Jeep TJ dana 35 with limited slip and 35s? can it be done?
Guest
Posts: n/a
Re: Jeep TJ dana 35 with limited slip and 35s? can it be done?
So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
on the dana 35??? This is my most favoarable option (true-tracs front
and rear), but i will bypass it if it definietly will not work. I
understand that a Locker on dana 35 stock axle shafts is 100% out of
the question with tires over 32-33", but how will a gear driven LSD
work with 35s?
ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
compressor alone, not including the added labor for the complex
installation it probably requires (i got a quote for true-tracs
front/rear, gears front/rear, and install kits for about the same cost
as an arb super 35 with compressor alone!). I dont offroad everyday,
but i do the jeep jamboree every year along with moderate NH/Ma
offroading every other month.
I think that LSDs would be more than enough for my needs, but if 35"
tires on a dana 35 with a limited slip will definetly NOT work, than i
will consider something else.
Thanks again,
Derek Proctor
on the dana 35??? This is my most favoarable option (true-tracs front
and rear), but i will bypass it if it definietly will not work. I
understand that a Locker on dana 35 stock axle shafts is 100% out of
the question with tires over 32-33", but how will a gear driven LSD
work with 35s?
ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
compressor alone, not including the added labor for the complex
installation it probably requires (i got a quote for true-tracs
front/rear, gears front/rear, and install kits for about the same cost
as an arb super 35 with compressor alone!). I dont offroad everyday,
but i do the jeep jamboree every year along with moderate NH/Ma
offroading every other month.
I think that LSDs would be more than enough for my needs, but if 35"
tires on a dana 35 with a limited slip will definetly NOT work, than i
will consider something else.
Thanks again,
Derek Proctor
Guest
Posts: n/a
Re: Jeep TJ dana 35 with limited slip and 35s? can it be done?
So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
on the dana 35??? This is my most favoarable option (true-tracs front
and rear), but i will bypass it if it definietly will not work. I
understand that a Locker on dana 35 stock axle shafts is 100% out of
the question with tires over 32-33", but how will a gear driven LSD
work with 35s?
ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
compressor alone, not including the added labor for the complex
installation it probably requires (i got a quote for true-tracs
front/rear, gears front/rear, and install kits for about the same cost
as an arb super 35 with compressor alone!). I dont offroad everyday,
but i do the jeep jamboree every year along with moderate NH/Ma
offroading every other month.
I think that LSDs would be more than enough for my needs, but if 35"
tires on a dana 35 with a limited slip will definetly NOT work, than i
will consider something else.
Thanks again,
Derek Proctor
on the dana 35??? This is my most favoarable option (true-tracs front
and rear), but i will bypass it if it definietly will not work. I
understand that a Locker on dana 35 stock axle shafts is 100% out of
the question with tires over 32-33", but how will a gear driven LSD
work with 35s?
ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
compressor alone, not including the added labor for the complex
installation it probably requires (i got a quote for true-tracs
front/rear, gears front/rear, and install kits for about the same cost
as an arb super 35 with compressor alone!). I dont offroad everyday,
but i do the jeep jamboree every year along with moderate NH/Ma
offroading every other month.
I think that LSDs would be more than enough for my needs, but if 35"
tires on a dana 35 with a limited slip will definetly NOT work, than i
will consider something else.
Thanks again,
Derek Proctor
Guest
Posts: n/a
Re: Jeep TJ dana 35 with limited slip and 35s? can it be done?
Go to the following link, kindly provided by Bill ------. It will tell you
all you need to know about Dana 35 axles.
http://www.----------.com/dana35c/
The best places for a Dana 35 are either in a smelter, being melted down to
make something useful, or at the bottom of a pond. (Please drained before
tossing into the pond. They make good fish habitiat.)
"Derek Proctor" <dirk44@aol.com> wrote in message
news:3ade3bcf.0410211641.61c0e612@posting.google.c om...
> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
> on the dana 35??? This is my most favoarable option (true-tracs front
> and rear), but i will bypass it if it definietly will not work. I
> understand that a Locker on dana 35 stock axle shafts is 100% out of
> the question with tires over 32-33", but how will a gear driven LSD
> work with 35s?
