussie
> >> >> >> locker.
>
> >> >> >> Carl
>
> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>
> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>
> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
> >> >> >> >> > <billhug...@***.net>
> >> >> >> >> > wrote:
>
> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as they
> >> >> >> >> > > were
> >> >> >> >> > > going
> >> >> >> >> > > under, Like Mike Romain's
> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
> >> >> >> >> > > 20's cover will be exactly
> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
> >> >> >> >> > > God Bless America, Bill 0|||||||0
> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>
> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >> >> >> > > > I'm going to look at it now, you may be right. I don't
> >> >> >> >> > > > know.
> >> >> >> >> > > > Chrysler
> >> >> >> >> > > > 8.25?
>
> >> >> >> >> > > > Greg
>
> >> >> >> >> > > --
> >> >> >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com
>
> >> >> >> >> > Its a D35
>
> >> >> >> >> > Greg
>
> >> >> >> >> Its the same as my yj
>
> >> >> >> >> Greg- Hide quoted text -
>
> >> >> >> >> - Show quoted text -
>
> >> >> >> > I know in my prior post I said it was not the same as my yj, but
> >> >> >> > I
> >> >> >> > took a closer look, and it is. D30 up front. I also own a 2006 GC
> >> >> >> > limited, 4.7 litre. What axle would that have?
>
> >> >> >> > Greg- Hide quoted text -
>
> >> >> >> - Show quoted text -
>
> >> >> > I want to go as cheap as possible. It is just light off roading I
> >> >> > do.
> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>
> >> >> > Greg- Hide quoted text -
>
> >> >> - Show quoted text -
>
> >> > D35 and D30 229.00 each
>
> >> > Greg- Hide quoted text -
>
> >> - Show quoted text -
>
> > I can't find info on 06 GC rear end.
>
> > Greg- Hide quoted text -
>
> - Show quoted text -
Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
86.
Greg
#66
Guest
Posts: n/a
Re: Lockers
On Mar 20, 10:58 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> Actually, it looks like the standard axle was a '213MM Rear' (probably a
> corp. axle) and the D44 is a upgrade.
>
> Carl
>
> "jerryg" <Greggi...@msn.com> wrote in message
>
> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>
>
>
> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> Too bad they don't offer one for the 8.25.
>
> >> Carl
>
> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>
> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> >> Wow. Where have you found that price?
>
> >> >> Carl
>
> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>
> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess. I
> >> >> >> have
> >> >> >> heard
> >> >> >> good things about the Lockright, but nothing about the aussie
> >> >> >> locker.
>
> >> >> >> Carl
>
> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>
> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>
> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
> >> >> >> >> > <billhug...@***.net>
> >> >> >> >> > wrote:
>
> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as they
> >> >> >> >> > > were
> >> >> >> >> > > going
> >> >> >> >> > > under, Like Mike Romain's
> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
> >> >> >> >> > > 20's cover will be exactly
> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
> >> >> >> >> > > God Bless America, Bill 0|||||||0
> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>
> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >> >> >> > > > I'm going to look at it now, you may be right. I don't
> >> >> >> >> > > > know.
> >> >> >> >> > > > Chrysler
> >> >> >> >> > > > 8.25?
>
> >> >> >> >> > > > Greg
>
> >> >> >> >> > > --
> >> >> >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com
>
> >> >> >> >> > Its a D35
>
> >> >> >> >> > Greg
>
> >> >> >> >> Its the same as my yj
>
> >> >> >> >> Greg- Hide quoted text -
>
> >> >> >> >> - Show quoted text -
>
> >> >> >> > I know in my prior post I said it was not the same as my yj, but
> >> >> >> > I
> >> >> >> > took a closer look, and it is. D30 up front. I also own a 2006 GC
> >> >> >> > limited, 4.7 litre. What axle would that have?
