Key Cyl. Help
11-12-2006, 05:35 PM
#2
Guest
Posts: n/a
Re: Key Cyl. Help
According to Haynes, after you remove the steering wheel, turn signal
switch, hazard warning switch, and ignition key lamp assembly, turn the key
to the ON position, remove the retaining screw, which is inside the steering
column, and then withdraw the lock cylinder.
Earle
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
> Howdy all,
>
> I need to replace the key lock cylinder on the steering column in the '87
> Wrangler I just bought. I don't know how it comes apart.
>
> Any help?
>
> Thanks in advance,
>
> Spdloader
>
>
--
Posted via a free Usenet account from http://www.teranews.com
switch, hazard warning switch, and ignition key lamp assembly, turn the key
to the ON position, remove the retaining screw, which is inside the steering
column, and then withdraw the lock cylinder.
Earle
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
> Howdy all,
>
> I need to replace the key lock cylinder on the steering column in the '87
> Wrangler I just bought. I don't know how it comes apart.
>
> Any help?
>
> Thanks in advance,
>
> Spdloader
>
>
--
Posted via a free Usenet account from http://www.teranews.com
11-12-2006, 05:35 PM
#3
Guest
Posts: n/a
Re: Key Cyl. Help
According to Haynes, after you remove the steering wheel, turn signal
switch, hazard warning switch, and ignition key lamp assembly, turn the key
to the ON position, remove the retaining screw, which is inside the steering
column, and then withdraw the lock cylinder.
Earle
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
> Howdy all,
>
> I need to replace the key lock cylinder on the steering column in the '87
> Wrangler I just bought. I don't know how it comes apart.
>
> Any help?
>
> Thanks in advance,
>
> Spdloader
>
>
--
Posted via a free Usenet account from http://www.teranews.com
switch, hazard warning switch, and ignition key lamp assembly, turn the key
to the ON position, remove the retaining screw, which is inside the steering
column, and then withdraw the lock cylinder.
Earle
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
> Howdy all,
>
> I need to replace the key lock cylinder on the steering column in the '87
> Wrangler I just bought. I don't know how it comes apart.
>
> Any help?
>
> Thanks in advance,
>
> Spdloader
>
>
--
Posted via a free Usenet account from http://www.teranews.com
11-12-2006, 05:35 PM
#4
Guest
Posts: n/a
Re: Key Cyl. Help
According to Haynes, after you remove the steering wheel, turn signal
switch, hazard warning switch, and ignition key lamp assembly, turn the key
to the ON position, remove the retaining screw, which is inside the steering
column, and then withdraw the lock cylinder.
Earle
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
> Howdy all,
>
> I need to replace the key lock cylinder on the steering column in the '87
> Wrangler I just bought. I don't know how it comes apart.
>
> Any help?
>
> Thanks in advance,
>
> Spdloader
>
>
--
Posted via a free Usenet account from http://www.teranews.com
switch, hazard warning switch, and ignition key lamp assembly, turn the key
to the ON position, remove the retaining screw, which is inside the steering
column, and then withdraw the lock cylinder.
Earle
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
> Howdy all,
>
> I need to replace the key lock cylinder on the steering column in the '87
> Wrangler I just bought. I don't know how it comes apart.
>
> Any help?
>
> Thanks in advance,
>
> Spdloader
>
>
--
Posted via a free Usenet account from http://www.teranews.com
11-12-2006, 05:36 PM
#5
Guest
Posts: n/a
Re: Key Cyl. Help
Thanks Earle. I've got to get a manual on this old Wrangler.
Spdloader
"Earle Horton" <el_anglo_burgues@usa.com> wrote in message
news:4557916e$0$21220$88260bb3@free.teranews.com.. .
> According to Haynes, after you remove the steering wheel, turn signal
> switch, hazard warning switch, and ignition key lamp assembly, turn the
> key
> to the ON position, remove the retaining screw, which is inside the
> steering
> column, and then withdraw the lock cylinder.
