Koenig winch
09-20-2007, 12:59 PM
#21
Guest
Posts: n/a
Re: Koenig winch
Randy wrote:
> I've got a Koenig winch ???????? don't know what the model or specs
> are on it. The only numbers I can find on it are; 524 and 49064. I
> believe this unit would be classified as a PTO winch since it
> currently driven by a hydraulic motor (oilfield application). I'm
> wondering if anyone has a book on this winch or can at least tell me
> what the specs are?
> One of the problems is that it turns extremely slowly and I think I
> can easily fix that by installing a small GPM hydraulic motor.
> I've tried contacting RKI but they were of no help what so ever. They
> agreed that they used to manufacture this winch but they would rather
> sell me a new unit than assist with some information on the original
> unit.
> Any assistance, direction to a web site or contact info would be
> appreciated.
>
That winch 'can' be driven off the PTO if you have such, otherwise it is
just a hydraulic winch. It might even have been made for Jeeps.
http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
I believe you are correct about the pump and speed, though speed isn't
always a good thing when winching....
If you had a PTO, then a hand throttle would control the winch speed.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> I've got a Koenig winch ???????? don't know what the model or specs
> are on it. The only numbers I can find on it are; 524 and 49064. I
> believe this unit would be classified as a PTO winch since it
> currently driven by a hydraulic motor (oilfield application). I'm
> wondering if anyone has a book on this winch or can at least tell me
> what the specs are?
> One of the problems is that it turns extremely slowly and I think I
> can easily fix that by installing a small GPM hydraulic motor.
> I've tried contacting RKI but they were of no help what so ever. They
> agreed that they used to manufacture this winch but they would rather
> sell me a new unit than assist with some information on the original
> unit.
> Any assistance, direction to a web site or contact info would be
> appreciated.
>
That winch 'can' be driven off the PTO if you have such, otherwise it is
just a hydraulic winch. It might even have been made for Jeeps.
http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
I believe you are correct about the pump and speed, though speed isn't
always a good thing when winching....
If you had a PTO, then a hand throttle would control the winch speed.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
09-21-2007, 05:27 AM
#22
Guest
Posts: n/a
Re: Koenig winch
On Sep 20, 11:59 pm, Mike Romain <roma...@sympatico.ca> wrote:
> Randy wrote:
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> That winch 'can' be driven off the PTO if you have such, otherwise it is
> just a hydraulic winch. It might even have been made for Jeeps.
>
> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>
> I believe you are correct about the pump and speed, though speed isn't
> always a good thing when winching....
>
> If you had a PTO, then a hand throttle would control the winch speed.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> (More Off Road album links at bottom of the view page)- Hide quoted text -
>
> - Show quoted text -
........... back to my original question......... can anyone identify
the model of this winch from the numbers 524 and 49064 and do you have
any information on it in regards to load rating, etc. Any assistance
with the subject would be appreciated rather than the criticism of how
I posted the query.
I use these groups to research and share information among other
enthusiasts........ not for social activity. Get a life.
> Randy wrote:
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> That winch 'can' be driven off the PTO if you have such, otherwise it is
> just a hydraulic winch. It might even have been made for Jeeps.
>
> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>
> I believe you are correct about the pump and speed, though speed isn't
> always a good thing when winching....
>
> If you had a PTO, then a hand throttle would control the winch speed.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> (More Off Road album links at bottom of the view page)- Hide quoted text -
>
> - Show quoted text -
........... back to my original question......... can anyone identify
the model of this winch from the numbers 524 and 49064 and do you have
any information on it in regards to load rating, etc. Any assistance
with the subject would be appreciated rather than the criticism of how
I posted the query.
I use these groups to research and share information among other
enthusiasts........ not for social activity. Get a life.
09-21-2007, 05:27 AM
#23
Guest
Posts: n/a
Re: Koenig winch
On Sep 20, 11:59 pm, Mike Romain <roma...@sympatico.ca> wrote:
> Randy wrote:
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> That winch 'can' be driven off the PTO if you have such, otherwise it is
> just a hydraulic winch. It might even have been made for Jeeps.