>
> >> >> >> > Greg- Hide quoted text -
>
> >> >> >> - Show quoted text -
>
> >> >> > I want to go as cheap as possible. It is just light off roading I
> >> >> > do.
> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>
> >> >> > Greg- Hide quoted text -
>
> >> >> - Show quoted text -
>
> >> > D35 and D30 229.00 each
>
> >> > Greg- Hide quoted text -
>
> >> - Show quoted text -
>
> > I can't find info on 06 GC rear end.
>
> > Greg- Hide quoted text -
>
> - Show quoted text -
Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
86.
Greg
> Actually, it looks like the standard axle was a '213MM Rear' (probably a
> corp. axle) and the D44 is a upgrade.
>
> Carl
>
> "jerryg" <Greggi...@msn.com> wrote in message
>
> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>
>
>
> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> Too bad they don't offer one for the 8.25.
>
> >> Carl
>
> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>
> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> >> Wow. Where have you found that price?
>
> >> >> Carl
>
> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>
> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess. I
> >> >> >> have
> >> >> >> heard
> >> >> >> good things about the Lockright, but nothing about the aussie
> >> >> >> locker.
>
> >> >> >> Carl
>
> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>
> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>
> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
> >> >> >> >> > <billhug...@***.net>
> >> >> >> >> > wrote:
>
> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as they
> >> >> >> >> > > were
> >> >> >> >> > > going
> >> >> >> >> > > under, Like Mike Romain's
> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
> >> >> >> >> > > 20's cover will be exactly
> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
> >> >> >> >> > > God Bless America, Bill 0|||||||0
> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>
> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >> >> >> > > > I'm going to look at it now, you may be right. I don't
> >> >> >> >> > > > know.
> >> >> >> >> > > > Chrysler
> >> >> >> >> > > > 8.25?
>
> >> >> >> >> > > > Greg
>
> >> >> >> >> > > --
> >> >> >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com
>
> >> >> >> >> > Its a D35
>
> >> >> >> >> > Greg
>
> >> >> >> >> Its the same as my yj
>
> >> >> >> >> Greg- Hide quoted text -
>
> >> >> >> >> - Show quoted text -
>
> >> >> >> > I know in my prior post I said it was not the same as my yj, but
> >> >> >> > I
> >> >> >> > took a closer look, and it is. D30 up front. I also own a 2006 GC
> >> >> >> > limited, 4.7 litre. What axle would that have?
>
> >> >> >> > Greg- Hide quoted text -
>
> >> >> >> - Show quoted text -
>
> >> >> > I want to go as cheap as possible. It is just light off roading I
> >> >> > do.
> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>
> >> >> > Greg- Hide quoted text -
>
> >> >> - Show quoted text -
>
> >> > D35 and D30 229.00 each
>
> >> > Greg- Hide quoted text -
>
> >> - Show quoted text -
>
> > I can't find info on 06 GC rear end.
>
> > Greg- Hide quoted text -
>
> - Show quoted text -
Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
86.
Greg
#67
Guest
Posts: n/a
Re: Lockers
On Mar 20, 10:58 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> Actually, it looks like the standard axle was a '213MM Rear' (probably a
> corp. axle) and the D44 is a upgrade.
>
> Carl
>
> "jerryg" <Greggi...@msn.com> wrote in message
>
> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>
>
>
> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> Too bad they don't offer one for the 8.25.
>
> >> Carl
>
> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>
> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> >> Wow. Where have you found that price?
>
> >> >> Carl
>
> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>
> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess. I
> >> >> >> have
> >> >> >> heard
> >> >> >> good things about the Lockright, but nothing about the aussie
> >> >> >> locker.
>
> >> >> >> Carl
>
> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>
> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>
> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
> >> >> >> >> > <billhug...@***.net>
> >> >> >> >> > wrote:
>
> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as they
> >> >> >> >> > > were
> >> >> >> >> > > going
> >> >> >> >> > > under, Like Mike Romain's
> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
> >> >> >> >> > > 20's cover will be exactly
> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
> >> >> >> >> > > God Bless America, Bill 0|||||||0
> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>
> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >> >> >> > > > I'm going to look at it now, you may be right. I don't
> >> >> >> >> > > > know.
