Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
08-05-2004, 01:58 PM
#1
Guest
Posts: n/a
Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
Hello,
I currently have a dana 35c rear axle with 33" tires. Im adding a
powertrax no-slip locker into it soon. while im there i plan to
upgrade the axle shafts to 30 spline. I would like to know where on
the internet (or anywhere that delivers) i could find 30 spline axle
shafts for a dana 35c. I understand that superior has them, but i do
not want a detroit locker (its my daily driver) that is included with
a "super 35" kit. I also have heard of people here who have moser
shafts but i cant find them anywhere for the dana 35.
Also, when installing the locker, will the old axle slide right out if
i pull the c-clips? Will they come out freely and would the 30 spline
shafts replace the same way easily?
Thanks
Derek
I currently have a dana 35c rear axle with 33" tires. Im adding a
powertrax no-slip locker into it soon. while im there i plan to
upgrade the axle shafts to 30 spline. I would like to know where on
the internet (or anywhere that delivers) i could find 30 spline axle
shafts for a dana 35c. I understand that superior has them, but i do
not want a detroit locker (its my daily driver) that is included with
a "super 35" kit. I also have heard of people here who have moser
shafts but i cant find them anywhere for the dana 35.
Also, when installing the locker, will the old axle slide right out if
i pull the c-clips? Will they come out freely and would the 30 spline
shafts replace the same way easily?
Thanks
Derek
08-05-2004, 03:26 PM
#2
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
That sounds alot like the Super35 Kit from Superior Gear. I got my Superior
Gear one-piece axles for my AMC20 from a place in Corona, CA., called
DriveTrains Direct. My guess is that you could probably get them from Bob
Supplee as well. Bob is probably cheaper.
The shafts will slide right out, but the spider gears will need to be
replaced because they have a different spline count.
"Derek Proctor" <dirk44@aol.com> wrote in message
news:3ade3bcf.0408050958.4aaa33b5@posting.google.c om...
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
Gear one-piece axles for my AMC20 from a place in Corona, CA., called
DriveTrains Direct. My guess is that you could probably get them from Bob
Supplee as well. Bob is probably cheaper.
The shafts will slide right out, but the spider gears will need to be
replaced because they have a different spline count.
"Derek Proctor" <dirk44@aol.com> wrote in message
news:3ade3bcf.0408050958.4aaa33b5@posting.google.c om...
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
08-05-2004, 03:26 PM
#3
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
That sounds alot like the Super35 Kit from Superior Gear. I got my Superior
Gear one-piece axles for my AMC20 from a place in Corona, CA., called
DriveTrains Direct. My guess is that you could probably get them from Bob
Supplee as well. Bob is probably cheaper.
The shafts will slide right out, but the spider gears will need to be
replaced because they have a different spline count.
"Derek Proctor" <dirk44@aol.com> wrote in message
news:3ade3bcf.0408050958.4aaa33b5@posting.google.c om...
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
Gear one-piece axles for my AMC20 from a place in Corona, CA., called
DriveTrains Direct. My guess is that you could probably get them from Bob
Supplee as well. Bob is probably cheaper.
The shafts will slide right out, but the spider gears will need to be
replaced because they have a different spline count.
"Derek Proctor" <dirk44@aol.com> wrote in message
news:3ade3bcf.0408050958.4aaa33b5@posting.google.c om...
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
08-05-2004, 03:26 PM
#4
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
That sounds alot like the Super35 Kit from Superior Gear. I got my Superior
Gear one-piece axles for my AMC20 from a place in Corona, CA., called
DriveTrains Direct. My guess is that you could probably get them from Bob
Supplee as well. Bob is probably cheaper.
The shafts will slide right out, but the spider gears will need to be
replaced because they have a different spline count.
"Derek Proctor" <dirk44@aol.com> wrote in message
news:3ade3bcf.0408050958.4aaa33b5@posting.google.c om...
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
Gear one-piece axles for my AMC20 from a place in Corona, CA., called
DriveTrains Direct. My guess is that you could probably get them from Bob
Supplee as well. Bob is probably cheaper.
The shafts will slide right out, but the spider gears will need to be
replaced because they have a different spline count.
"Derek Proctor" <dirk44@aol.com> wrote in message
news:3ade3bcf.0408050958.4aaa33b5@posting.google.c om...
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
08-05-2004, 03:26 PM
#5
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
That sounds alot like the Super35 Kit from Superior Gear. I got my Superior
Gear one-piece axles for my AMC20 from a place in Corona, CA., called
DriveTrains Direct. My guess is that you could probably get them from Bob
Supplee as well. Bob is probably cheaper.
The shafts will slide right out, but the spider gears will need to be
replaced because they have a different spline count.
"Derek Proctor" <dirk44@aol.com> wrote in message
news:3ade3bcf.0408050958.4aaa33b5@posting.google.c om...
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
Gear one-piece axles for my AMC20 from a place in Corona, CA., called
DriveTrains Direct. My guess is that you could probably get them from Bob
Supplee as well. Bob is probably cheaper.