>
> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
> compressor alone, not including the added labor for the complex
> installation it probably requires (i got a quote for true-tracs
> front/rear, gears front/rear, and install kits for about the same cost
> as an arb super 35 with compressor alone!). I dont offroad everyday,
> but i do the jeep jamboree every year along with moderate NH/Ma
> offroading every other month.
>
> I think that LSDs would be more than enough for my needs, but if 35"
> tires on a dana 35 with a limited slip will definetly NOT work, than i
> will consider something else.
> Thanks again,
> Derek Proctor
all you need to know about Dana 35 axles.
http://www.----------.com/dana35c/
The best places for a Dana 35 are either in a smelter, being melted down to
make something useful, or at the bottom of a pond. (Please drained before
tossing into the pond. They make good fish habitiat.)
"Derek Proctor" <dirk44@aol.com> wrote in message
news:3ade3bcf.0410211641.61c0e612@posting.google.c om...
> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
> on the dana 35??? This is my most favoarable option (true-tracs front
> and rear), but i will bypass it if it definietly will not work. I
> understand that a Locker on dana 35 stock axle shafts is 100% out of
> the question with tires over 32-33", but how will a gear driven LSD
> work with 35s?
>
> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
> compressor alone, not including the added labor for the complex
> installation it probably requires (i got a quote for true-tracs
> front/rear, gears front/rear, and install kits for about the same cost
> as an arb super 35 with compressor alone!). I dont offroad everyday,
> but i do the jeep jamboree every year along with moderate NH/Ma
> offroading every other month.
>
> I think that LSDs would be more than enough for my needs, but if 35"
> tires on a dana 35 with a limited slip will definetly NOT work, than i
> will consider something else.
> Thanks again,
> Derek Proctor
Guest
Posts: n/a
Re: Jeep TJ dana 35 with limited slip and 35s? can it be done?
Go to the following link, kindly provided by Bill ------. It will tell you
all you need to know about Dana 35 axles.
http://www.----------.com/dana35c/
The best places for a Dana 35 are either in a smelter, being melted down to
make something useful, or at the bottom of a pond. (Please drained before
tossing into the pond. They make good fish habitiat.)
"Derek Proctor" <dirk44@aol.com> wrote in message
news:3ade3bcf.0410211641.61c0e612@posting.google.c om...
> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
> on the dana 35??? This is my most favoarable option (true-tracs front
> and rear), but i will bypass it if it definietly will not work. I
> understand that a Locker on dana 35 stock axle shafts is 100% out of
> the question with tires over 32-33", but how will a gear driven LSD
> work with 35s?
>
> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
> compressor alone, not including the added labor for the complex
> installation it probably requires (i got a quote for true-tracs
> front/rear, gears front/rear, and install kits for about the same cost
> as an arb super 35 with compressor alone!). I dont offroad everyday,
> but i do the jeep jamboree every year along with moderate NH/Ma
> offroading every other month.
>
> I think that LSDs would be more than enough for my needs, but if 35"
> tires on a dana 35 with a limited slip will definetly NOT work, than i
> will consider something else.
> Thanks again,
> Derek Proctor
all you need to know about Dana 35 axles.
http://www.----------.com/dana35c/
The best places for a Dana 35 are either in a smelter, being melted down to
make something useful, or at the bottom of a pond. (Please drained before
tossing into the pond. They make good fish habitiat.)
"Derek Proctor" <dirk44@aol.com> wrote in message
news:3ade3bcf.0410211641.61c0e612@posting.google.c om...
> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
> on the dana 35??? This is my most favoarable option (true-tracs front
> and rear), but i will bypass it if it definietly will not work. I
> understand that a Locker on dana 35 stock axle shafts is 100% out of
> the question with tires over 32-33", but how will a gear driven LSD
> work with 35s?
