Kate

My Liberty was still at the dealership when I was there a few days ago.
I am headed back to town maybe as soon as tomorrow - no promises.
I will make a point of looking to see where he drilled and shoot you a photo
if I can.

Oh, and being the goofy broad that I am, you typed 'fog lights', I read
'running lights'.
Fog lights are a WHOLE different can of worms than the light bar on top that
I was thinking of. Duh!

Anyway, I'll see what I can do to help you from that end. I may even get
some techincal advice from ray or Joey in the shop.

You ought to just call the guys down at the service department, and ask
them. You never know, they might just tell you how, or even print you out a
set of destructions :)

Kate




"Ewan Scott" <ewanscott@btinternet.com> wrote in message
news:npfv32lvnsvurinj9cpd664944sh1os8lt@4ax.com...
: On Fri, 14 Apr 2006 10:18:22 -0500, "Kate" <Kate@dub.dub.dub.com
: (please ask)> wrote:
:
: >Whent hey installed the renegade lights on my Liberty, they drilled a
hole
: >in the firewall.
: >Do you not have the instructions or are they some aftermarlet that isn't
OEM
: >?
:
: Instructions? The company that I got the lights from realised that
: no-one reads instructions till something goes wrong. So to save money
: on the package they don't publish any fitting instructions :-)
:
:
: >There were a lot of things about the install that made me just take it in
: >and have it done.
: >I was glad I did, that way if I had a meltdown, it was covered.
: >
: That's a fair point. I would have fitted Jeep OEM fogs but.... they
: cost about $175 plus carriage, and tax this end. So from the US they
: cost me about $200.
:
: If I buy the same lights here they cost about £180, go figure.
:
: So, I buy cheaper aftermarket lights and mount them myself - I've had
: them working off the battery, shipped from the US at £48, a quarter of
: the price of a UK bought set.
:
: As for having them fitted professionally, well, it's a Jeep and if I
: went to the local Jeep Dealer to have them fitted I'd be looking at a
: workshop rate of anything between £50 and £90 per hour.
: I'm reluctant to drill a hole in the firewayy because - A/ I don't
: know what's on the other side, and B/ Even if I wanted to I'd have to
: remove too much gubbins from either side to get a drill in to do the
: job.
:
: If I go anywhere else, there is a very good chance that they won't
: know any more than I do because there aren't THAT many Liberty's
: about, a few, but not that many.
:
: Ewan Scott
: >
: >
: >"Ewan Scott" <ewanscott@btinternet.com> wrote in message
: >news:fn1v32pp83dk5noj6927t24iq968k1dmma@4ax.com.. .
: >: Okay, I've got the aftermarket foglights wired anf they would work if
: >: I connected them up direct to the battery - but I'd like to be legal
: >: and wire them to work on dipped beam. I'm told that there is a harness
: >: socket for the OEM foglights and that it is somewhere on the left side
: >: front wing/ fender.
: >:
: >: I've searched but can't find any unused terminal blocks. Just in case
: >: it is reversed for the RHD model I've checked on the right hand side
: >: but still no joy.
: >:
: >: Can anyone tell me where to find it - if it exists?
: >:
: >: Also, where have people fed accessory cables throught he firewall? I'm
: >: looking at the left hand side where the main harness comes through,
: >: but something keeps blocking any feed I put through.
: >:
: >: I don't want to drill any more holes, so any guidance would be
: >: welcome.
: >:
: >: Ewan Scott
: >

Kate

My Liberty was still at the dealership when I was there a few days ago.
I am headed back to town maybe as soon as tomorrow - no promises.
I will make a point of looking to see where he drilled and shoot you a photo
if I can.

Oh, and being the goofy broad that I am, you typed 'fog lights', I read
'running lights'.
Fog lights are a WHOLE different can of worms than the light bar on top that
I was thinking of. Duh!

Anyway, I'll see what I can do to help you from that end. I may even get
some techincal advice from ray or Joey in the shop.

You ought to just call the guys down at the service department, and ask
them. You never know, they might just tell you how, or even print you out a
set of destructions :)

Kate




"Ewan Scott" <ewanscott@btinternet.com> wrote in message
news:npfv32lvnsvurinj9cpd664944sh1os8lt@4ax.com...
: On Fri, 14 Apr 2006 10:18:22 -0500, "Kate" <Kate@dub.dub.dub.com
: (please ask)> wrote:
:
: >Whent hey installed the renegade lights on my Liberty, they drilled a
hole
: >in the firewall.
: >Do you not have the instructions or are they some aftermarlet that isn't
OEM
: >?
:
: Instructions? The company that I got the lights from realised that
: no-one reads instructions till something goes wrong. So to save money
: on the package they don't publish any fitting instructions :-)
:
:
: >There were a lot of things about the install that made me just take it in
: >and have it done.
: >I was glad I did, that way if I had a meltdown, it was covered.
: >
: That's a fair point. I would have fitted Jeep OEM fogs but.... they
: cost about $175 plus carriage, and tax this end. So from the US they
: cost me about $200.
:
: If I buy the same lights here they cost about £180, go figure.
:
: So, I buy cheaper aftermarket lights and mount them myself - I've had
: them working off the battery, shipped from the US at £48, a quarter of
: the price of a UK bought set.
:
: As for having them fitted professionally, well, it's a Jeep and if I
: went to the local Jeep Dealer to have them fitted I'd be looking at a
: workshop rate of anything between £50 and £90 per hour.
: I'm reluctant to drill a hole in the firewayy because - A/ I don't
: know what's on the other side, and B/ Even if I wanted to I'd have to
: remove too much gubbins from either side to get a drill in to do the
: job.
:
: If I go anywhere else, there is a very good chance that they won't
: know any more than I do because there aren't THAT many Liberty's
: about, a few, but not that many.
:
: Ewan Scott
: >
: >
: >"Ewan Scott" <ewanscott@btinternet.com> wrote in message
: >news:fn1v32pp83dk5noj6927t24iq968k1dmma@4ax.com.. .
: >: Okay, I've got the aftermarket foglights wired anf they would work if
: >: I connected them up direct to the battery - but I'd like to be legal
: >: and wire them to work on dipped beam. I'm told that there is a harness
: >: socket for the OEM foglights and that it is somewhere on the left side
: >: front wing/ fender.
: >:
: >: I've searched but can't find any unused terminal blocks. Just in case
: >: it is reversed for the RHD model I've checked on the right hand side
: >: but still no joy.
: >:
: >: Can anyone tell me where to find it - if it exists?
: >:
: >: Also, where have people fed accessory cables throught he firewall? I'm
: >: looking at the left hand side where the main harness comes through,
: >: but something keeps blocking any feed I put through.
: >:
: >: I don't want to drill any more holes, so any guidance would be
: >: welcome.
: >:
: >: Ewan Scott
: >