Some hafta, some don't. I lucked out. I'm also running a body lift and the
transfer case is lifted another couple inches above stock...

Bill brings up a good point though... If you get any rubbing, the tub can be
"adjusted" for clearance. You might wanna watch out for rubbing on the tub
under the shift boot in the Jeep, too. If you notice it's tough to get to
(or stay in) 2nd, 4th or reverse especially.
n.

"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42C98B4C.6B194451@***.net...
> Hi Nathan,
> Don't you, along with centering the lever in the hole through the
> floorboard, make the hole bigger?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nathan Otis wrote:
>>
>> I couldn't find a picture online and I hate doing things half way, so...
>> Here's a road map.
>>
>> http://www.users.qwest.net/~b-otis/shift%20linkage/
>> n.
>

 

Im guessing thats only if you drop the t-case, which I diddnt. I installed
a SYE with a CV shaft.

"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42C98B4C.6B194451@***.net...
> Hi Nathan,
> Don't you, along with centering the lever in the hole through the
> floorboard, make the hole bigger?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nathan Otis wrote:
>>
>> I couldn't find a picture online and I hate doing things half way, so...
>> Here's a road map.
>>
>> http://www.users.qwest.net/~b-otis/shift%20linkage/
>> n.

 

Im guessing thats only if you drop the t-case, which I diddnt. I installed
a SYE with a CV shaft.

"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42C98B4C.6B194451@***.net...
> Hi Nathan,
> Don't you, along with centering the lever in the hole through the
> floorboard, make the hole bigger?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nathan Otis wrote:
>>
>> I couldn't find a picture online and I hate doing things half way, so...
>> Here's a road map.
>>
>> http://www.users.qwest.net/~b-otis/shift%20linkage/
>> n.

 

Im guessing thats only if you drop the t-case, which I diddnt. I installed
a SYE with a CV shaft.

"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42C98B4C.6B194451@***.net...
> Hi Nathan,
> Don't you, along with centering the lever in the hole through the
> floorboard, make the hole bigger?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nathan Otis wrote:
>>
>> I couldn't find a picture online and I hate doing things half way, so...
>> Here's a road map.
>>
>> http://www.users.qwest.net/~b-otis/shift%20linkage/
>> n.

 

Im guessing thats only if you drop the t-case, which I diddnt. I installed
a SYE with a CV shaft.

"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42C98B4C.6B194451@***.net...
> Hi Nathan,
> Don't you, along with centering the lever in the hole through the
> floorboard, make the hole bigger?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nathan Otis wrote:
>>
>> I couldn't find a picture online and I hate doing things half way, so...
>> Here's a road map.
>>
>> http://www.users.qwest.net/~b-otis/shift%20linkage/
>> n.