>
> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
> compressor alone, not including the added labor for the complex
> installation it probably requires (i got a quote for true-tracs
> front/rear, gears front/rear, and install kits for about the same cost
> as an arb super 35 with compressor alone!). I dont offroad everyday,
> but i do the jeep jamboree every year along with moderate NH/Ma
> offroading every other month.
>
> I think that LSDs would be more than enough for my needs, but if 35"
> tires on a dana 35 with a limited slip will definetly NOT work, than i
> will consider something else.
> Thanks again,
> Derek Proctor
Guest
Posts: n/a
Re: Jeep TJ dana 35 with limited slip and 35s? can it be done?
Go to the following link, kindly provided by Bill ------. It will tell you
all you need to know about Dana 35 axles.
http://www.----------.com/dana35c/
The best places for a Dana 35 are either in a smelter, being melted down to
make something useful, or at the bottom of a pond. (Please drained before
tossing into the pond. They make good fish habitiat.)
"Derek Proctor" <dirk44@aol.com> wrote in message
news:3ade3bcf.0410211641.61c0e612@posting.google.c om...
> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
> on the dana 35??? This is my most favoarable option (true-tracs front
> and rear), but i will bypass it if it definietly will not work. I
> understand that a Locker on dana 35 stock axle shafts is 100% out of
> the question with tires over 32-33", but how will a gear driven LSD
> work with 35s?
>
> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
> compressor alone, not including the added labor for the complex
> installation it probably requires (i got a quote for true-tracs
> front/rear, gears front/rear, and install kits for about the same cost
> as an arb super 35 with compressor alone!). I dont offroad everyday,
> but i do the jeep jamboree every year along with moderate NH/Ma
> offroading every other month.
>
> I think that LSDs would be more than enough for my needs, but if 35"
> tires on a dana 35 with a limited slip will definetly NOT work, than i
> will consider something else.
> Thanks again,
> Derek Proctor
all you need to know about Dana 35 axles.
http://www.----------.com/dana35c/
The best places for a Dana 35 are either in a smelter, being melted down to
make something useful, or at the bottom of a pond. (Please drained before
tossing into the pond. They make good fish habitiat.)
"Derek Proctor" <dirk44@aol.com> wrote in message
news:3ade3bcf.0410211641.61c0e612@posting.google.c om...
> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
> on the dana 35??? This is my most favoarable option (true-tracs front
> and rear), but i will bypass it if it definietly will not work. I
> understand that a Locker on dana 35 stock axle shafts is 100% out of
> the question with tires over 32-33", but how will a gear driven LSD
> work with 35s?
>
> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
> compressor alone, not including the added labor for the complex
> installation it probably requires (i got a quote for true-tracs
> front/rear, gears front/rear, and install kits for about the same cost
> as an arb super 35 with compressor alone!). I dont offroad everyday,
> but i do the jeep jamboree every year along with moderate NH/Ma
> offroading every other month.
>
> I think that LSDs would be more than enough for my needs, but if 35"
> tires on a dana 35 with a limited slip will definetly NOT work, than i
> will consider something else.
> Thanks again,
> Derek Proctor
Guest
Posts: n/a
Re: Jeep TJ dana 35 with limited slip and 35s? can it be done?
Come on, I've had one decorating the end of my driveway for 6 months,
quite distinctive, I'm the only one on the block with such an ornement, may
paint it pink.
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:clau9002vp3@enews1.newsguy.com...
> Go to the following link, kindly provided by Bill ------. It will tell you
> all you need to know about Dana 35 axles.
>
> http://www.----------.com/dana35c/
>
> The best places for a Dana 35 are either in a smelter, being melted down
> to make something useful, or at the bottom of a pond. (Please drained
> before tossing into the pond. They make good fish habitiat.)
>
> "Derek Proctor" <dirk44@aol.com> wrote in message
> news:3ade3bcf.0410211641.61c0e612@posting.google.c om...
>> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
>> on the dana 35??? This is my most favoarable option (true-tracs front
>> and rear), but i will bypass it if it definietly will not work. I
>> understand that a Locker on dana 35 stock axle shafts is 100% out of
>> the question with tires over 32-33", but how will a gear driven LSD
>> work with 35s?