>
> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>
> I believe you are correct about the pump and speed, though speed isn't
> always a good thing when winching....
>
> If you had a PTO, then a hand throttle would control the winch speed.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> (More Off Road album links at bottom of the view page)- Hide quoted text -
>
> - Show quoted text -
........... back to my original question......... can anyone identify
the model of this winch from the numbers 524 and 49064 and do you have
any information on it in regards to load rating, etc. Any assistance
with the subject would be appreciated rather than the criticism of how
I posted the query.
I use these groups to research and share information among other
enthusiasts........ not for social activity. Get a life.
> Randy wrote:
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> That winch 'can' be driven off the PTO if you have such, otherwise it is
> just a hydraulic winch. It might even have been made for Jeeps.
>
> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>
> I believe you are correct about the pump and speed, though speed isn't
> always a good thing when winching....
>
> If you had a PTO, then a hand throttle would control the winch speed.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> (More Off Road album links at bottom of the view page)- Hide quoted text -
>
> - Show quoted text -
........... back to my original question......... can anyone identify
the model of this winch from the numbers 524 and 49064 and do you have
any information on it in regards to load rating, etc. Any assistance
with the subject would be appreciated rather than the criticism of how
I posted the query.
I use these groups to research and share information among other
enthusiasts........ not for social activity. Get a life.
09-21-2007, 05:27 AM
#24
Guest
Posts: n/a
Re: Koenig winch
On Sep 20, 11:59 pm, Mike Romain <roma...@sympatico.ca> wrote:
> Randy wrote:
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> That winch 'can' be driven off the PTO if you have such, otherwise it is
> just a hydraulic winch. It might even have been made for Jeeps.
>
> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>
> I believe you are correct about the pump and speed, though speed isn't
> always a good thing when winching....
>
> If you had a PTO, then a hand throttle would control the winch speed.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> (More Off Road album links at bottom of the view page)- Hide quoted text -
>
> - Show quoted text -
........... back to my original question......... can anyone identify
the model of this winch from the numbers 524 and 49064 and do you have
any information on it in regards to load rating, etc. Any assistance
with the subject would be appreciated rather than the criticism of how
I posted the query.
I use these groups to research and share information among other
enthusiasts........ not for social activity. Get a life.
> Randy wrote:
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> That winch 'can' be driven off the PTO if you have such, otherwise it is
> just a hydraulic winch. It might even have been made for Jeeps.
>
> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>
> I believe you are correct about the pump and speed, though speed isn't
> always a good thing when winching....
>
> If you had a PTO, then a hand throttle would control the winch speed.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> (More Off Road album links at bottom of the view page)- Hide quoted text -
>
> - Show quoted text -
........... back to my original question......... can anyone identify
the model of this winch from the numbers 524 and 49064 and do you have
any information on it in regards to load rating, etc. Any assistance
with the subject would be appreciated rather than the criticism of how
I posted the query.
I use these groups to research and share information among other
enthusiasts........ not for social activity. Get a life.
09-21-2007, 05:27 AM
#25
Guest
Posts: n/a
Re: Koenig winch
On Sep 20, 11:59 pm, Mike Romain <roma...@sympatico.ca> wrote:
> Randy wrote:
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> That winch 'can' be driven off the PTO if you have such, otherwise it is
> just a hydraulic winch. It might even have been made for Jeeps.
>
> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>
> I believe you are correct about the pump and speed, though speed isn't
> always a good thing when winching....
>
> If you had a PTO, then a hand throttle would control the winch speed.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> (More Off Road album links at bottom of the view page)- Hide quoted text -
>
> - Show quoted text -
........... back to my original question......... can anyone identify
the model of this winch from the numbers 524 and 49064 and do you have
any information on it in regards to load rating, etc. Any assistance
with the subject would be appreciated rather than the criticism of how
I posted the query.
