Koenig winch
09-20-2007, 01:37 AM
#1
Guest
Posts: n/a
Koenig winch
I've got a Koenig winch ???????? don't know what the model or specs
are on it. The only numbers I can find on it are; 524 and 49064. I
believe this unit would be classified as a PTO winch since it
currently driven by a hydraulic motor (oilfield application). I'm
wondering if anyone has a book on this winch or can at least tell me
what the specs are?
One of the problems is that it turns extremely slowly and I think I
can easily fix that by installing a small GPM hydraulic motor.
I've tried contacting RKI but they were of no help what so ever. They
agreed that they used to manufacture this winch but they would rather
sell me a new unit than assist with some information on the original
unit.
Any assistance, direction to a web site or contact info would be
appreciated.
are on it. The only numbers I can find on it are; 524 and 49064. I
believe this unit would be classified as a PTO winch since it
currently driven by a hydraulic motor (oilfield application). I'm
wondering if anyone has a book on this winch or can at least tell me
what the specs are?
One of the problems is that it turns extremely slowly and I think I
can easily fix that by installing a small GPM hydraulic motor.
I've tried contacting RKI but they were of no help what so ever. They
agreed that they used to manufacture this winch but they would rather
sell me a new unit than assist with some information on the original
unit.
Any assistance, direction to a web site or contact info would be
appreciated.
09-20-2007, 02:40 AM
#2
Guest
Posts: n/a
Re: Koenig winch
Does it separate from the motor to look like the old Koenig winch use
with Power Take Offs:
http://www.film.queensu.ca/cj3B/Phot...WinchMount.gif
?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Randy" <arwolkowski@shaw.ca> wrote in message
news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
> I've got a Koenig winch ???????? don't know what the model or specs
> are on it. The only numbers I can find on it are; 524 and 49064. I
> believe this unit would be classified as a PTO winch since it
> currently driven by a hydraulic motor (oilfield application). I'm
> wondering if anyone has a book on this winch or can at least tell me
> what the specs are?
> One of the problems is that it turns extremely slowly and I think I
> can easily fix that by installing a small GPM hydraulic motor.
> I've tried contacting RKI but they were of no help what so ever. They
> agreed that they used to manufacture this winch but they would rather
> sell me a new unit than assist with some information on the original
> unit.
> Any assistance, direction to a web site or contact info would be
> appreciated.
>
--
Posted via a free Usenet account from http://www.teranews.com
with Power Take Offs:
http://www.film.queensu.ca/cj3B/Phot...WinchMount.gif
?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Randy" <arwolkowski@shaw.ca> wrote in message
news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
> I've got a Koenig winch ???????? don't know what the model or specs
> are on it. The only numbers I can find on it are; 524 and 49064. I
> believe this unit would be classified as a PTO winch since it
> currently driven by a hydraulic motor (oilfield application). I'm
> wondering if anyone has a book on this winch or can at least tell me
> what the specs are?
> One of the problems is that it turns extremely slowly and I think I
> can easily fix that by installing a small GPM hydraulic motor.
> I've tried contacting RKI but they were of no help what so ever. They
> agreed that they used to manufacture this winch but they would rather
> sell me a new unit than assist with some information on the original
> unit.
> Any assistance, direction to a web site or contact info would be
> appreciated.
>
--
Posted via a free Usenet account from http://www.teranews.com
09-20-2007, 02:40 AM
#3
Guest
Posts: n/a
Re: Koenig winch
Does it separate from the motor to look like the old Koenig winch use
with Power Take Offs:
http://www.film.queensu.ca/cj3B/Phot...WinchMount.gif
?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Randy" <arwolkowski@shaw.ca> wrote in message
news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
> I've got a Koenig winch ???????? don't know what the model or specs
> are on it. The only numbers I can find on it are; 524 and 49064. I
> believe this unit would be classified as a PTO winch since it
> currently driven by a hydraulic motor (oilfield application). I'm
> wondering if anyone has a book on this winch or can at least tell me
> what the specs are?
> One of the problems is that it turns extremely slowly and I think I
> can easily fix that by installing a small GPM hydraulic motor.
> I've tried contacting RKI but they were of no help what so ever. They
> agreed that they used to manufacture this winch but they would rather
> sell me a new unit than assist with some information on the original
> unit.
> Any assistance, direction to a web site or contact info would be
> appreciated.
>
--
Posted via a free Usenet account from http://www.teranews.com
with Power Take Offs:
http://www.film.queensu.ca/cj3B/Phot...WinchMount.gif
?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Randy" <arwolkowski@shaw.ca> wrote in message
news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
> I've got a Koenig winch ???????? don't know what the model or specs
> are on it. The only numbers I can find on it are; 524 and 49064. I
> believe this unit would be classified as a PTO winch since it
> currently driven by a hydraulic motor (oilfield application). I'm
> wondering if anyone has a book on this winch or can at least tell me
> what the specs are?