>>
>> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
>> compressor alone, not including the added labor for the complex
>> installation it probably requires (i got a quote for true-tracs
>> front/rear, gears front/rear, and install kits for about the same cost
>> as an arb super 35 with compressor alone!). I dont offroad everyday,
>> but i do the jeep jamboree every year along with moderate NH/Ma
>> offroading every other month.
>>
>> I think that LSDs would be more than enough for my needs, but if 35"
>> tires on a dana 35 with a limited slip will definetly NOT work, than i
>> will consider something else.
>> Thanks again,
>> Derek Proctor
>
>
quite distinctive, I'm the only one on the block with such an ornement, may
paint it pink.
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:clau9002vp3@enews1.newsguy.com...
> Go to the following link, kindly provided by Bill ------. It will tell you
> all you need to know about Dana 35 axles.
>
> http://www.----------.com/dana35c/
>
> The best places for a Dana 35 are either in a smelter, being melted down
> to make something useful, or at the bottom of a pond. (Please drained
> before tossing into the pond. They make good fish habitiat.)
>
> "Derek Proctor" <dirk44@aol.com> wrote in message
> news:3ade3bcf.0410211641.61c0e612@posting.google.c om...
>> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
>> on the dana 35??? This is my most favoarable option (true-tracs front
>> and rear), but i will bypass it if it definietly will not work. I
>> understand that a Locker on dana 35 stock axle shafts is 100% out of
>> the question with tires over 32-33", but how will a gear driven LSD
>> work with 35s?
>>
>> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
>> compressor alone, not including the added labor for the complex
>> installation it probably requires (i got a quote for true-tracs
>> front/rear, gears front/rear, and install kits for about the same cost
>> as an arb super 35 with compressor alone!). I dont offroad everyday,
>> but i do the jeep jamboree every year along with moderate NH/Ma
>> offroading every other month.
>>
>> I think that LSDs would be more than enough for my needs, but if 35"
>> tires on a dana 35 with a limited slip will definetly NOT work, than i
>> will consider something else.
>> Thanks again,
>> Derek Proctor
>
>
Guest
Posts: n/a
Re: Jeep TJ dana 35 with limited slip and 35s? can it be done?
Come on, I've had one decorating the end of my driveway for 6 months,
quite distinctive, I'm the only one on the block with such an ornement, may
paint it pink.
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:clau9002vp3@enews1.newsguy.com...
> Go to the following link, kindly provided by Bill ------. It will tell you
> all you need to know about Dana 35 axles.
>
> http://www.----------.com/dana35c/
>
> The best places for a Dana 35 are either in a smelter, being melted down
> to make something useful, or at the bottom of a pond. (Please drained
> before tossing into the pond. They make good fish habitiat.)
>
> "Derek Proctor" <dirk44@aol.com> wrote in message
> news:3ade3bcf.0410211641.61c0e612@posting.google.c om...
>> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
>> on the dana 35??? This is my most favoarable option (true-tracs front
>> and rear), but i will bypass it if it definietly will not work. I
>> understand that a Locker on dana 35 stock axle shafts is 100% out of
>> the question with tires over 32-33", but how will a gear driven LSD
>> work with 35s?
>>
>> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
>> compressor alone, not including the added labor for the complex
>> installation it probably requires (i got a quote for true-tracs
>> front/rear, gears front/rear, and install kits for about the same cost
>> as an arb super 35 with compressor alone!). I dont offroad everyday,
>> but i do the jeep jamboree every year along with moderate NH/Ma
>> offroading every other month.
>>
>> I think that LSDs would be more than enough for my needs, but if 35"
>> tires on a dana 35 with a limited slip will definetly NOT work, than i
>> will consider something else.
>> Thanks again,
>> Derek Proctor
>
>
quite distinctive, I'm the only one on the block with such an ornement, may
paint it pink.
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:clau9002vp3@enews1.newsguy.com...
> Go to the following link, kindly provided by Bill ------. It will tell you
> all you need to know about Dana 35 axles.