I use these groups to research and share information among other
enthusiasts........ not for social activity. Get a life.
> Randy wrote:
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> That winch 'can' be driven off the PTO if you have such, otherwise it is
> just a hydraulic winch. It might even have been made for Jeeps.
>
> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>
> I believe you are correct about the pump and speed, though speed isn't
> always a good thing when winching....
>
> If you had a PTO, then a hand throttle would control the winch speed.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> (More Off Road album links at bottom of the view page)- Hide quoted text -
>
> - Show quoted text -
........... back to my original question......... can anyone identify
the model of this winch from the numbers 524 and 49064 and do you have
any information on it in regards to load rating, etc. Any assistance
with the subject would be appreciated rather than the criticism of how
I posted the query.
I use these groups to research and share information among other
enthusiasts........ not for social activity. Get a life.
09-21-2007, 09:28 AM
#26
Guest
Posts: n/a
Re: Koenig winch
Randy wrote:
> On Sep 20, 11:59 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> Randy wrote:
>>> I've got a Koenig winch ???????? don't know what the model or specs
>>> are on it. The only numbers I can find on it are; 524 and 49064. I
>>> believe this unit would be classified as a PTO winch since it
>>> currently driven by a hydraulic motor (oilfield application). I'm
>>> wondering if anyone has a book on this winch or can at least tell me
>>> what the specs are?
>>> One of the problems is that it turns extremely slowly and I think I
>>> can easily fix that by installing a small GPM hydraulic motor.
>>> I've tried contacting RKI but they were of no help what so ever. They
>>> agreed that they used to manufacture this winch but they would rather
>>> sell me a new unit than assist with some information on the original
>>> unit.
>>> Any assistance, direction to a web site or contact info would be
>>> appreciated.
>> That winch 'can' be driven off the PTO if you have such, otherwise it is
>> just a hydraulic winch. It might even have been made for Jeeps.
>>
>> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>>
>> I believe you are correct about the pump and speed, though speed isn't
>> always a good thing when winching....
>>
>> If you had a PTO, then a hand throttle would control the winch speed.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)- Hide quoted text -
>>
>> - Show quoted text -
>
> .......... back to my original question......... can anyone identify
> the model of this winch from the numbers 524 and 49064 and do you have
> any information on it in regards to load rating, etc. Any assistance
> with the subject would be appreciated rather than the criticism of how
> I posted the query.
> I use these groups to research and share information among other
> enthusiasts........ not for social activity. Get a life.
>
Well, seeing as I actually found out that info and was going to post it
this morning for you until you decided to rant on me for no apparent
reason, you can freakin' well look it up yourself.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> On Sep 20, 11:59 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> Randy wrote:
>>> I've got a Koenig winch ???????? don't know what the model or specs
>>> are on it. The only numbers I can find on it are; 524 and 49064. I
>>> believe this unit would be classified as a PTO winch since it
>>> currently driven by a hydraulic motor (oilfield application). I'm
>>> wondering if anyone has a book on this winch or can at least tell me
>>> what the specs are?
>>> One of the problems is that it turns extremely slowly and I think I
>>> can easily fix that by installing a small GPM hydraulic motor.
>>> I've tried contacting RKI but they were of no help what so ever. They
>>> agreed that they used to manufacture this winch but they would rather
>>> sell me a new unit than assist with some information on the original
>>> unit.
>>> Any assistance, direction to a web site or contact info would be
>>> appreciated.
>> That winch 'can' be driven off the PTO if you have such, otherwise it is
>> just a hydraulic winch. It might even have been made for Jeeps.
>>
>> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>>
>> I believe you are correct about the pump and speed, though speed isn't
>> always a good thing when winching....