> >> >> >> >> > > > Chrysler
> >> >> >> >> > > > 8.25?
>
> >> >> >> >> > > > Greg
>
> >> >> >> >> > > --
> >> >> >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com
>
> >> >> >> >> > Its a D35
>
> >> >> >> >> > Greg
>
> >> >> >> >> Its the same as my yj
>
> >> >> >> >> Greg- Hide quoted text -
>
> >> >> >> >> - Show quoted text -
>
> >> >> >> > I know in my prior post I said it was not the same as my yj, but
> >> >> >> > I
> >> >> >> > took a closer look, and it is. D30 up front. I also own a 2006 GC
> >> >> >> > limited, 4.7 litre. What axle would that have?
>
> >> >> >> > Greg- Hide quoted text -
>
> >> >> >> - Show quoted text -
>
> >> >> > I want to go as cheap as possible. It is just light off roading I
> >> >> > do.
> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>
> >> >> > Greg- Hide quoted text -
>
> >> >> - Show quoted text -
>
> >> > D35 and D30 229.00 each
>
> >> > Greg- Hide quoted text -
>
> >> - Show quoted text -
>
> > I can't find info on 06 GC rear end.
>
> > Greg- Hide quoted text -
>
> - Show quoted text -
Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
86.
Greg
> Actually, it looks like the standard axle was a '213MM Rear' (probably a
> corp. axle) and the D44 is a upgrade.
>
> Carl
>
> "jerryg" <Greggi...@msn.com> wrote in message
>
> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>
>
>
> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> Too bad they don't offer one for the 8.25.
>
> >> Carl
>
> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>
> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> >> Wow. Where have you found that price?
>
> >> >> Carl
>
> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>
> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess. I
> >> >> >> have
> >> >> >> heard
> >> >> >> good things about the Lockright, but nothing about the aussie
> >> >> >> locker.
>
> >> >> >> Carl
>
> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>
> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>
> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
> >> >> >> >> > <billhug...@***.net>
> >> >> >> >> > wrote:
>
> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as they
> >> >> >> >> > > were
> >> >> >> >> > > going
> >> >> >> >> > > under, Like Mike Romain's
> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
> >> >> >> >> > > 20's cover will be exactly
> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
> >> >> >> >> > > God Bless America, Bill 0|||||||0
> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>
> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>
> >> >> >> >> > > > I'm going to look at it now, you may be right. I don't
> >> >> >> >> > > > know.
> >> >> >> >> > > > Chrysler
> >> >> >> >> > > > 8.25?
>
> >> >> >> >> > > > Greg
>
> >> >> >> >> > > --
> >> >> >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com
>
> >> >> >> >> > Its a D35
>
> >> >> >> >> > Greg
>
> >> >> >> >> Its the same as my yj
>
> >> >> >> >> Greg- Hide quoted text -
>
> >> >> >> >> - Show quoted text -
>
> >> >> >> > I know in my prior post I said it was not the same as my yj, but
> >> >> >> > I
> >> >> >> > took a closer look, and it is. D30 up front. I also own a 2006 GC
> >> >> >> > limited, 4.7 litre. What axle would that have?
>
> >> >> >> > Greg- Hide quoted text -
>
> >> >> >> - Show quoted text -
>
> >> >> > I want to go as cheap as possible. It is just light off roading I
> >> >> > do.
> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>
> >> >> > Greg- Hide quoted text -
>
> >> >> - Show quoted text -
>
> >> > D35 and D30 229.00 each
>
> >> > Greg- Hide quoted text -
>
> >> - Show quoted text -
>
> > I can't find info on 06 GC rear end.
>
> > Greg- Hide quoted text -
>
> - Show quoted text -
Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
86.
