Earle Horton

There is no hole in it? I assume that there is at least a drain hole.

Earle

"Coasty" <uscg_ret at comcast dot net> wrote in message
news:EeedndZP44gx907enZ2dnUVZ_sSdnZ2d@comcast.com. ..
> The windshield screws can be a real bear but if you are intent then get
> yourself a hand held impact wrench with an impact torx head also, you want
> to line on some replacement screws. I just do not like drilling the
> windshield frame because eventually it will rust. I would just take the
> path of least resistance and just mount the lights up front on the bumper
or
> on a raised grill guard.
>
> Coasty
>
>
>
> "Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
> news:43d34040$0$31128$a82e2bb9@reader.athenanews.c om...
> > Leaving aside the question of why you would want to do this, unbolt the
> > sport bars and windshield base straps, from where they bolt to the
> > windshield frame, and fold it down. Then you will see if there are
holes
> > in
> > the windshield frame, to run the wires through.
> >
> > Earle
> >
> > "Jeff via CarKB.com" <u16314@uwe> wrote in message
> > news:5ab9c5a22e049@uwe...
> >> these where the lights i was thinking of getting for my 93 jeep
wrangler
> >>
> >
http://cgi.ebay.com/ebaymotors/KC-Wi...spagenameZWD1V
> >>
> >>
> >> thanks again
> >>
> >> jeff
> >>
> >> --
> >> Message posted via http://www.carkb.com
> >
> >
>
>

Earle Horton

There is no hole in it? I assume that there is at least a drain hole.

Earle

"Coasty" <uscg_ret at comcast dot net> wrote in message
news:EeedndZP44gx907enZ2dnUVZ_sSdnZ2d@comcast.com. ..
> The windshield screws can be a real bear but if you are intent then get
> yourself a hand held impact wrench with an impact torx head also, you want
> to line on some replacement screws. I just do not like drilling the
> windshield frame because eventually it will rust. I would just take the
> path of least resistance and just mount the lights up front on the bumper
or
> on a raised grill guard.
>
> Coasty
>
>
>
> "Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
> news:43d34040$0$31128$a82e2bb9@reader.athenanews.c om...
> > Leaving aside the question of why you would want to do this, unbolt the
> > sport bars and windshield base straps, from where they bolt to the
> > windshield frame, and fold it down. Then you will see if there are
holes
> > in
> > the windshield frame, to run the wires through.
> >
> > Earle
> >
> > "Jeff via CarKB.com" <u16314@uwe> wrote in message
> > news:5ab9c5a22e049@uwe...
> >> these where the lights i was thinking of getting for my 93 jeep
wrangler
> >>
> >
http://cgi.ebay.com/ebaymotors/KC-Wi...spagenameZWD1V
> >>
> >>
> >> thanks again
> >>
> >> jeff
> >>
> >> --
> >> Message posted via http://www.carkb.com
> >
> >
>
>

Earle Horton

There is no hole in it? I assume that there is at least a drain hole.

Earle

"Coasty" <uscg_ret at comcast dot net> wrote in message
news:EeedndZP44gx907enZ2dnUVZ_sSdnZ2d@comcast.com. ..
> The windshield screws can be a real bear but if you are intent then get
> yourself a hand held impact wrench with an impact torx head also, you want
> to line on some replacement screws. I just do not like drilling the
> windshield frame because eventually it will rust. I would just take the
> path of least resistance and just mount the lights up front on the bumper
or
> on a raised grill guard.
>
> Coasty
>
>
>
> "Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
> news:43d34040$0$31128$a82e2bb9@reader.athenanews.c om...
> > Leaving aside the question of why you would want to do this, unbolt the
> > sport bars and windshield base straps, from where they bolt to the
> > windshield frame, and fold it down. Then you will see if there are
holes
> > in
> > the windshield frame, to run the wires through.
> >
> > Earle
> >
> > "Jeff via CarKB.com" <u16314@uwe> wrote in message
> > news:5ab9c5a22e049@uwe...
> >> these where the lights i was thinking of getting for my 93 jeep
wrangler
> >>
> >
http://cgi.ebay.com/ebaymotors/KC-Wi...spagenameZWD1V
> >>
> >>
> >> thanks again
> >>
> >> jeff
> >>
> >> --
> >> Message posted via http://www.carkb.com
> >
> >
>
>

