Killed another engine mount....
07-11-2005, 12:16 PM
#1
Guest
Posts: n/a
Killed another engine mount....
Damn, but it is hard to bitch about having too much traction....
My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
engine mounts, wheel locking hubs and u-joints.
I blew a hub earlier this spring and just found two new bolts snapped
off in it so I have to pull it and try to get the stubs out.
Then the muffler shop was crying about a bad engine mount so I looked
and sure enough I had just shattered the sucker.
I didn't tear the metal off the rubber pad, I shattered the metal!
I have lost count, but I think that is the 4th or 5th blown mount over 5
or 6 years.
Oh well, 'you play you pay' as they say and we sure had/have fun
breaking it....
:-)
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
engine mounts, wheel locking hubs and u-joints.
I blew a hub earlier this spring and just found two new bolts snapped
off in it so I have to pull it and try to get the stubs out.
Then the muffler shop was crying about a bad engine mount so I looked
and sure enough I had just shattered the sucker.
I didn't tear the metal off the rubber pad, I shattered the metal!
I have lost count, but I think that is the 4th or 5th blown mount over 5
or 6 years.
Oh well, 'you play you pay' as they say and we sure had/have fun
breaking it....
:-)
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
07-11-2005, 04:17 PM
#2
Guest
Posts: n/a
Re: Killed another engine mount....
These are stock mounts, yes? Does M.O.R.E. or anyone else make something for
your CJ that might not break?
n.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42D29B65.8141EDDE@sympatico.ca...
> Damn, but it is hard to bitch about having too much traction....
>
> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
> engine mounts, wheel locking hubs and u-joints.
>
> I blew a hub earlier this spring and just found two new bolts snapped
> off in it so I have to pull it and try to get the stubs out.
>
> Then the muffler shop was crying about a bad engine mount so I looked
> and sure enough I had just shattered the sucker.
>
> I didn't tear the metal off the rubber pad, I shattered the metal!
>
> I have lost count, but I think that is the 4th or 5th blown mount over 5
> or 6 years.
>
> Oh well, 'you play you pay' as they say and we sure had/have fun
> breaking it....
>
> :-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
your CJ that might not break?
n.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42D29B65.8141EDDE@sympatico.ca...
> Damn, but it is hard to bitch about having too much traction....
>
> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
> engine mounts, wheel locking hubs and u-joints.
>
> I blew a hub earlier this spring and just found two new bolts snapped
> off in it so I have to pull it and try to get the stubs out.
>
> Then the muffler shop was crying about a bad engine mount so I looked
> and sure enough I had just shattered the sucker.
>
> I didn't tear the metal off the rubber pad, I shattered the metal!
>
> I have lost count, but I think that is the 4th or 5th blown mount over 5
> or 6 years.
>
> Oh well, 'you play you pay' as they say and we sure had/have fun
> breaking it....
>
> :-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
07-11-2005, 04:17 PM
#3
Guest
Posts: n/a
Re: Killed another engine mount....
These are stock mounts, yes? Does M.O.R.E. or anyone else make something for
your CJ that might not break?
n.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42D29B65.8141EDDE@sympatico.ca...
> Damn, but it is hard to bitch about having too much traction....
>
> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
> engine mounts, wheel locking hubs and u-joints.
>
> I blew a hub earlier this spring and just found two new bolts snapped
> off in it so I have to pull it and try to get the stubs out.
>
> Then the muffler shop was crying about a bad engine mount so I looked
> and sure enough I had just shattered the sucker.
>
> I didn't tear the metal off the rubber pad, I shattered the metal!
>
> I have lost count, but I think that is the 4th or 5th blown mount over 5
> or 6 years.
>
> Oh well, 'you play you pay' as they say and we sure had/have fun
> breaking it....
>
> :-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
your CJ that might not break?
n.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42D29B65.8141EDDE@sympatico.ca...
> Damn, but it is hard to bitch about having too much traction....
>
> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
> engine mounts, wheel locking hubs and u-joints.
>
> I blew a hub earlier this spring and just found two new bolts snapped
> off in it so I have to pull it and try to get the stubs out.
>
> Then the muffler shop was crying about a bad engine mount so I looked
> and sure enough I had just shattered the sucker.
>
> I didn't tear the metal off the rubber pad, I shattered the metal!
>
> I have lost count, but I think that is the 4th or 5th blown mount over 5
> or 6 years.
>
> Oh well, 'you play you pay' as they say and we sure had/have fun
> breaking it....
>
> :-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
07-11-2005, 04:17 PM
#4
Guest
Posts: n/a
Re: Killed another engine mount....