Greg
#68
Guest
Posts: n/a
Re: Lockers
Let us know how you like 'em, I'm looking at an Aussie when I get ready to
lock my D30.
Carl
"jerryg" <Gregginn7@msn.com> wrote in message
news:1174449663.403952.218570@p15g2000hsd.googlegr oups.com...
> On Mar 20, 10:58 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> Actually, it looks like the standard axle was a '213MM Rear' (probably a
>> corp. axle) and the D44 is a upgrade.
>>
>> Carl
>>
>> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>>
>>
>>
>> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> >> Too bad they don't offer one for the 8.25.
>>
>> >> Carl
>>
>> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>>
>> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> >> >> Wow. Where have you found that price?
>>
>> >> >> Carl
>>
>> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>>
>> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>> >> >> > wrote:
>> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess. I
>> >> >> >> have
>> >> >> >> heard
>> >> >> >> good things about the Lockright, but nothing about the aussie
>> >> >> >> locker.
>>
>> >> >> >> Carl
>>
>> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>>
>> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
>> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>>
>> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
>> >> >> >> >> > <billhug...@***.net>
>> >> >> >> >> > wrote:
>>
>> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as
>> >> >> >> >> > > they
>> >> >> >> >> > > were
>> >> >> >> >> > > going
>> >> >> >> >> > > under, Like Mike Romain's
>> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
>> >> >> >> >> > > 20's cover will be exactly
>> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
>> >> >> >> >> > > God Bless America, Bill 0|||||||0
>> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >> >> >> > > > I'm going to look at it now, you may be right. I don't
>> >> >> >> >> > > > know.
>> >> >> >> >> > > > Chrysler
>> >> >> >> >> > > > 8.25?
>>
>> >> >> >> >> > > > Greg
>>
>> >> >> >> >> > > --
>> >> >> >> >> > > Posted via a free Usenet account
>> >> >> >> >> > > fromhttp://www.teranews.com
>>
>> >> >> >> >> > Its a D35
>>
>> >> >> >> >> > Greg
>>
>> >> >> >> >> Its the same as my yj
>>
>> >> >> >> >> Greg- Hide quoted text -
>>
>> >> >> >> >> - Show quoted text -
>>
>> >> >> >> > I know in my prior post I said it was not the same as my yj,
>> >> >> >> > but
>> >> >> >> > I
>> >> >> >> > took a closer look, and it is. D30 up front. I also own a 2006
>> >> >> >> > GC
>> >> >> >> > limited, 4.7 litre. What axle would that have?
>>
>> >> >> >> > Greg- Hide quoted text -
>>
>> >> >> >> - Show quoted text -
>>
>> >> >> > I want to go as cheap as possible. It is just light off roading I
>> >> >> > do.
>> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>>
>> >> >> > Greg- Hide quoted text -
>>
>> >> >> - Show quoted text -
>>
>> >> > D35 and D30 229.00 each
>>
>> >> > Greg- Hide quoted text -
>>
>> >> - Show quoted text -
>>
>> > I can't find info on 06 GC rear end.
>>
>> > Greg- Hide quoted text -
>>
>> - Show quoted text -
>
> Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
> 86.
>
> Greg
>
lock my D30.
Carl
"jerryg" <Gregginn7@msn.com> wrote in message
news:1174449663.403952.218570@p15g2000hsd.googlegr oups.com...
> On Mar 20, 10:58 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> Actually, it looks like the standard axle was a '213MM Rear' (probably a
>> corp. axle) and the D44 is a upgrade.
>>
>> Carl
>>
>> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>>
>>
>>
>> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> >> Too bad they don't offer one for the 8.25.
>>
>> >> Carl
>>
>> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>>
>> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> >> >> Wow. Where have you found that price?
>>
>> >> >> Carl
>>
>> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>>
>> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>> >> >> > wrote:
>> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess. I
>> >> >> >> have
>> >> >> >> heard
>> >> >> >> good things about the Lockright, but nothing about the aussie
>> >> >> >> locker.