> One of the problems is that it turns extremely slowly and I think I
> can easily fix that by installing a small GPM hydraulic motor.
> I've tried contacting RKI but they were of no help what so ever. They
> agreed that they used to manufacture this winch but they would rather
> sell me a new unit than assist with some information on the original
> unit.
> Any assistance, direction to a web site or contact info would be
> appreciated.
>
--
Posted via a free Usenet account from http://www.teranews.com
09-20-2007, 02:40 AM
#4
Guest
Posts: n/a
Re: Koenig winch
Does it separate from the motor to look like the old Koenig winch use
with Power Take Offs:
http://www.film.queensu.ca/cj3B/Phot...WinchMount.gif
?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Randy" <arwolkowski@shaw.ca> wrote in message
news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
> I've got a Koenig winch ???????? don't know what the model or specs
> are on it. The only numbers I can find on it are; 524 and 49064. I
> believe this unit would be classified as a PTO winch since it
> currently driven by a hydraulic motor (oilfield application). I'm
> wondering if anyone has a book on this winch or can at least tell me
> what the specs are?
> One of the problems is that it turns extremely slowly and I think I
> can easily fix that by installing a small GPM hydraulic motor.
> I've tried contacting RKI but they were of no help what so ever. They
> agreed that they used to manufacture this winch but they would rather
> sell me a new unit than assist with some information on the original
> unit.
> Any assistance, direction to a web site or contact info would be
> appreciated.
>
--
Posted via a free Usenet account from http://www.teranews.com
with Power Take Offs:
http://www.film.queensu.ca/cj3B/Phot...WinchMount.gif
?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Randy" <arwolkowski@shaw.ca> wrote in message
news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
> I've got a Koenig winch ???????? don't know what the model or specs
> are on it. The only numbers I can find on it are; 524 and 49064. I
> believe this unit would be classified as a PTO winch since it
> currently driven by a hydraulic motor (oilfield application). I'm
> wondering if anyone has a book on this winch or can at least tell me
> what the specs are?
> One of the problems is that it turns extremely slowly and I think I
> can easily fix that by installing a small GPM hydraulic motor.
> I've tried contacting RKI but they were of no help what so ever. They
> agreed that they used to manufacture this winch but they would rather
> sell me a new unit than assist with some information on the original
> unit.
> Any assistance, direction to a web site or contact info would be
> appreciated.
>
--
Posted via a free Usenet account from http://www.teranews.com
09-20-2007, 02:40 AM
#5
Guest
Posts: n/a
Re: Koenig winch
Does it separate from the motor to look like the old Koenig winch use
with Power Take Offs:
http://www.film.queensu.ca/cj3B/Phot...WinchMount.gif
?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Randy" <arwolkowski@shaw.ca> wrote in message
news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
> I've got a Koenig winch ???????? don't know what the model or specs
> are on it. The only numbers I can find on it are; 524 and 49064. I
> believe this unit would be classified as a PTO winch since it
> currently driven by a hydraulic motor (oilfield application). I'm
> wondering if anyone has a book on this winch or can at least tell me
> what the specs are?
> One of the problems is that it turns extremely slowly and I think I
> can easily fix that by installing a small GPM hydraulic motor.
> I've tried contacting RKI but they were of no help what so ever. They
> agreed that they used to manufacture this winch but they would rather
> sell me a new unit than assist with some information on the original
> unit.
> Any assistance, direction to a web site or contact info would be
> appreciated.
>
--
Posted via a free Usenet account from http://www.teranews.com
with Power Take Offs:
http://www.film.queensu.ca/cj3B/Phot...WinchMount.gif
?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Randy" <arwolkowski@shaw.ca> wrote in message
news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
> I've got a Koenig winch ???????? don't know what the model or specs
> are on it. The only numbers I can find on it are; 524 and 49064. I
> believe this unit would be classified as a PTO winch since it
> currently driven by a hydraulic motor (oilfield application). I'm
> wondering if anyone has a book on this winch or can at least tell me
> what the specs are?
> One of the problems is that it turns extremely slowly and I think I
> can easily fix that by installing a small GPM hydraulic motor.
> I've tried contacting RKI but they were of no help what so ever. They
> agreed that they used to manufacture this winch but they would rather
> sell me a new unit than assist with some information on the original
> unit.
> Any assistance, direction to a web site or contact info would be
> appreciated.