Matt Macchiarolo

Then I will pursue the subject, as in the first time you use those lights
the glare will be so bad off the shiny hood that you will (a) never use them
again, and hence they would only have value as bling, or (b) be forced to
spraypaint your hood flat black to eliminate the glare.

"Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
news:43d34040$0$31128$a82e2bb9@reader.athenanews.c om...
> Leaving aside the question of why you would want to do this,

Matt Macchiarolo

Then I will pursue the subject, as in the first time you use those lights
the glare will be so bad off the shiny hood that you will (a) never use them
again, and hence they would only have value as bling, or (b) be forced to
spraypaint your hood flat black to eliminate the glare.

"Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
news:43d34040$0$31128$a82e2bb9@reader.athenanews.c om...
> Leaving aside the question of why you would want to do this,

Matt Macchiarolo

Then I will pursue the subject, as in the first time you use those lights
the glare will be so bad off the shiny hood that you will (a) never use them
again, and hence they would only have value as bling, or (b) be forced to
spraypaint your hood flat black to eliminate the glare.

"Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
news:43d34040$0$31128$a82e2bb9@reader.athenanews.c om...
> Leaving aside the question of why you would want to do this,

Earle Horton

Damn it, Matt! Spoiled the joke!

Earle

"Matt Macchiarolo" <matt@nospamplease.com> wrote in message
news:8sKdnVEGuPtDdk7eRVn-rw@comcast.com...
> Then I will pursue the subject, as in the first time you use those lights
> the glare will be so bad off the shiny hood that you will (a) never use
them
> again, and hence they would only have value as bling, or (b) be forced to
> spraypaint your hood flat black to eliminate the glare.
>
> "Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
> news:43d34040$0$31128$a82e2bb9@reader.athenanews.c om...
> > Leaving aside the question of why you would want to do this,
>
>

Earle Horton

Damn it, Matt! Spoiled the joke!

Earle

"Matt Macchiarolo" <matt@nospamplease.com> wrote in message
news:8sKdnVEGuPtDdk7eRVn-rw@comcast.com...
> Then I will pursue the subject, as in the first time you use those lights
> the glare will be so bad off the shiny hood that you will (a) never use
them
> again, and hence they would only have value as bling, or (b) be forced to
> spraypaint your hood flat black to eliminate the glare.
>
> "Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
> news:43d34040$0$31128$a82e2bb9@reader.athenanews.c om...
> > Leaving aside the question of why you would want to do this,
>
>

Earle Horton

Damn it, Matt! Spoiled the joke!

Earle

"Matt Macchiarolo" <matt@nospamplease.com> wrote in message
news:8sKdnVEGuPtDdk7eRVn-rw@comcast.com...
> Then I will pursue the subject, as in the first time you use those lights
> the glare will be so bad off the shiny hood that you will (a) never use
them
> again, and hence they would only have value as bling, or (b) be forced to
> spraypaint your hood flat black to eliminate the glare.
>
> "Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
> news:43d34040$0$31128$a82e2bb9@reader.athenanews.c om...
> > Leaving aside the question of why you would want to do this,
>
>

Stupendous Man

If you merely wnat to look blingy and clueless without using them, go for
it. I installed the same setup for a guy and the glare is bad. The KC lights
"armored" cables weren't long enough to reach the horizontal cowl so i
drilled the wire hole thu it just below the windshield gasket.
Roof mounts are also kind of silly in the forest. I installed my Super
Oscars in the front behind the guard, where they belong.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty