Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
08-05-2004, 08:59 PM
#21
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
I'd rather have the very best available, but sometimes I have ---- to work
with and have to make the best out of the situation at hand.
I think the OPs plan to put a 30-spline in is a good one. Not the best plan,
but a good one.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112B507.9ABD27F7@***.net...
> Hi Jeff,
> Which would you rather have?
> http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
> have to worry because you're stronger than a Dana 44:
> http://www.----------.com/mirror/compareAMCdana.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> CRWLR wrote:
> >
> > What are you saying Bill!?
> >
> > The 30-spline shafts should give him as close to the strength of the D44
> > without actually installing a D44. The Super35 axle shafts are a great
buy
> > and a good investment for this guy.
with and have to make the best out of the situation at hand.
I think the OPs plan to put a 30-spline in is a good one. Not the best plan,
but a good one.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112B507.9ABD27F7@***.net...
> Hi Jeff,
> Which would you rather have?
> http://www.----------.com/dana35c/brokenR&P.jpg Of course, you don't
> have to worry because you're stronger than a Dana 44:
> http://www.----------.com/mirror/compareAMCdana.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> CRWLR wrote:
> >
> > What are you saying Bill!?
> >
> > The 30-spline shafts should give him as close to the strength of the D44
> > without actually installing a D44. The Super35 axle shafts are a great
buy
> > and a good investment for this guy.
08-06-2004, 09:22 PM
#22
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
Problem is he wants to install 30 spline axles with a No-Slip (not a 30
spline locker.)
There's no way to go to 30 spline in a D35, without a 30 spline locker (as
in the Super 35 kit). The very first (no longer available) Super 35 kits
came with a lock right. Then a Detroit, then OX/Detroit, now
ARB/Detroit.....but nowhere was there a No-Slip, so he can't use 30 spline
shafts with the No-Slip, even if he could find 30 spline shafts (Superior
or Randy's R&P make 'em)
Paul
On Thu, 05 Aug 2004 14:10:07 -0700, CRWLR wrote:
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great
> buy and a good investment for this guy.
>
spline locker.)
There's no way to go to 30 spline in a D35, without a 30 spline locker (as
in the Super 35 kit). The very first (no longer available) Super 35 kits
came with a lock right. Then a Detroit, then OX/Detroit, now
ARB/Detroit.....but nowhere was there a No-Slip, so he can't use 30 spline
shafts with the No-Slip, even if he could find 30 spline shafts (Superior
or Randy's R&P make 'em)
Paul
On Thu, 05 Aug 2004 14:10:07 -0700, CRWLR wrote:
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great
> buy and a good investment for this guy.
>
08-06-2004, 09:22 PM
#23
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
Problem is he wants to install 30 spline axles with a No-Slip (not a 30
spline locker.)
There's no way to go to 30 spline in a D35, without a 30 spline locker (as
in the Super 35 kit). The very first (no longer available) Super 35 kits
came with a lock right. Then a Detroit, then OX/Detroit, now
ARB/Detroit.....but nowhere was there a No-Slip, so he can't use 30 spline
shafts with the No-Slip, even if he could find 30 spline shafts (Superior
or Randy's R&P make 'em)
Paul
On Thu, 05 Aug 2004 14:10:07 -0700, CRWLR wrote:
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great
> buy and a good investment for this guy.
>
spline locker.)
There's no way to go to 30 spline in a D35, without a 30 spline locker (as
in the Super 35 kit). The very first (no longer available) Super 35 kits
came with a lock right. Then a Detroit, then OX/Detroit, now
ARB/Detroit.....but nowhere was there a No-Slip, so he can't use 30 spline
shafts with the No-Slip, even if he could find 30 spline shafts (Superior
or Randy's R&P make 'em)
Paul
On Thu, 05 Aug 2004 14:10:07 -0700, CRWLR wrote:
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great
> buy and a good investment for this guy.
>
08-06-2004, 09:22 PM
#24
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
Problem is he wants to install 30 spline axles with a No-Slip (not a 30
spline locker.)
There's no way to go to 30 spline in a D35, without a 30 spline locker (as
in the Super 35 kit). The very first (no longer available) Super 35 kits
came with a lock right. Then a Detroit, then OX/Detroit, now
ARB/Detroit.....but nowhere was there a No-Slip, so he can't use 30 spline
shafts with the No-Slip, even if he could find 30 spline shafts (Superior
or Randy's R&P make 'em)
Paul
On Thu, 05 Aug 2004 14:10:07 -0700, CRWLR wrote:
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great
> buy and a good investment for this guy.
>
spline locker.)