These are stock mounts, yes? Does M.O.R.E. or anyone else make something for
your CJ that might not break?
n.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42D29B65.8141EDDE@sympatico.ca...
> Damn, but it is hard to bitch about having too much traction....
>
> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
> engine mounts, wheel locking hubs and u-joints.
>
> I blew a hub earlier this spring and just found two new bolts snapped
> off in it so I have to pull it and try to get the stubs out.
>
> Then the muffler shop was crying about a bad engine mount so I looked
> and sure enough I had just shattered the sucker.
>
> I didn't tear the metal off the rubber pad, I shattered the metal!
>
> I have lost count, but I think that is the 4th or 5th blown mount over 5
> or 6 years.
>
> Oh well, 'you play you pay' as they say and we sure had/have fun
> breaking it....
>
> :-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
your CJ that might not break?
n.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42D29B65.8141EDDE@sympatico.ca...
> Damn, but it is hard to bitch about having too much traction....
>
> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
> engine mounts, wheel locking hubs and u-joints.
>
> I blew a hub earlier this spring and just found two new bolts snapped
> off in it so I have to pull it and try to get the stubs out.
>
> Then the muffler shop was crying about a bad engine mount so I looked
> and sure enough I had just shattered the sucker.
>
> I didn't tear the metal off the rubber pad, I shattered the metal!
>
> I have lost count, but I think that is the 4th or 5th blown mount over 5
> or 6 years.
>
> Oh well, 'you play you pay' as they say and we sure had/have fun
> breaking it....
>
> :-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
07-11-2005, 04:17 PM
#5
Guest
Posts: n/a
Re: Killed another engine mount....
These are stock mounts, yes? Does M.O.R.E. or anyone else make something for
your CJ that might not break?
n.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42D29B65.8141EDDE@sympatico.ca...
> Damn, but it is hard to bitch about having too much traction....
>
> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
> engine mounts, wheel locking hubs and u-joints.
>
> I blew a hub earlier this spring and just found two new bolts snapped
> off in it so I have to pull it and try to get the stubs out.
>
> Then the muffler shop was crying about a bad engine mount so I looked
> and sure enough I had just shattered the sucker.
>
> I didn't tear the metal off the rubber pad, I shattered the metal!
>
> I have lost count, but I think that is the 4th or 5th blown mount over 5
> or 6 years.
>
> Oh well, 'you play you pay' as they say and we sure had/have fun
> breaking it....
>
> :-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
your CJ that might not break?
n.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42D29B65.8141EDDE@sympatico.ca...
> Damn, but it is hard to bitch about having too much traction....
>
> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
> engine mounts, wheel locking hubs and u-joints.
>
> I blew a hub earlier this spring and just found two new bolts snapped
> off in it so I have to pull it and try to get the stubs out.
>
> Then the muffler shop was crying about a bad engine mount so I looked
> and sure enough I had just shattered the sucker.
>
> I didn't tear the metal off the rubber pad, I shattered the metal!
>
> I have lost count, but I think that is the 4th or 5th blown mount over 5
> or 6 years.
>
> Oh well, 'you play you pay' as they say and we sure had/have fun
> breaking it....
>
> :-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
07-11-2005, 05:00 PM
#6
Guest
Posts: n/a
Re: Killed another engine mount....
Yeah they do.
http://www.mountainoffroad.com/catal.../bombproof.htm
But strengthen your motor mounts and what breaks next? Hopefully a u-joint.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:HtAAe.44$7N3.13412@news.uswest.net...
> These are stock mounts, yes? Does M.O.R.E. or anyone else make something
> for your CJ that might not break?
> n.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:42D29B65.8141EDDE@sympatico.ca...
>> Damn, but it is hard to bitch about having too much traction....
>>
>> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
>> engine mounts, wheel locking hubs and u-joints.
>>
>> I blew a hub earlier this spring and just found two new bolts snapped
>> off in it so I have to pull it and try to get the stubs out.
>>
>> Then the muffler shop was crying about a bad engine mount so I looked
>> and sure enough I had just shattered the sucker.
>>
>> I didn't tear the metal off the rubber pad, I shattered the metal!
>>
>> I have lost count, but I think that is the 4th or 5th blown mount over 5
>> or 6 years.
>>
>> Oh well, 'you play you pay' as they say and we sure had/have fun
>> breaking it....
>>
>> :-)
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>
>
http://www.mountainoffroad.com/catal.../bombproof.htm
But strengthen your motor mounts and what breaks next? Hopefully a u-joint.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:HtAAe.44$7N3.13412@news.uswest.net...