The shafts will slide right out, but the spider gears will need to be
replaced because they have a different spline count.
"Derek Proctor" <dirk44@aol.com> wrote in message
news:3ade3bcf.0408050958.4aaa33b5@posting.google.c om...
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
08-05-2004, 04:07 PM
#6
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shaftsfor d35c?
Eye ball the difference between a Dana 44 and 35 ring and pinion,
then don't waste your money:
http://www.jpmagazine.com/techarticles/16722/ Of course I could always
use more pictures: http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
then don't waste your money:
http://www.jpmagazine.com/techarticles/16722/ Of course I could always
use more pictures: http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
08-05-2004, 04:07 PM
#7
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shaftsfor d35c?
Eye ball the difference between a Dana 44 and 35 ring and pinion,
then don't waste your money:
http://www.jpmagazine.com/techarticles/16722/ Of course I could always
use more pictures: http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
then don't waste your money:
http://www.jpmagazine.com/techarticles/16722/ Of course I could always
use more pictures: http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
08-05-2004, 04:07 PM
#8
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shaftsfor d35c?
Eye ball the difference between a Dana 44 and 35 ring and pinion,
then don't waste your money:
http://www.jpmagazine.com/techarticles/16722/ Of course I could always
use more pictures: http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
then don't waste your money:
http://www.jpmagazine.com/techarticles/16722/ Of course I could always
use more pictures: http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
08-05-2004, 04:07 PM
#9
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shaftsfor d35c?
Eye ball the difference between a Dana 44 and 35 ring and pinion,
then don't waste your money:
http://www.jpmagazine.com/techarticles/16722/ Of course I could always
use more pictures: http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
then don't waste your money:
http://www.jpmagazine.com/techarticles/16722/ Of course I could always
use more pictures: http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hello,
> I currently have a dana 35c rear axle with 33" tires. Im adding a
> powertrax no-slip locker into it soon. while im there i plan to
> upgrade the axle shafts to 30 spline. I would like to know where on
> the internet (or anywhere that delivers) i could find 30 spline axle
> shafts for a dana 35c. I understand that superior has them, but i do
> not want a detroit locker (its my daily driver) that is included with
> a "super 35" kit. I also have heard of people here who have moser
> shafts but i cant find them anywhere for the dana 35.
>
> Also, when installing the locker, will the old axle slide right out if
> i pull the c-clips? Will they come out freely and would the 30 spline
> shafts replace the same way easily?
>
> Thanks
> Derek
08-05-2004, 05:10 PM
#10
Guest
Posts: n/a
Re: Jeep TJ - Does anyone know where i can find 30 spline axle shafts for d35c?
What are you saying Bill!?
The 30-spline shafts should give him as close to the strength of the D44
without actually installing a D44. The Super35 axle shafts are a great buy
and a good investment for this guy.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112936E.62ABBB77@***.net...
> Eye ball the difference between a Dana 44 and 35 ring and pinion,
> then don't waste your money:
> http://www.jpmagazine.com/techarticles/16722/ Of course I could always
> use more pictures: http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hello,
> > I currently have a dana 35c rear axle with 33" tires. Im adding a
> > powertrax no-slip locker into it soon. while im there i plan to
> > upgrade the axle shafts to 30 spline. I would like to know where on
> > the internet (or anywhere that delivers) i could find 30 spline axle
> > shafts for a dana 35c. I understand that superior has them, but i do
> > not want a detroit locker (its my daily driver) that is included with
> > a "super 35" kit. I also have heard of people here who have moser
> > shafts but i cant find them anywhere for the dana 35.
> >
> > Also, when installing the locker, will the old axle slide right out if
> > i pull the c-clips? Will they come out freely and would the 30 spline
> > shafts replace the same way easily?
> >
> > Thanks
> > Derek
The 30-spline shafts should give him as close to the strength of the D44
without actually installing a D44. The Super35 axle shafts are a great buy
and a good investment for this guy.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4112936E.62ABBB77@***.net...
> Eye ball the difference between a Dana 44 and 35 ring and pinion,
> then don't waste your money:
> http://www.jpmagazine.com/techarticles/16722/ Of course I could always
> use more pictures: http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hello,
> > I currently have a dana 35c rear axle with 33" tires. Im adding a
> > powertrax no-slip locker into it soon. while im there i plan to
> > upgrade the axle shafts to 30 spline. I would like to know where on
> > the internet (or anywhere that delivers) i could find 30 spline axle
> > shafts for a dana 35c. I understand that superior has them, but i do
> > not want a detroit locker (its my daily driver) that is included with
> > a "super 35" kit. I also have heard of people here who have moser
> > shafts but i cant find them anywhere for the dana 35.
> >
> > Also, when installing the locker, will the old axle slide right out if
> > i pull the c-clips? Will they come out freely and would the 30 spline
> > shafts replace the same way easily?
> >
> > Thanks
> > Derek