>
> http://www.----------.com/dana35c/
>
> The best places for a Dana 35 are either in a smelter, being melted down
> to make something useful, or at the bottom of a pond. (Please drained
> before tossing into the pond. They make good fish habitiat.)
>
> "Derek Proctor" <dirk44@aol.com> wrote in message
> news:3ade3bcf.0410211641.61c0e612@posting.google.c om...
>> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
>> on the dana 35??? This is my most favoarable option (true-tracs front
>> and rear), but i will bypass it if it definietly will not work. I
>> understand that a Locker on dana 35 stock axle shafts is 100% out of
>> the question with tires over 32-33", but how will a gear driven LSD
>> work with 35s?
>>
>> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
>> compressor alone, not including the added labor for the complex
>> installation it probably requires (i got a quote for true-tracs
>> front/rear, gears front/rear, and install kits for about the same cost
>> as an arb super 35 with compressor alone!). I dont offroad everyday,
>> but i do the jeep jamboree every year along with moderate NH/Ma
>> offroading every other month.
>>
>> I think that LSDs would be more than enough for my needs, but if 35"
>> tires on a dana 35 with a limited slip will definetly NOT work, than i
>> will consider something else.
>> Thanks again,
>> Derek Proctor
>
>
Guest
Posts: n/a
Re: Jeep TJ dana 35 with limited slip and 35s? can it be done?
Come on, I've had one decorating the end of my driveway for 6 months,
quite distinctive, I'm the only one on the block with such an ornement, may
paint it pink.
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:clau9002vp3@enews1.newsguy.com...
> Go to the following link, kindly provided by Bill ------. It will tell you
> all you need to know about Dana 35 axles.
>
> http://www.----------.com/dana35c/
>
> The best places for a Dana 35 are either in a smelter, being melted down
> to make something useful, or at the bottom of a pond. (Please drained
> before tossing into the pond. They make good fish habitiat.)
>
> "Derek Proctor" <dirk44@aol.com> wrote in message
> news:3ade3bcf.0410211641.61c0e612@posting.google.c om...
>> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
>> on the dana 35??? This is my most favoarable option (true-tracs front
>> and rear), but i will bypass it if it definietly will not work. I
>> understand that a Locker on dana 35 stock axle shafts is 100% out of
>> the question with tires over 32-33", but how will a gear driven LSD
>> work with 35s?
>>
>> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
>> compressor alone, not including the added labor for the complex
>> installation it probably requires (i got a quote for true-tracs
>> front/rear, gears front/rear, and install kits for about the same cost
>> as an arb super 35 with compressor alone!). I dont offroad everyday,
>> but i do the jeep jamboree every year along with moderate NH/Ma
>> offroading every other month.
>>
>> I think that LSDs would be more than enough for my needs, but if 35"
>> tires on a dana 35 with a limited slip will definetly NOT work, than i
>> will consider something else.
>> Thanks again,
>> Derek Proctor
>
>
quite distinctive, I'm the only one on the block with such an ornement, may
paint it pink.
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:clau9002vp3@enews1.newsguy.com...
> Go to the following link, kindly provided by Bill ------. It will tell you
> all you need to know about Dana 35 axles.
>
> http://www.----------.com/dana35c/
>
> The best places for a Dana 35 are either in a smelter, being melted down
> to make something useful, or at the bottom of a pond. (Please drained
> before tossing into the pond. They make good fish habitiat.)
>
> "Derek Proctor" <dirk44@aol.com> wrote in message
> news:3ade3bcf.0410211641.61c0e612@posting.google.c om...
>> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
>> on the dana 35??? This is my most favoarable option (true-tracs front
>> and rear), but i will bypass it if it definietly will not work. I
>> understand that a Locker on dana 35 stock axle shafts is 100% out of
>> the question with tires over 32-33", but how will a gear driven LSD
>> work with 35s?
>>
>> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
>> compressor alone, not including the added labor for the complex
>> installation it probably requires (i got a quote for true-tracs
>> front/rear, gears front/rear, and install kits for about the same cost
>> as an arb super 35 with compressor alone!). I dont offroad everyday,
>> but i do the jeep jamboree every year along with moderate NH/Ma
>> offroading every other month.