> These are stock mounts, yes? Does M.O.R.E. or anyone else make something
> for your CJ that might not break?
> n.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:42D29B65.8141EDDE@sympatico.ca...
>> Damn, but it is hard to bitch about having too much traction....
>>
>> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
>> engine mounts, wheel locking hubs and u-joints.
>>
>> I blew a hub earlier this spring and just found two new bolts snapped
>> off in it so I have to pull it and try to get the stubs out.
>>
>> Then the muffler shop was crying about a bad engine mount so I looked
>> and sure enough I had just shattered the sucker.
>>
>> I didn't tear the metal off the rubber pad, I shattered the metal!
>>
>> I have lost count, but I think that is the 4th or 5th blown mount over 5
>> or 6 years.
>>
>> Oh well, 'you play you pay' as they say and we sure had/have fun
>> breaking it....
>>
>> :-)
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>
>
07-11-2005, 05:00 PM
#7
Guest
Posts: n/a
Re: Killed another engine mount....
Yeah they do.
http://www.mountainoffroad.com/catal.../bombproof.htm
But strengthen your motor mounts and what breaks next? Hopefully a u-joint.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:HtAAe.44$7N3.13412@news.uswest.net...
> These are stock mounts, yes? Does M.O.R.E. or anyone else make something
> for your CJ that might not break?
> n.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:42D29B65.8141EDDE@sympatico.ca...
>> Damn, but it is hard to bitch about having too much traction....
>>
>> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
>> engine mounts, wheel locking hubs and u-joints.
>>
>> I blew a hub earlier this spring and just found two new bolts snapped
>> off in it so I have to pull it and try to get the stubs out.
>>
>> Then the muffler shop was crying about a bad engine mount so I looked
>> and sure enough I had just shattered the sucker.
>>
>> I didn't tear the metal off the rubber pad, I shattered the metal!
>>
>> I have lost count, but I think that is the 4th or 5th blown mount over 5
>> or 6 years.
>>
>> Oh well, 'you play you pay' as they say and we sure had/have fun
>> breaking it....
>>
>> :-)
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>
>
http://www.mountainoffroad.com/catal.../bombproof.htm
But strengthen your motor mounts and what breaks next? Hopefully a u-joint.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:HtAAe.44$7N3.13412@news.uswest.net...
> These are stock mounts, yes? Does M.O.R.E. or anyone else make something
> for your CJ that might not break?
> n.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:42D29B65.8141EDDE@sympatico.ca...
>> Damn, but it is hard to bitch about having too much traction....
>>
>> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
>> engine mounts, wheel locking hubs and u-joints.
>>
>> I blew a hub earlier this spring and just found two new bolts snapped
>> off in it so I have to pull it and try to get the stubs out.
>>
>> Then the muffler shop was crying about a bad engine mount so I looked
>> and sure enough I had just shattered the sucker.
>>
>> I didn't tear the metal off the rubber pad, I shattered the metal!
>>
>> I have lost count, but I think that is the 4th or 5th blown mount over 5
>> or 6 years.
>>
>> Oh well, 'you play you pay' as they say and we sure had/have fun
>> breaking it....
>>
>> :-)
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>
>
07-11-2005, 05:00 PM
#8
Guest
Posts: n/a
Re: Killed another engine mount....
Yeah they do.
http://www.mountainoffroad.com/catal.../bombproof.htm
But strengthen your motor mounts and what breaks next? Hopefully a u-joint.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:HtAAe.44$7N3.13412@news.uswest.net...
> These are stock mounts, yes? Does M.O.R.E. or anyone else make something
> for your CJ that might not break?
> n.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:42D29B65.8141EDDE@sympatico.ca...
>> Damn, but it is hard to bitch about having too much traction....
>>
>> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
>> engine mounts, wheel locking hubs and u-joints.
>>
>> I blew a hub earlier this spring and just found two new bolts snapped
>> off in it so I have to pull it and try to get the stubs out.
>>
>> Then the muffler shop was crying about a bad engine mount so I looked
>> and sure enough I had just shattered the sucker.
>>
>> I didn't tear the metal off the rubber pad, I shattered the metal!
>>
>> I have lost count, but I think that is the 4th or 5th blown mount over 5
>> or 6 years.
>>
>> Oh well, 'you play you pay' as they say and we sure had/have fun
>> breaking it....
>>
>> :-)
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>
>
http://www.mountainoffroad.com/catal.../bombproof.htm
But strengthen your motor mounts and what breaks next? Hopefully a u-joint.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:HtAAe.44$7N3.13412@news.uswest.net...