>>
>> >> >> >> Carl
>>
>> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>>
>> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
>> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>>
>> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
>> >> >> >> >> > <billhug...@***.net>
>> >> >> >> >> > wrote:
>>
>> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as
>> >> >> >> >> > > they
>> >> >> >> >> > > were
>> >> >> >> >> > > going
>> >> >> >> >> > > under, Like Mike Romain's
>> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
>> >> >> >> >> > > 20's cover will be exactly
>> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
>> >> >> >> >> > > God Bless America, Bill 0|||||||0
>> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >> >> >> > > > I'm going to look at it now, you may be right. I don't
>> >> >> >> >> > > > know.
>> >> >> >> >> > > > Chrysler
>> >> >> >> >> > > > 8.25?
>>
>> >> >> >> >> > > > Greg
>>
>> >> >> >> >> > > --
>> >> >> >> >> > > Posted via a free Usenet account
>> >> >> >> >> > > fromhttp://www.teranews.com
>>
>> >> >> >> >> > Its a D35
>>
>> >> >> >> >> > Greg
>>
>> >> >> >> >> Its the same as my yj
>>
>> >> >> >> >> Greg- Hide quoted text -
>>
>> >> >> >> >> - Show quoted text -
>>
>> >> >> >> > I know in my prior post I said it was not the same as my yj,
>> >> >> >> > but
>> >> >> >> > I
>> >> >> >> > took a closer look, and it is. D30 up front. I also own a 2006
>> >> >> >> > GC
>> >> >> >> > limited, 4.7 litre. What axle would that have?
>>
>> >> >> >> > Greg- Hide quoted text -
>>
>> >> >> >> - Show quoted text -
>>
>> >> >> > I want to go as cheap as possible. It is just light off roading I
>> >> >> > do.
>> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>>
>> >> >> > Greg- Hide quoted text -
>>
>> >> >> - Show quoted text -
>>
>> >> > D35 and D30 229.00 each
>>
>> >> > Greg- Hide quoted text -
>>
>> >> - Show quoted text -
>>
>> > I can't find info on 06 GC rear end.
>>
>> > Greg- Hide quoted text -
>>
>> - Show quoted text -
>
> Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
> 86.
>
> Greg
>
#69
Guest
Posts: n/a
Re: Lockers
Let us know how you like 'em, I'm looking at an Aussie when I get ready to
lock my D30.
Carl
"jerryg" <Gregginn7@msn.com> wrote in message
news:1174449663.403952.218570@p15g2000hsd.googlegr oups.com...
> On Mar 20, 10:58 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> Actually, it looks like the standard axle was a '213MM Rear' (probably a
>> corp. axle) and the D44 is a upgrade.
>>
>> Carl
>>
>> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>>
>>
>>
>> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> >> Too bad they don't offer one for the 8.25.
>>
>> >> Carl
>>
>> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>>
>> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> >> >> Wow. Where have you found that price?
>>
>> >> >> Carl
>>
>> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>>
>> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>> >> >> > wrote:
>> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess. I
>> >> >> >> have
>> >> >> >> heard
>> >> >> >> good things about the Lockright, but nothing about the aussie
>> >> >> >> locker.
>>
>> >> >> >> Carl
>>
>> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>>
>> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
>> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>>
>> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
>> >> >> >> >> > <billhug...@***.net>
>> >> >> >> >> > wrote:
>>
>> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as
>> >> >> >> >> > > they
>> >> >> >> >> > > were
>> >> >> >> >> > > going
>> >> >> >> >> > > under, Like Mike Romain's
>> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
>> >> >> >> >> > > 20's cover will be exactly
>> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
>> >> >> >> >> > > God Bless America, Bill 0|||||||0
>> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >> >> >> > > > I'm going to look at it now, you may be right. I don't
>> >> >> >> >> > > > know.