>>
>> If you had a PTO, then a hand throttle would control the winch speed.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)- Hide quoted text -
>>
>> - Show quoted text -
>
> .......... back to my original question......... can anyone identify
> the model of this winch from the numbers 524 and 49064 and do you have
> any information on it in regards to load rating, etc. Any assistance
> with the subject would be appreciated rather than the criticism of how
> I posted the query.
> I use these groups to research and share information among other
> enthusiasts........ not for social activity. Get a life.
>
Well, seeing as I actually found out that info and was going to post it
this morning for you until you decided to rant on me for no apparent
reason, you can freakin' well look it up yourself.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
09-21-2007, 09:28 AM
#27
Guest
Posts: n/a
Re: Koenig winch
Randy wrote:
> On Sep 20, 11:59 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> Randy wrote:
>>> I've got a Koenig winch ???????? don't know what the model or specs
>>> are on it. The only numbers I can find on it are; 524 and 49064. I
>>> believe this unit would be classified as a PTO winch since it
>>> currently driven by a hydraulic motor (oilfield application). I'm
>>> wondering if anyone has a book on this winch or can at least tell me
>>> what the specs are?
>>> One of the problems is that it turns extremely slowly and I think I
>>> can easily fix that by installing a small GPM hydraulic motor.
>>> I've tried contacting RKI but they were of no help what so ever. They
>>> agreed that they used to manufacture this winch but they would rather
>>> sell me a new unit than assist with some information on the original
>>> unit.
>>> Any assistance, direction to a web site or contact info would be
>>> appreciated.
>> That winch 'can' be driven off the PTO if you have such, otherwise it is
>> just a hydraulic winch. It might even have been made for Jeeps.
>>
>> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>>
>> I believe you are correct about the pump and speed, though speed isn't
>> always a good thing when winching....
>>
>> If you had a PTO, then a hand throttle would control the winch speed.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)- Hide quoted text -
>>
>> - Show quoted text -
>
> .......... back to my original question......... can anyone identify
> the model of this winch from the numbers 524 and 49064 and do you have
> any information on it in regards to load rating, etc. Any assistance
> with the subject would be appreciated rather than the criticism of how
> I posted the query.
> I use these groups to research and share information among other
> enthusiasts........ not for social activity. Get a life.
>
Well, seeing as I actually found out that info and was going to post it
this morning for you until you decided to rant on me for no apparent
reason, you can freakin' well look it up yourself.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> On Sep 20, 11:59 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> Randy wrote:
>>> I've got a Koenig winch ???????? don't know what the model or specs
>>> are on it. The only numbers I can find on it are; 524 and 49064. I
>>> believe this unit would be classified as a PTO winch since it
>>> currently driven by a hydraulic motor (oilfield application). I'm
>>> wondering if anyone has a book on this winch or can at least tell me
>>> what the specs are?
>>> One of the problems is that it turns extremely slowly and I think I
>>> can easily fix that by installing a small GPM hydraulic motor.
>>> I've tried contacting RKI but they were of no help what so ever. They
>>> agreed that they used to manufacture this winch but they would rather
>>> sell me a new unit than assist with some information on the original
>>> unit.
>>> Any assistance, direction to a web site or contact info would be
>>> appreciated.
>> That winch 'can' be driven off the PTO if you have such, otherwise it is
>> just a hydraulic winch. It might even have been made for Jeeps.
>>
>> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>>
>> I believe you are correct about the pump and speed, though speed isn't
>> always a good thing when winching....
>>
>> If you had a PTO, then a hand throttle would control the winch speed.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)- Hide quoted text -
>>
>> - Show quoted text -
>
> .......... back to my original question......... can anyone identify
> the model of this winch from the numbers 524 and 49064 and do you have
> any information on it in regards to load rating, etc. Any assistance
> with the subject would be appreciated rather than the criticism of how
> I posted the query.
> I use these groups to research and share information among other
> enthusiasts........ not for social activity. Get a life.