>>
>> I think that LSDs would be more than enough for my needs, but if 35"
>> tires on a dana 35 with a limited slip will definetly NOT work, than i
>> will consider something else.
>> Thanks again,
>> Derek Proctor
>
>
Guest
Posts: n/a
Re: Jeep TJ dana 35 with limited slip and 35s? can it be done?
Hey Derek,
Nothing is definite. Many Jeeps run 33" or even 35" tires with lockers
on the Dana 35 and suffer no breakage. The key is how you drive.
The most common axle breaking situation, by far, is a steep climb on
rocks requiring heavy accelerator thus resulting in the tires bouncing
off the ground and coming down hard while spinning fast. A locker
multiplies the risk of breakage in that sort of situation. A LSD will
lock up when both tires have some traction, so in certain potential
break situations, it too will increase risk.
If you can avoid pedal pounding on steep and/or rough terrain, you may
well never break a Dana 35 axle with 35" tires and a True Trac. Just
remember that despite best intentions, it can be real hard to lay off
the pedal in heat of the moment. Worse yet, you'll alway have that
nagging worry that the next obstacle on the trail could be your last.
There are a few more expenses you should figure in when comparing costs
of keeping the Dana 35. First, budget for a set of spare axles from
the junkyard and make room in back to carry them. Having spares on hand
will make a broken axle significantly less painful.
Next, figure on some welding to firm up the flimsy Dana 35 housing. I
managed to spin my Dana 35 (open) pumpkin on the tubes last year when
hammering the gas in a vain attempt to get unstuck:
http://xjeep.dyndns.org/spundiff1.jpg
This can be prevented by welding the cast pumpkin to the steel tubes.
Also, the tube walls of the Dana 35 are real thin and are known to bend
with even moderate offroad use. This can lead to big trouble. The
prevention for that is to weld a truss to the tubes or buy bolt-on solution:
http://www.superioraxle.com/pdffolder/super3truss.pdf
Myself, I'm glad I ditched the Dana 35. Do you really need those 35"
tires now or can you wait until spring? If you truly want to save money
and you have some spare time, do your axle research and pick up a
suitable rear (and maybe a front too) from the junkyard for a few
hundred. Look for deals on gears and lockers. Learn how to setup gears
and take your time to do a benchtop rebuild in your garage or basement
over the winter.
Steve
http://xjeep.dyndns.org
Derek Proctor wrote:
> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
> on the dana 35??? This is my most favoarable option (true-tracs front
> and rear), but i will bypass it if it definietly will not work. I
> understand that a Locker on dana 35 stock axle shafts is 100% out of
> the question with tires over 32-33", but how will a gear driven LSD
> work with 35s?
>
> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
> compressor alone, not including the added labor for the complex
> installation it probably requires (i got a quote for true-tracs
> front/rear, gears front/rear, and install kits for about the same cost
> as an arb super 35 with compressor alone!). I dont offroad everyday,
> but i do the jeep jamboree every year along with moderate NH/Ma
> offroading every other month.
>
> I think that LSDs would be more than enough for my needs, but if 35"
> tires on a dana 35 with a limited slip will definetly NOT work, than i
> will consider something else.
> Thanks again,
> Derek Proctor
Nothing is definite. Many Jeeps run 33" or even 35" tires with lockers
on the Dana 35 and suffer no breakage. The key is how you drive.
The most common axle breaking situation, by far, is a steep climb on
rocks requiring heavy accelerator thus resulting in the tires bouncing
off the ground and coming down hard while spinning fast. A locker
multiplies the risk of breakage in that sort of situation. A LSD will
lock up when both tires have some traction, so in certain potential
break situations, it too will increase risk.
If you can avoid pedal pounding on steep and/or rough terrain, you may
well never break a Dana 35 axle with 35" tires and a True Trac. Just
remember that despite best intentions, it can be real hard to lay off
the pedal in heat of the moment. Worse yet, you'll alway have that
nagging worry that the next obstacle on the trail could be your last.