>
> Earle
>
> "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
> news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
>> Howdy all,
>>
>> I need to replace the key lock cylinder on the steering column in the '87
>> Wrangler I just bought. I don't know how it comes apart.
>>
>> Any help?
>>
>> Thanks in advance,
>>
>> Spdloader
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
Spdloader
"Earle Horton" <el_anglo_burgues@usa.com> wrote in message
news:4557916e$0$21220$88260bb3@free.teranews.com.. .
> According to Haynes, after you remove the steering wheel, turn signal
> switch, hazard warning switch, and ignition key lamp assembly, turn the
> key
> to the ON position, remove the retaining screw, which is inside the
> steering
> column, and then withdraw the lock cylinder.
>
> Earle
>
> "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
> news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
>> Howdy all,
>>
>> I need to replace the key lock cylinder on the steering column in the '87
>> Wrangler I just bought. I don't know how it comes apart.
>>
>> Any help?
>>
>> Thanks in advance,
>>
>> Spdloader
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
11-12-2006, 05:36 PM
#6
Guest
Posts: n/a
Re: Key Cyl. Help
Thanks Earle. I've got to get a manual on this old Wrangler.
Spdloader
"Earle Horton" <el_anglo_burgues@usa.com> wrote in message
news:4557916e$0$21220$88260bb3@free.teranews.com.. .
> According to Haynes, after you remove the steering wheel, turn signal
> switch, hazard warning switch, and ignition key lamp assembly, turn the
> key
> to the ON position, remove the retaining screw, which is inside the
> steering
> column, and then withdraw the lock cylinder.
>
> Earle
>
> "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
> news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
>> Howdy all,
>>
>> I need to replace the key lock cylinder on the steering column in the '87
>> Wrangler I just bought. I don't know how it comes apart.
>>
>> Any help?
>>
>> Thanks in advance,
>>
>> Spdloader
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
Spdloader
"Earle Horton" <el_anglo_burgues@usa.com> wrote in message
news:4557916e$0$21220$88260bb3@free.teranews.com.. .
> According to Haynes, after you remove the steering wheel, turn signal
> switch, hazard warning switch, and ignition key lamp assembly, turn the
> key
> to the ON position, remove the retaining screw, which is inside the
> steering
> column, and then withdraw the lock cylinder.
>
> Earle
>
> "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
> news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
>> Howdy all,
>>
>> I need to replace the key lock cylinder on the steering column in the '87
>> Wrangler I just bought. I don't know how it comes apart.
>>
>> Any help?
>>
>> Thanks in advance,
>>
>> Spdloader
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
11-12-2006, 05:36 PM
#7
Guest
Posts: n/a
Re: Key Cyl. Help
Thanks Earle. I've got to get a manual on this old Wrangler.
Spdloader
"Earle Horton" <el_anglo_burgues@usa.com> wrote in message
news:4557916e$0$21220$88260bb3@free.teranews.com.. .
> According to Haynes, after you remove the steering wheel, turn signal
> switch, hazard warning switch, and ignition key lamp assembly, turn the
> key
> to the ON position, remove the retaining screw, which is inside the
> steering
> column, and then withdraw the lock cylinder.
>
> Earle
>
> "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
> news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
>> Howdy all,
>>
>> I need to replace the key lock cylinder on the steering column in the '87
>> Wrangler I just bought. I don't know how it comes apart.
>>
>> Any help?
>>
>> Thanks in advance,
>>
>> Spdloader
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
Spdloader
"Earle Horton" <el_anglo_burgues@usa.com> wrote in message
news:4557916e$0$21220$88260bb3@free.teranews.com.. .
> According to Haynes, after you remove the steering wheel, turn signal
> switch, hazard warning switch, and ignition key lamp assembly, turn the
> key
> to the ON position, remove the retaining screw, which is inside the
> steering
> column, and then withdraw the lock cylinder.