>> >> >> >> >> > > > Chrysler
>> >> >> >> >> > > > 8.25?
>>
>> >> >> >> >> > > > Greg
>>
>> >> >> >> >> > > --
>> >> >> >> >> > > Posted via a free Usenet account
>> >> >> >> >> > > fromhttp://www.teranews.com
>>
>> >> >> >> >> > Its a D35
>>
>> >> >> >> >> > Greg
>>
>> >> >> >> >> Its the same as my yj
>>
>> >> >> >> >> Greg- Hide quoted text -
>>
>> >> >> >> >> - Show quoted text -
>>
>> >> >> >> > I know in my prior post I said it was not the same as my yj,
>> >> >> >> > but
>> >> >> >> > I
>> >> >> >> > took a closer look, and it is. D30 up front. I also own a 2006
>> >> >> >> > GC
>> >> >> >> > limited, 4.7 litre. What axle would that have?
>>
>> >> >> >> > Greg- Hide quoted text -
>>
>> >> >> >> - Show quoted text -
>>
>> >> >> > I want to go as cheap as possible. It is just light off roading I
>> >> >> > do.
>> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>>
>> >> >> > Greg- Hide quoted text -
>>
>> >> >> - Show quoted text -
>>
>> >> > D35 and D30 229.00 each
>>
>> >> > Greg- Hide quoted text -
>>
>> >> - Show quoted text -
>>
>> > I can't find info on 06 GC rear end.
>>
>> > Greg- Hide quoted text -
>>
>> - Show quoted text -
>
> Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
> 86.
>
> Greg
>
lock my D30.
Carl
"jerryg" <Gregginn7@msn.com> wrote in message
news:1174449663.403952.218570@p15g2000hsd.googlegr oups.com...
> On Mar 20, 10:58 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> Actually, it looks like the standard axle was a '213MM Rear' (probably a
>> corp. axle) and the D44 is a upgrade.
>>
>> Carl
>>
>> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>>
>>
>>
>> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> >> Too bad they don't offer one for the 8.25.
>>
>> >> Carl
>>
>> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>>
>> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> >> >> Wow. Where have you found that price?
>>
>> >> >> Carl
>>
>> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>>
>> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>> >> >> > wrote:
>> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess. I
>> >> >> >> have
>> >> >> >> heard
>> >> >> >> good things about the Lockright, but nothing about the aussie
>> >> >> >> locker.
>>
>> >> >> >> Carl
>>
>> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>>
>> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
>> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>>
>> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
>> >> >> >> >> > <billhug...@***.net>
>> >> >> >> >> > wrote:
>>
>> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as
>> >> >> >> >> > > they
>> >> >> >> >> > > were
>> >> >> >> >> > > going
>> >> >> >> >> > > under, Like Mike Romain's
>> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
>> >> >> >> >> > > 20's cover will be exactly
>> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
>> >> >> >> >> > > God Bless America, Bill 0|||||||0
>> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >> >> >> > > > I'm going to look at it now, you may be right. I don't
>> >> >> >> >> > > > know.
>> >> >> >> >> > > > Chrysler
>> >> >> >> >> > > > 8.25?
>>
>> >> >> >> >> > > > Greg
>>
>> >> >> >> >> > > --
>> >> >> >> >> > > Posted via a free Usenet account
>> >> >> >> >> > > fromhttp://www.teranews.com
>>
>> >> >> >> >> > Its a D35
>>
>> >> >> >> >> > Greg
>>
>> >> >> >> >> Its the same as my yj
>>
>> >> >> >> >> Greg- Hide quoted text -
>>
>> >> >> >> >> - Show quoted text -
>>
>> >> >> >> > I know in my prior post I said it was not the same as my yj,
>> >> >> >> > but
>> >> >> >> > I
>> >> >> >> > took a closer look, and it is. D30 up front. I also own a 2006
>> >> >> >> > GC
>> >> >> >> > limited, 4.7 litre. What axle would that have?