There are a few more expenses you should figure in when comparing costs
of keeping the Dana 35. First, budget for a set of spare axles from
the junkyard and make room in back to carry them. Having spares on hand
will make a broken axle significantly less painful.
Next, figure on some welding to firm up the flimsy Dana 35 housing. I
managed to spin my Dana 35 (open) pumpkin on the tubes last year when
hammering the gas in a vain attempt to get unstuck:
http://xjeep.dyndns.org/spundiff1.jpg
This can be prevented by welding the cast pumpkin to the steel tubes.
Also, the tube walls of the Dana 35 are real thin and are known to bend
with even moderate offroad use. This can lead to big trouble. The
prevention for that is to weld a truss to the tubes or buy bolt-on solution:
http://www.superioraxle.com/pdffolder/super3truss.pdf
Myself, I'm glad I ditched the Dana 35. Do you really need those 35"
tires now or can you wait until spring? If you truly want to save money
and you have some spare time, do your axle research and pick up a
suitable rear (and maybe a front too) from the junkyard for a few
hundred. Look for deals on gears and lockers. Learn how to setup gears
and take your time to do a benchtop rebuild in your garage or basement
over the winter.
Steve
http://xjeep.dyndns.org
Derek Proctor wrote:
> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
> on the dana 35??? This is my most favoarable option (true-tracs front
> and rear), but i will bypass it if it definietly will not work. I
> understand that a Locker on dana 35 stock axle shafts is 100% out of
> the question with tires over 32-33", but how will a gear driven LSD
> work with 35s?
>
> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
> compressor alone, not including the added labor for the complex
> installation it probably requires (i got a quote for true-tracs
> front/rear, gears front/rear, and install kits for about the same cost
> as an arb super 35 with compressor alone!). I dont offroad everyday,
> but i do the jeep jamboree every year along with moderate NH/Ma
> offroading every other month.
>
> I think that LSDs would be more than enough for my needs, but if 35"
> tires on a dana 35 with a limited slip will definetly NOT work, than i
> will consider something else.
> Thanks again,
> Derek Proctor
Guest
Posts: n/a
Re: Jeep TJ dana 35 with limited slip and 35s? can it be done?
Hey Derek,
Nothing is definite. Many Jeeps run 33" or even 35" tires with lockers
on the Dana 35 and suffer no breakage. The key is how you drive.
The most common axle breaking situation, by far, is a steep climb on
rocks requiring heavy accelerator thus resulting in the tires bouncing
off the ground and coming down hard while spinning fast. A locker
multiplies the risk of breakage in that sort of situation. A LSD will
lock up when both tires have some traction, so in certain potential
break situations, it too will increase risk.
If you can avoid pedal pounding on steep and/or rough terrain, you may
well never break a Dana 35 axle with 35" tires and a True Trac. Just
remember that despite best intentions, it can be real hard to lay off
the pedal in heat of the moment. Worse yet, you'll alway have that
nagging worry that the next obstacle on the trail could be your last.
There are a few more expenses you should figure in when comparing costs
of keeping the Dana 35. First, budget for a set of spare axles from
the junkyard and make room in back to carry them. Having spares on hand
will make a broken axle significantly less painful.
Next, figure on some welding to firm up the flimsy Dana 35 housing. I
managed to spin my Dana 35 (open) pumpkin on the tubes last year when
hammering the gas in a vain attempt to get unstuck:
http://xjeep.dyndns.org/spundiff1.jpg
This can be prevented by welding the cast pumpkin to the steel tubes.
Also, the tube walls of the Dana 35 are real thin and are known to bend
with even moderate offroad use. This can lead to big trouble. The
prevention for that is to weld a truss to the tubes or buy bolt-on solution:
http://www.superioraxle.com/pdffolder/super3truss.pdf
Myself, I'm glad I ditched the Dana 35. Do you really need those 35"
tires now or can you wait until spring? If you truly want to save money
and you have some spare time, do your axle research and pick up a
suitable rear (and maybe a front too) from the junkyard for a few
hundred. Look for deals on gears and lockers. Learn how to setup gears
and take your time to do a benchtop rebuild in your garage or basement
over the winter.