>
> Earle
>
> "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
> news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
>> Howdy all,
>>
>> I need to replace the key lock cylinder on the steering column in the '87
>> Wrangler I just bought. I don't know how it comes apart.
>>
>> Any help?
>>
>> Thanks in advance,
>>
>> Spdloader
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
11-13-2006, 07:32 PM
#8
Guest
Posts: n/a
Re: Key Cyl. Help
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
> Howdy all,
>
> I need to replace the key lock cylinder on the steering column in the '87
> Wrangler I just bought. I don't know how it comes apart.
>
> Any help?
>
> Thanks in advance,
>
> Spdloader
>
Why do you need to remove it?
I've got an 87 that I bought a replacement for because I couldn't get a key
copy that would work. I explained it to a locksmith and he said he could cut
me a new master for $19. He used my key as a template, looked in his bookd
to see where some other keys has cuts, and guessed on the 'code'. It worked
great.
news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
> Howdy all,
>
> I need to replace the key lock cylinder on the steering column in the '87
> Wrangler I just bought. I don't know how it comes apart.
>
> Any help?
>
> Thanks in advance,
>
> Spdloader
>
Why do you need to remove it?
I've got an 87 that I bought a replacement for because I couldn't get a key
copy that would work. I explained it to a locksmith and he said he could cut
me a new master for $19. He used my key as a template, looked in his bookd
to see where some other keys has cuts, and guessed on the 'code'. It worked
great.
11-13-2006, 07:32 PM
#9
Guest
Posts: n/a
Re: Key Cyl. Help
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
> Howdy all,
>
> I need to replace the key lock cylinder on the steering column in the '87
> Wrangler I just bought. I don't know how it comes apart.
>
> Any help?
>
> Thanks in advance,
>
> Spdloader
>
Why do you need to remove it?
I've got an 87 that I bought a replacement for because I couldn't get a key
copy that would work. I explained it to a locksmith and he said he could cut
me a new master for $19. He used my key as a template, looked in his bookd
to see where some other keys has cuts, and guessed on the 'code'. It worked
great.
news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
> Howdy all,
>
> I need to replace the key lock cylinder on the steering column in the '87
> Wrangler I just bought. I don't know how it comes apart.
>
> Any help?
>
> Thanks in advance,
>
> Spdloader
>
Why do you need to remove it?
I've got an 87 that I bought a replacement for because I couldn't get a key
copy that would work. I explained it to a locksmith and he said he could cut
me a new master for $19. He used my key as a template, looked in his bookd
to see where some other keys has cuts, and guessed on the 'code'. It worked
great.
11-13-2006, 07:32 PM
#10
Guest
Posts: n/a
Re: Key Cyl. Help
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
> Howdy all,
>
> I need to replace the key lock cylinder on the steering column in the '87
> Wrangler I just bought. I don't know how it comes apart.
>
> Any help?
>
> Thanks in advance,
>
> Spdloader
>
Why do you need to remove it?
I've got an 87 that I bought a replacement for because I couldn't get a key
copy that would work. I explained it to a locksmith and he said he could cut
me a new master for $19. He used my key as a template, looked in his bookd
to see where some other keys has cuts, and guessed on the 'code'. It worked
great.
news:%aM5h.29164$HD6.19495@tornado.southeast.rr.co m...
> Howdy all,
>
> I need to replace the key lock cylinder on the steering column in the '87
> Wrangler I just bought. I don't know how it comes apart.
>
> Any help?
>
> Thanks in advance,
>
> Spdloader
>
Why do you need to remove it?
I've got an 87 that I bought a replacement for because I couldn't get a key
copy that would work. I explained it to a locksmith and he said he could cut
me a new master for $19. He used my key as a template, looked in his bookd
to see where some other keys has cuts, and guessed on the 'code'. It worked
great.