>
--
Posted via a free Usenet account from http://www.teranews.com
09-20-2007, 04:42 AM
#6
Guest
Posts: n/a
Re: Koenig winch
On Sep 20, 1:40 pm, "L.W. \(Bill\) ------ III"
<LWBillHug...@------.net> wrote:
> Does it separate from the motor to look like the old Koenig winch use
> with Power Take Offs:http://www.film.queensu.ca/cj3B/Phot.../HHKoenigWinch...
> ?
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> "Randy" <arwolkow...@shaw.ca> wrote in message
>
> news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
>
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
It looks like a similar design as in your photo except there is an
adapter spool that bolts onto the bottom of the drive end. This is
where the hydraulic motor is bolted and coupled to the winch. I would
like to attach a photo but I don't know how!!!
<LWBillHug...@------.net> wrote:
> Does it separate from the motor to look like the old Koenig winch use
> with Power Take Offs:http://www.film.queensu.ca/cj3B/Phot.../HHKoenigWinch...
> ?
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> "Randy" <arwolkow...@shaw.ca> wrote in message
>
> news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
>
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
It looks like a similar design as in your photo except there is an
adapter spool that bolts onto the bottom of the drive end. This is
where the hydraulic motor is bolted and coupled to the winch. I would
like to attach a photo but I don't know how!!!
09-20-2007, 04:42 AM
#7
Guest
Posts: n/a
Re: Koenig winch
On Sep 20, 1:40 pm, "L.W. \(Bill\) ------ III"
<LWBillHug...@------.net> wrote:
> Does it separate from the motor to look like the old Koenig winch use
> with Power Take Offs:http://www.film.queensu.ca/cj3B/Phot.../HHKoenigWinch...
> ?
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> "Randy" <arwolkow...@shaw.ca> wrote in message
>
> news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
>
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
It looks like a similar design as in your photo except there is an
adapter spool that bolts onto the bottom of the drive end. This is
where the hydraulic motor is bolted and coupled to the winch. I would
like to attach a photo but I don't know how!!!
<LWBillHug...@------.net> wrote:
> Does it separate from the motor to look like the old Koenig winch use
> with Power Take Offs:http://www.film.queensu.ca/cj3B/Phot.../HHKoenigWinch...
> ?
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> "Randy" <arwolkow...@shaw.ca> wrote in message
>
> news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
>
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
It looks like a similar design as in your photo except there is an
adapter spool that bolts onto the bottom of the drive end. This is
where the hydraulic motor is bolted and coupled to the winch. I would
like to attach a photo but I don't know how!!!
09-20-2007, 04:42 AM
#8
Guest
Posts: n/a
Re: Koenig winch
On Sep 20, 1:40 pm, "L.W. \(Bill\) ------ III"
<LWBillHug...@------.net> wrote:
> Does it separate from the motor to look like the old Koenig winch use
> with Power Take Offs:http://www.film.queensu.ca/cj3B/Phot.../HHKoenigWinch...
> ?
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> "Randy" <arwolkow...@shaw.ca> wrote in message
>
> news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
>
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
It looks like a similar design as in your photo except there is an
adapter spool that bolts onto the bottom of the drive end. This is
where the hydraulic motor is bolted and coupled to the winch. I would
like to attach a photo but I don't know how!!!
<LWBillHug...@------.net> wrote:
> Does it separate from the motor to look like the old Koenig winch use
> with Power Take Offs:http://www.film.queensu.ca/cj3B/Phot.../HHKoenigWinch...
> ?
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> "Randy" <arwolkow...@shaw.ca> wrote in message
>
> news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
>
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
It looks like a similar design as in your photo except there is an
adapter spool that bolts onto the bottom of the drive end. This is
where the hydraulic motor is bolted and coupled to the winch. I would
like to attach a photo but I don't know how!!!
09-20-2007, 04:42 AM
#9
Guest
Posts: n/a
Re: Koenig winch
On Sep 20, 1:40 pm, "L.W. \(Bill\) ------ III"
<LWBillHug...@------.net> wrote:
> Does it separate from the motor to look like the old Koenig winch use
> with Power Take Offs:http://www.film.queensu.ca/cj3B/Phot.../HHKoenigWinch...
> ?
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> "Randy" <arwolkow...@shaw.ca> wrote in message
>
> news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
>
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
It looks like a similar design as in your photo except there is an
adapter spool that bolts onto the bottom of the drive end. This is
where the hydraulic motor is bolted and coupled to the winch. I would
like to attach a photo but I don't know how!!!