There's no way to go to 30 spline in a D35, without a 30 spline locker (as
in the Super 35 kit). The very first (no longer available) Super 35 kits
came with a lock right. Then a Detroit, then OX/Detroit, now
ARB/Detroit.....but nowhere was there a No-Slip, so he can't use 30 spline
shafts with the No-Slip, even if he could find 30 spline shafts (Superior
or Randy's R&P make 'em)
Paul
On Thu, 05 Aug 2004 14:10:07 -0700, CRWLR wrote:
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great
> buy and a good investment for this guy.
>
08-06-2004, 09:22 PM
#25
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
Problem is he wants to install 30 spline axles with a No-Slip (not a 30
spline locker.)
There's no way to go to 30 spline in a D35, without a 30 spline locker (as
in the Super 35 kit). The very first (no longer available) Super 35 kits
came with a lock right. Then a Detroit, then OX/Detroit, now
ARB/Detroit.....but nowhere was there a No-Slip, so he can't use 30 spline
shafts with the No-Slip, even if he could find 30 spline shafts (Superior
or Randy's R&P make 'em)
Paul
On Thu, 05 Aug 2004 14:10:07 -0700, CRWLR wrote:
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great
> buy and a good investment for this guy.
>
spline locker.)
There's no way to go to 30 spline in a D35, without a 30 spline locker (as
in the Super 35 kit). The very first (no longer available) Super 35 kits
came with a lock right. Then a Detroit, then OX/Detroit, now
ARB/Detroit.....but nowhere was there a No-Slip, so he can't use 30 spline
shafts with the No-Slip, even if he could find 30 spline shafts (Superior
or Randy's R&P make 'em)
Paul
On Thu, 05 Aug 2004 14:10:07 -0700, CRWLR wrote:
> What are you saying Bill!?
>
> The 30-spline shafts should give him as close to the strength of the D44
> without actually installing a D44. The Super35 axle shafts are a great
> buy and a good investment for this guy.
>
08-06-2004, 09:57 PM
#26
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
Yeah the powertrax No-Slip seemingly replaces the spider gears so new
ones will not be needed. However, with this in mind i was wondering
if the no-slip locker for the dana 35c would work with 30 spline
shafts, since it was designed probably for 27 spline axle shafts.
Comments?
ones will not be needed. However, with this in mind i was wondering
if the no-slip locker for the dana 35c would work with 30 spline
shafts, since it was designed probably for 27 spline axle shafts.
Comments?
08-06-2004, 09:57 PM
#27
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
Yeah the powertrax No-Slip seemingly replaces the spider gears so new
ones will not be needed. However, with this in mind i was wondering
if the no-slip locker for the dana 35c would work with 30 spline
shafts, since it was designed probably for 27 spline axle shafts.
Comments?
ones will not be needed. However, with this in mind i was wondering
if the no-slip locker for the dana 35c would work with 30 spline
shafts, since it was designed probably for 27 spline axle shafts.
Comments?
08-06-2004, 09:57 PM
#28
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
Yeah the powertrax No-Slip seemingly replaces the spider gears so new
ones will not be needed. However, with this in mind i was wondering
if the no-slip locker for the dana 35c would work with 30 spline
shafts, since it was designed probably for 27 spline axle shafts.
Comments?
ones will not be needed. However, with this in mind i was wondering
if the no-slip locker for the dana 35c would work with 30 spline
shafts, since it was designed probably for 27 spline axle shafts.
Comments?
08-06-2004, 09:57 PM
#29
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
Yeah the powertrax No-Slip seemingly replaces the spider gears so new
ones will not be needed. However, with this in mind i was wondering
if the no-slip locker for the dana 35c would work with 30 spline
shafts, since it was designed probably for 27 spline axle shafts.
Comments?
ones will not be needed. However, with this in mind i was wondering
if the no-slip locker for the dana 35c would work with 30 spline
shafts, since it was designed probably for 27 spline axle shafts.
Comments?
08-06-2004, 10:45 PM
#30
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shaftsfor d35c?
I don't see how you could have room to cut a bigger "C" clip into
these little spiders: http://----------.com/dana35c/dana35cclip.jpg This
site mentions a machined carrier to except the larger axles, and that
the carrier became too weak:
http://www.4x4wire.com/jeep/reviews/super35d/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Derek Proctor wrote:
>
> Yeah the powertrax No-Slip seemingly replaces the spider gears so new
> ones will not be needed. However, with this in mind i was wondering
> if the no-slip locker for the dana 35c would work with 30 spline
> shafts, since it was designed probably for 27 spline axle shafts.
> Comments?
these little spiders: http://----------.com/dana35c/dana35cclip.jpg This
site mentions a machined carrier to except the larger axles, and that
the carrier became too weak:
http://www.4x4wire.com/jeep/reviews/super35d/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Derek Proctor wrote:
>
> Yeah the powertrax No-Slip seemingly replaces the spider gears so new
> ones will not be needed. However, with this in mind i was wondering
> if the no-slip locker for the dana 35c would work with 30 spline
> shafts, since it was designed probably for 27 spline axle shafts.
> Comments?