>
Well, seeing as I actually found out that info and was going to post it
this morning for you until you decided to rant on me for no apparent
reason, you can freakin' well look it up yourself.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
09-21-2007, 09:28 AM
#28
Guest
Posts: n/a
Re: Koenig winch
Randy wrote:
> On Sep 20, 11:59 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> Randy wrote:
>>> I've got a Koenig winch ???????? don't know what the model or specs
>>> are on it. The only numbers I can find on it are; 524 and 49064. I
>>> believe this unit would be classified as a PTO winch since it
>>> currently driven by a hydraulic motor (oilfield application). I'm
>>> wondering if anyone has a book on this winch or can at least tell me
>>> what the specs are?
>>> One of the problems is that it turns extremely slowly and I think I
>>> can easily fix that by installing a small GPM hydraulic motor.
>>> I've tried contacting RKI but they were of no help what so ever. They
>>> agreed that they used to manufacture this winch but they would rather
>>> sell me a new unit than assist with some information on the original
>>> unit.
>>> Any assistance, direction to a web site or contact info would be
>>> appreciated.
>> That winch 'can' be driven off the PTO if you have such, otherwise it is
>> just a hydraulic winch. It might even have been made for Jeeps.
>>
>> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>>
>> I believe you are correct about the pump and speed, though speed isn't
>> always a good thing when winching....
>>
>> If you had a PTO, then a hand throttle would control the winch speed.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)- Hide quoted text -
>>
>> - Show quoted text -
>
> .......... back to my original question......... can anyone identify
> the model of this winch from the numbers 524 and 49064 and do you have
> any information on it in regards to load rating, etc. Any assistance
> with the subject would be appreciated rather than the criticism of how
> I posted the query.
> I use these groups to research and share information among other
> enthusiasts........ not for social activity. Get a life.
>
Well, seeing as I actually found out that info and was going to post it
this morning for you until you decided to rant on me for no apparent
reason, you can freakin' well look it up yourself.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> On Sep 20, 11:59 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> Randy wrote:
>>> I've got a Koenig winch ???????? don't know what the model or specs
>>> are on it. The only numbers I can find on it are; 524 and 49064. I
>>> believe this unit would be classified as a PTO winch since it
>>> currently driven by a hydraulic motor (oilfield application). I'm
>>> wondering if anyone has a book on this winch or can at least tell me
>>> what the specs are?
>>> One of the problems is that it turns extremely slowly and I think I
>>> can easily fix that by installing a small GPM hydraulic motor.
>>> I've tried contacting RKI but they were of no help what so ever. They
>>> agreed that they used to manufacture this winch but they would rather
>>> sell me a new unit than assist with some information on the original
>>> unit.
>>> Any assistance, direction to a web site or contact info would be
>>> appreciated.
>> That winch 'can' be driven off the PTO if you have such, otherwise it is
>> just a hydraulic winch. It might even have been made for Jeeps.
>>
>> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>>
>> I believe you are correct about the pump and speed, though speed isn't
>> always a good thing when winching....
>>
>> If you had a PTO, then a hand throttle would control the winch speed.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)- Hide quoted text -
>>
>> - Show quoted text -
>
> .......... back to my original question......... can anyone identify
> the model of this winch from the numbers 524 and 49064 and do you have
> any information on it in regards to load rating, etc. Any assistance
> with the subject would be appreciated rather than the criticism of how
> I posted the query.
> I use these groups to research and share information among other
> enthusiasts........ not for social activity. Get a life.
>
Well, seeing as I actually found out that info and was going to post it
this morning for you until you decided to rant on me for no apparent
reason, you can freakin' well look it up yourself.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
09-21-2007, 09:28 AM
#29
Guest
Posts: n/a
Re: Koenig winch
Randy wrote:
> On Sep 20, 11:59 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> Randy wrote:
>>> I've got a Koenig winch ???????? don't know what the model or specs
>>> are on it. The only numbers I can find on it are; 524 and 49064. I
>>> believe this unit would be classified as a PTO winch since it
>>> currently driven by a hydraulic motor (oilfield application). I'm
>>> wondering if anyone has a book on this winch or can at least tell me
>>> what the specs are?