<LWBillHug...@------.net> wrote:
> Does it separate from the motor to look like the old Koenig winch use
> with Power Take Offs:http://www.film.queensu.ca/cj3B/Phot.../HHKoenigWinch...
> ?
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> "Randy" <arwolkow...@shaw.ca> wrote in message
>
> news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
>
> > I've got a Koenig winch ???????? don't know what the model or specs
> > are on it. The only numbers I can find on it are; 524 and 49064. I
> > believe this unit would be classified as a PTO winch since it
> > currently driven by a hydraulic motor (oilfield application). I'm
> > wondering if anyone has a book on this winch or can at least tell me
> > what the specs are?
> > One of the problems is that it turns extremely slowly and I think I
> > can easily fix that by installing a small GPM hydraulic motor.
> > I've tried contacting RKI but they were of no help what so ever. They
> > agreed that they used to manufacture this winch but they would rather
> > sell me a new unit than assist with some information on the original
> > unit.
> > Any assistance, direction to a web site or contact info would be
> > appreciated.
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
It looks like a similar design as in your photo except there is an
adapter spool that bolts onto the bottom of the drive end. This is
where the hydraulic motor is bolted and coupled to the winch. I would
like to attach a photo but I don't know how!!!
09-20-2007, 11:40 AM
#10
Guest
Posts: n/a
Re: Koenig winch
It is not a PTO. PTO means Power Take Off, and this power source is a
mechanical connection to the drive train via the transfer case. Your winch
is a hydraulic winch. It runs by hydraulic means via a pump that is driven
by a motor. The pump could be a PTO design, but typically is simply
connected to the crankshaft by a belt.
In an automotive application -- such as your Jeep -- a hydraulic winch is
often run by the power steering pump.
The beauty of a hydraulic winch over an electric one is that it can run
pretty much forever without stopping, wheras an electric winch needs to rest
frequently because it gets hot. The downside of the hydraulic winch is that
if it is your own Jeep that needs to be recovered, the engine must be able
to run for the winch to work. As a practical matter, the recovery operation
while offroading is usually far shorter than the duty cycle of the winch --
you can get the vehicle back on its wheels long before the winch gets hot
and needs to rest. An electric winch is well suited for self recovery
because it can work even if the vehicle is belly up, and the engine will not
run.
"Randy" <arwolkowski@shaw.ca> wrote in message
news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
> I've got a Koenig winch ???????? don't know what the model or specs
> are on it. The only numbers I can find on it are; 524 and 49064. I
> believe this unit would be classified as a PTO winch since it
> currently driven by a hydraulic motor (oilfield application). I'm
> wondering if anyone has a book on this winch or can at least tell me
> what the specs are?
> One of the problems is that it turns extremely slowly and I think I
> can easily fix that by installing a small GPM hydraulic motor.
> I've tried contacting RKI but they were of no help what so ever. They
> agreed that they used to manufacture this winch but they would rather
> sell me a new unit than assist with some information on the original
> unit.
> Any assistance, direction to a web site or contact info would be
> appreciated.
>
mechanical connection to the drive train via the transfer case. Your winch
is a hydraulic winch. It runs by hydraulic means via a pump that is driven
by a motor. The pump could be a PTO design, but typically is simply
connected to the crankshaft by a belt.
In an automotive application -- such as your Jeep -- a hydraulic winch is
often run by the power steering pump.
The beauty of a hydraulic winch over an electric one is that it can run
pretty much forever without stopping, wheras an electric winch needs to rest
frequently because it gets hot. The downside of the hydraulic winch is that
if it is your own Jeep that needs to be recovered, the engine must be able
to run for the winch to work. As a practical matter, the recovery operation
while offroading is usually far shorter than the duty cycle of the winch --
you can get the vehicle back on its wheels long before the winch gets hot
and needs to rest. An electric winch is well suited for self recovery
because it can work even if the vehicle is belly up, and the engine will not
run.
"Randy" <arwolkowski@shaw.ca> wrote in message
news:1190266640.810206.319480@e9g2000prf.googlegro ups.com...
> I've got a Koenig winch ???????? don't know what the model or specs
> are on it. The only numbers I can find on it are; 524 and 49064. I
> believe this unit would be classified as a PTO winch since it
> currently driven by a hydraulic motor (oilfield application). I'm
> wondering if anyone has a book on this winch or can at least tell me
> what the specs are?
> One of the problems is that it turns extremely slowly and I think I
> can easily fix that by installing a small GPM hydraulic motor.
> I've tried contacting RKI but they were of no help what so ever. They
> agreed that they used to manufacture this winch but they would rather
> sell me a new unit than assist with some information on the original
> unit.
> Any assistance, direction to a web site or contact info would be
> appreciated.
>