> These are stock mounts, yes? Does M.O.R.E. or anyone else make something
> for your CJ that might not break?
> n.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:42D29B65.8141EDDE@sympatico.ca...
>> Damn, but it is hard to bitch about having too much traction....
>>
>> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
>> engine mounts, wheel locking hubs and u-joints.
>>
>> I blew a hub earlier this spring and just found two new bolts snapped
>> off in it so I have to pull it and try to get the stubs out.
>>
>> Then the muffler shop was crying about a bad engine mount so I looked
>> and sure enough I had just shattered the sucker.
>>
>> I didn't tear the metal off the rubber pad, I shattered the metal!
>>
>> I have lost count, but I think that is the 4th or 5th blown mount over 5
>> or 6 years.
>>
>> Oh well, 'you play you pay' as they say and we sure had/have fun
>> breaking it....
>>
>> :-)
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>
>
07-11-2005, 05:00 PM
#9
Guest
Posts: n/a
Re: Killed another engine mount....
Yeah they do.
http://www.mountainoffroad.com/catal.../bombproof.htm
But strengthen your motor mounts and what breaks next? Hopefully a u-joint.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:HtAAe.44$7N3.13412@news.uswest.net...
> These are stock mounts, yes? Does M.O.R.E. or anyone else make something
> for your CJ that might not break?
> n.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:42D29B65.8141EDDE@sympatico.ca...
>> Damn, but it is hard to bitch about having too much traction....
>>
>> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
>> engine mounts, wheel locking hubs and u-joints.
>>
>> I blew a hub earlier this spring and just found two new bolts snapped
>> off in it so I have to pull it and try to get the stubs out.
>>
>> Then the muffler shop was crying about a bad engine mount so I looked
>> and sure enough I had just shattered the sucker.
>>
>> I didn't tear the metal off the rubber pad, I shattered the metal!
>>
>> I have lost count, but I think that is the 4th or 5th blown mount over 5
>> or 6 years.
>>
>> Oh well, 'you play you pay' as they say and we sure had/have fun
>> breaking it....
>>
>> :-)
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>
>
http://www.mountainoffroad.com/catal.../bombproof.htm
But strengthen your motor mounts and what breaks next? Hopefully a u-joint.
"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:HtAAe.44$7N3.13412@news.uswest.net...
> These are stock mounts, yes? Does M.O.R.E. or anyone else make something
> for your CJ that might not break?
> n.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:42D29B65.8141EDDE@sympatico.ca...
>> Damn, but it is hard to bitch about having too much traction....
>>
>> My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
>> engine mounts, wheel locking hubs and u-joints.
>>
>> I blew a hub earlier this spring and just found two new bolts snapped
>> off in it so I have to pull it and try to get the stubs out.
>>
>> Then the muffler shop was crying about a bad engine mount so I looked
>> and sure enough I had just shattered the sucker.
>>
>> I didn't tear the metal off the rubber pad, I shattered the metal!
>>
>> I have lost count, but I think that is the 4th or 5th blown mount over 5
>> or 6 years.
>>
>> Oh well, 'you play you pay' as they say and we sure had/have fun
>> breaking it....
>>
>> :-)
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>
>
07-14-2005, 11:54 AM
#10
Guest
Posts: n/a
Re: Killed another engine mount....
Just thinking aloud here: I wonder if there might not be a useful "fuse"
effect at work here. If Mike finds stronger motor mounts and installs
them the next weakest link will break when he beats on his Jeep. The
next weakest link might not be so friendly.
Nathan Otis wrote:
> These are stock mounts, yes? Does M.O.R.E. or anyone else make something for
> your CJ that might not break?
> n.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:42D29B65.8141EDDE@sympatico.ca...
>
>>Damn, but it is hard to bitch about having too much traction....
>>
>>My 33x9.5 BFG muds just don't spin, so they put amazing stresses on my
>>engine mounts, wheel locking hubs and u-joints.
>>
>>I blew a hub earlier this spring and just found two new bolts snapped
>>off in it so I have to pull it and try to get the stubs out.
>>
>>Then the muffler shop was crying about a bad engine mount so I looked
>>and sure enough I had just shattered the sucker.
>>
>>I didn't tear the metal off the rubber pad, I shattered the metal!
>>
>>I have lost count, but I think that is the 4th or 5th blown mount over 5
>>or 6 years.
>>
>>Oh well, 'you play you pay' as they say and we sure had/have fun
>>breaking it....
>>
>>:-)
>>
>>Mike
>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>88 Cherokee 235 BFG AT's
>
>
>