>>
>> >> >> >> > Greg- Hide quoted text -
>>
>> >> >> >> - Show quoted text -
>>
>> >> >> > I want to go as cheap as possible. It is just light off roading I
>> >> >> > do.
>> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>>
>> >> >> > Greg- Hide quoted text -
>>
>> >> >> - Show quoted text -
>>
>> >> > D35 and D30 229.00 each
>>
>> >> > Greg- Hide quoted text -
>>
>> >> - Show quoted text -
>>
>> > I can't find info on 06 GC rear end.
>>
>> > Greg- Hide quoted text -
>>
>> - Show quoted text -
>
> Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
> 86.
>
> Greg
>
#70
Guest
Posts: n/a
Re: Lockers
Let us know how you like 'em, I'm looking at an Aussie when I get ready to
lock my D30.
Carl
"jerryg" <Gregginn7@msn.com> wrote in message
news:1174449663.403952.218570@p15g2000hsd.googlegr oups.com...
> On Mar 20, 10:58 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> Actually, it looks like the standard axle was a '213MM Rear' (probably a
>> corp. axle) and the D44 is a upgrade.
>>
>> Carl
>>
>> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>>
>>
>>
>> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> >> Too bad they don't offer one for the 8.25.
>>
>> >> Carl
>>
>> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>>
>> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> >> >> Wow. Where have you found that price?
>>
>> >> >> Carl
>>
>> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>>
>> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>> >> >> > wrote:
>> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess. I
>> >> >> >> have
>> >> >> >> heard
>> >> >> >> good things about the Lockright, but nothing about the aussie
>> >> >> >> locker.
>>
>> >> >> >> Carl
>>
>> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>>
>> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
>> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>>
>> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
>> >> >> >> >> > <billhug...@***.net>
>> >> >> >> >> > wrote:
>>
>> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as
>> >> >> >> >> > > they
>> >> >> >> >> > > were
>> >> >> >> >> > > going
>> >> >> >> >> > > under, Like Mike Romain's
>> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
>> >> >> >> >> > > 20's cover will be exactly
>> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
>> >> >> >> >> > > God Bless America, Bill 0|||||||0
>> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >> >> >> > > > I'm going to look at it now, you may be right. I don't
>> >> >> >> >> > > > know.
>> >> >> >> >> > > > Chrysler
>> >> >> >> >> > > > 8.25?
>>
>> >> >> >> >> > > > Greg
>>
>> >> >> >> >> > > --
>> >> >> >> >> > > Posted via a free Usenet account
>> >> >> >> >> > > fromhttp://www.teranews.com
>>
>> >> >> >> >> > Its a D35
>>
>> >> >> >> >> > Greg
>>
>> >> >> >> >> Its the same as my yj
>>
>> >> >> >> >> Greg- Hide quoted text -
>>
>> >> >> >> >> - Show quoted text -
>>
>> >> >> >> > I know in my prior post I said it was not the same as my yj,
>> >> >> >> > but
>> >> >> >> > I
>> >> >> >> > took a closer look, and it is. D30 up front. I also own a 2006
>> >> >> >> > GC
>> >> >> >> > limited, 4.7 litre. What axle would that have?
>>
>> >> >> >> > Greg- Hide quoted text -
>>
>> >> >> >> - Show quoted text -
>>
>> >> >> > I want to go as cheap as possible. It is just light off roading I
>> >> >> > do.
>> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>>
>> >> >> > Greg- Hide quoted text -
>>
>> >> >> - Show quoted text -
>>
>> >> > D35 and D30 229.00 each
>>
>> >> > Greg- Hide quoted text -
>>
>> >> - Show quoted text -
>>
>> > I can't find info on 06 GC rear end.
>>
>> > Greg- Hide quoted text -
>>
>> - Show quoted text -
>
> Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
> 86.