>>> One of the problems is that it turns extremely slowly and I think I
>>> can easily fix that by installing a small GPM hydraulic motor.
>>> I've tried contacting RKI but they were of no help what so ever. They
>>> agreed that they used to manufacture this winch but they would rather
>>> sell me a new unit than assist with some information on the original
>>> unit.
>>> Any assistance, direction to a web site or contact info would be
>>> appreciated.
>> That winch 'can' be driven off the PTO if you have such, otherwise it is
>> just a hydraulic winch. It might even have been made for Jeeps.
>>
>> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>>
>> I believe you are correct about the pump and speed, though speed isn't
>> always a good thing when winching....
>>
>> If you had a PTO, then a hand throttle would control the winch speed.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)- Hide quoted text -
>>
>> - Show quoted text -
>
> .......... back to my original question......... can anyone identify
> the model of this winch from the numbers 524 and 49064 and do you have
> any information on it in regards to load rating, etc. Any assistance
> with the subject would be appreciated rather than the criticism of how
> I posted the query.
> I use these groups to research and share information among other
> enthusiasts........ not for social activity. Get a life.
>
Well, seeing as I actually found out that info and was going to post it
this morning for you until you decided to rant on me for no apparent
reason, you can freakin' well look it up yourself.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> On Sep 20, 11:59 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> Randy wrote:
>>> I've got a Koenig winch ???????? don't know what the model or specs
>>> are on it. The only numbers I can find on it are; 524 and 49064. I
>>> believe this unit would be classified as a PTO winch since it
>>> currently driven by a hydraulic motor (oilfield application). I'm
>>> wondering if anyone has a book on this winch or can at least tell me
>>> what the specs are?
>>> One of the problems is that it turns extremely slowly and I think I
>>> can easily fix that by installing a small GPM hydraulic motor.
>>> I've tried contacting RKI but they were of no help what so ever. They
>>> agreed that they used to manufacture this winch but they would rather
>>> sell me a new unit than assist with some information on the original
>>> unit.
>>> Any assistance, direction to a web site or contact info would be
>>> appreciated.
>> That winch 'can' be driven off the PTO if you have such, otherwise it is
>> just a hydraulic winch. It might even have been made for Jeeps.
>>
>> http://www.film.queensu.ca/cj3B/Tech/KoenigWinch.html
>>
>> I believe you are correct about the pump and speed, though speed isn't
>> always a good thing when winching....
>>
>> If you had a PTO, then a hand throttle would control the winch speed.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)- Hide quoted text -
>>
>> - Show quoted text -
>
> .......... back to my original question......... can anyone identify
> the model of this winch from the numbers 524 and 49064 and do you have
> any information on it in regards to load rating, etc. Any assistance
> with the subject would be appreciated rather than the criticism of how
> I posted the query.
> I use these groups to research and share information among other
> enthusiasts........ not for social activity. Get a life.
>
Well, seeing as I actually found out that info and was going to post it
this morning for you until you decided to rant on me for no apparent
reason, you can freakin' well look it up yourself.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
09-21-2007, 02:56 PM
#30
Guest
Posts: n/a
Re: Koenig winch
Ah, enthusiasm in Jeeps isn't a social activity.
If you are after a professional service, pay your mechanic.
Dave Milne, Scotland
"Randy" <arwolkowski@shaw.ca> wrote in message
news:1190366830.921014.96410@i13g2000prf.googlegro ups.com...
> I use these groups to research and share information among other
> enthusiasts........ not for social activity. Get a life.
If you are after a professional service, pay your mechanic.
Dave Milne, Scotland
"Randy" <arwolkowski@shaw.ca> wrote in message
news:1190366830.921014.96410@i13g2000prf.googlegro ups.com...
> I use these groups to research and share information among other
> enthusiasts........ not for social activity. Get a life.