Steve
http://xjeep.dyndns.org
Derek Proctor wrote:
> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
> on the dana 35??? This is my most favoarable option (true-tracs front
> and rear), but i will bypass it if it definietly will not work. I
> understand that a Locker on dana 35 stock axle shafts is 100% out of
> the question with tires over 32-33", but how will a gear driven LSD
> work with 35s?
>
> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
> compressor alone, not including the added labor for the complex
> installation it probably requires (i got a quote for true-tracs
> front/rear, gears front/rear, and install kits for about the same cost
> as an arb super 35 with compressor alone!). I dont offroad everyday,
> but i do the jeep jamboree every year along with moderate NH/Ma
> offroading every other month.
>
> I think that LSDs would be more than enough for my needs, but if 35"
> tires on a dana 35 with a limited slip will definetly NOT work, than i
> will consider something else.
> Thanks again,
> Derek Proctor
Nothing is definite. Many Jeeps run 33" or even 35" tires with lockers
on the Dana 35 and suffer no breakage. The key is how you drive.
The most common axle breaking situation, by far, is a steep climb on
rocks requiring heavy accelerator thus resulting in the tires bouncing
off the ground and coming down hard while spinning fast. A locker
multiplies the risk of breakage in that sort of situation. A LSD will
lock up when both tires have some traction, so in certain potential
break situations, it too will increase risk.
If you can avoid pedal pounding on steep and/or rough terrain, you may
well never break a Dana 35 axle with 35" tires and a True Trac. Just
remember that despite best intentions, it can be real hard to lay off
the pedal in heat of the moment. Worse yet, you'll alway have that
nagging worry that the next obstacle on the trail could be your last.
There are a few more expenses you should figure in when comparing costs
of keeping the Dana 35. First, budget for a set of spare axles from
the junkyard and make room in back to carry them. Having spares on hand
will make a broken axle significantly less painful.
Next, figure on some welding to firm up the flimsy Dana 35 housing. I
managed to spin my Dana 35 (open) pumpkin on the tubes last year when
hammering the gas in a vain attempt to get unstuck:
http://xjeep.dyndns.org/spundiff1.jpg
This can be prevented by welding the cast pumpkin to the steel tubes.
Also, the tube walls of the Dana 35 are real thin and are known to bend
with even moderate offroad use. This can lead to big trouble. The
prevention for that is to weld a truss to the tubes or buy bolt-on solution:
http://www.superioraxle.com/pdffolder/super3truss.pdf
Myself, I'm glad I ditched the Dana 35. Do you really need those 35"
tires now or can you wait until spring? If you truly want to save money
and you have some spare time, do your axle research and pick up a
suitable rear (and maybe a front too) from the junkyard for a few
hundred. Look for deals on gears and lockers. Learn how to setup gears
and take your time to do a benchtop rebuild in your garage or basement
over the winter.
Steve
http://xjeep.dyndns.org
Derek Proctor wrote:
> So a detroit true-trac limited slip DEFINETLY will NOT work with 35s
> on the dana 35??? This is my most favoarable option (true-tracs front
> and rear), but i will bypass it if it definietly will not work. I
> understand that a Locker on dana 35 stock axle shafts is 100% out of
> the question with tires over 32-33", but how will a gear driven LSD
> work with 35s?
>
> ARBs sure are nice, but thats $1200+ for the rear locker/axle kit and
> compressor alone, not including the added labor for the complex
> installation it probably requires (i got a quote for true-tracs
> front/rear, gears front/rear, and install kits for about the same cost
> as an arb super 35 with compressor alone!). I dont offroad everyday,
> but i do the jeep jamboree every year along with moderate NH/Ma
> offroading every other month.
>
> I think that LSDs would be more than enough for my needs, but if 35"
> tires on a dana 35 with a limited slip will definetly NOT work, than i
> will consider something else.
> Thanks again,
> Derek Proctor