>
> Greg
>
lock my D30.
Carl
"jerryg" <Gregginn7@msn.com> wrote in message
news:1174449663.403952.218570@p15g2000hsd.googlegr oups.com...
> On Mar 20, 10:58 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> Actually, it looks like the standard axle was a '213MM Rear' (probably a
>> corp. axle) and the D44 is a upgrade.
>>
>> Carl
>>
>> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> news:1174449183.226316.203400@p15g2000hsd.googlegr oups.com...
>>
>>
>>
>> > On Mar 20, 10:47 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> >> Too bad they don't offer one for the 8.25.
>>
>> >> Carl
>>
>> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >>news:1174448740.918372.211730@l75g2000hse.google groups.com...
>>
>> >> > On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
>> >> >> Wow. Where have you found that price?
>>
>> >> >> Carl
>>
>> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >>news:1174448013.220473.188660@l75g2000hse.google groups.com...
>>
>> >> >> > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com>
>> >> >> > wrote:
>> >> >> >> 06 GC probably has the aluminum D44, but that's just a guess. I
>> >> >> >> have
>> >> >> >> heard
>> >> >> >> good things about the Lockright, but nothing about the aussie
>> >> >> >> locker.
>>
>> >> >> >> Carl
>>
>> >> >> >> "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >> >>news:1174447755.707755.214910@y66g2000hsf.google groups.com...
>>
>> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
>> >> >> >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
>>
>> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III"
>> >> >> >> >> > <billhug...@***.net>
>> >> >> >> >> > wrote:
>>
>> >> >> >> >> > > It will be the AMC 20, but they did use Dana 44s as
>> >> >> >> >> > > they
>> >> >> >> >> > > were
>> >> >> >> >> > > going
>> >> >> >> >> > > under, Like Mike Romain's
>> >> >> >> >> > > here:http://----------.com/mikeRomain/TheAMC
>> >> >> >> >> > > 20's cover will be exactly
>> >> >> >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html
>> >> >> >> >> > > God Bless America, Bill 0|||||||0
>> >> >> >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> >> >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message
>>
>> >> >> >> >> > > > I'm going to look at it now, you may be right. I don't
>> >> >> >> >> > > > know.
>> >> >> >> >> > > > Chrysler
>> >> >> >> >> > > > 8.25?
>>
>> >> >> >> >> > > > Greg
>>
>> >> >> >> >> > > --
>> >> >> >> >> > > Posted via a free Usenet account
>> >> >> >> >> > > fromhttp://www.teranews.com
>>
>> >> >> >> >> > Its a D35
>>
>> >> >> >> >> > Greg
>>
>> >> >> >> >> Its the same as my yj
>>
>> >> >> >> >> Greg- Hide quoted text -
>>
>> >> >> >> >> - Show quoted text -
>>
>> >> >> >> > I know in my prior post I said it was not the same as my yj,
>> >> >> >> > but
>> >> >> >> > I
>> >> >> >> > took a closer look, and it is. D30 up front. I also own a 2006
>> >> >> >> > GC
>> >> >> >> > limited, 4.7 litre. What axle would that have?
>>
>> >> >> >> > Greg- Hide quoted text -
>>
>> >> >> >> - Show quoted text -
>>
>> >> >> > I want to go as cheap as possible. It is just light off roading I
>> >> >> > do.
>> >> >> > The Aussie set up is 460.00 for both axles. Sounds good to me!!
>>
>> >> >> > Greg- Hide quoted text -
>>
>> >> >> - Show quoted text -
>>
>> >> > D35 and D30 229.00 each
>>
>> >> > Greg- Hide quoted text -
>>
>> >> - Show quoted text -
>>
>> > I can't find info on 06 GC rear end.
>>
>> > Greg- Hide quoted text -
>>
>> - Show quoted text -
>
> Thanks alot Carl. I think I'm gunna buy those Aussie lockers for my
> 86.
>
> Greg
>