Re: Jeep Engine Stalls Just After Startup
Follow the link Bill: http://www.itwdelpro.com/battery.html
There are diagrams of how it works. There is more to it than just the pointy plastic rod. "L.W. (ßill) ------ III" <----------@cox.net> wrote in message news:412D253C.B68E13C0@cox.net... > I don't see how that would work, there's no fluid in the plastic > tube to act as a gravity tester, all it is a pointed cone at the end > that acts a prism. > God Bless America, ßill O|||||||O > mailto:-------------------- http://www.----------.com/ > > Mike Romain wrote: > > > > Over 2 volts Bill. The green ball moves both by fluid level and > > specific gravity so it actually does test the fluid as well as letting > > you know when low. > > > > Very much like the colored ball battery testers, remember them? It had > > X charge according to which ball floated at the top. > > > > Mike > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > > 88 Cherokee 235 BFG AT's |
Re: Jeep Engine Stalls Just After Startup
Chuck: Have you checked the pressure on the fuel rail? You may be running
high which would cause you to run over rich until you warmed up. The Regulator is vacuum operated and may be leaking. "Chuck Rowe" <none@fakeisp.com> wrote in message news:h6tqi0pmr16oi24bglmiq1el6p5n8urmdb@4ax.com... > But doesn't' the fact that I'm having no cranking problem steer the > possible cause away from the battery? > |
Re: Jeep Engine Stalls Just After Startup
Chuck: Have you checked the pressure on the fuel rail? You may be running
high which would cause you to run over rich until you warmed up. The Regulator is vacuum operated and may be leaking. "Chuck Rowe" <none@fakeisp.com> wrote in message news:h6tqi0pmr16oi24bglmiq1el6p5n8urmdb@4ax.com... > But doesn't' the fact that I'm having no cranking problem steer the > possible cause away from the battery? > |
Re: Jeep Engine Stalls Just After Startup
Chuck: Have you checked the pressure on the fuel rail? You may be running
high which would cause you to run over rich until you warmed up. The Regulator is vacuum operated and may be leaking. "Chuck Rowe" <none@fakeisp.com> wrote in message news:h6tqi0pmr16oi24bglmiq1el6p5n8urmdb@4ax.com... > But doesn't' the fact that I'm having no cranking problem steer the > possible cause away from the battery? > |
Re: Jeep Engine Stalls Just After Startup
Yes.
If you have cranking issues or starting while cranking issues, then the battery or main ground cable are suspect. Mike Chuck Rowe wrote: > > But doesn't' the fact that I'm having no cranking problem steer the > possible cause away from the battery? > > On Wed, 25 Aug 2004 15:07:57 -0400, Mike Romain <romainm@sympatico.ca> > wrote: > > > > >I had a delco with a green eye and still had 0 volts across the > >terminals. |
Re: Jeep Engine Stalls Just After Startup
Yes.
If you have cranking issues or starting while cranking issues, then the battery or main ground cable are suspect. Mike Chuck Rowe wrote: > > But doesn't' the fact that I'm having no cranking problem steer the > possible cause away from the battery? > > On Wed, 25 Aug 2004 15:07:57 -0400, Mike Romain <romainm@sympatico.ca> > wrote: > > > > >I had a delco with a green eye and still had 0 volts across the > >terminals. |
Re: Jeep Engine Stalls Just After Startup
Yes.
If you have cranking issues or starting while cranking issues, then the battery or main ground cable are suspect. Mike Chuck Rowe wrote: > > But doesn't' the fact that I'm having no cranking problem steer the > possible cause away from the battery? > > On Wed, 25 Aug 2004 15:07:57 -0400, Mike Romain <romainm@sympatico.ca> > wrote: > > > > >I had a delco with a green eye and still had 0 volts across the > >terminals. |
Re: Jeep Engine Stalls Just After Startup
Chuck Rowe wrote:
> > On Wed, 25 Aug 2004 22:38:19 -0700, L.W.(ßill) ------ III > <----------@cox.net> wrote: > > > Yup. > > God Bless America, ßill O|||||||O > >mailto:-------------------- http://www.----------.com/ > > > >Chuck Rowe wrote: > >> > >> But doesn't' the fact that I'm having no cranking problem steer the > >> possible cause away from the battery? > > Well, that being the case, I guess I'm stumped. I cleaned the TBA, > including IAP less than 2500 miles ago. I want to say that cleaning > helped for a little while, but things are deteriorating again. > > Aside from the simple spraying of the TBA and maybe a little > toothbrush assist, is there anything else I might try. > > Thanks in advance for all of your responses!! You can take a multimeter and check the TPS out for electrical dead spots. Put the meter on it set to ohms and with the TPS unplugged and engine off run it to full throttle by hand watching the resistance on the meter. If it gets jumpy or drops to 0, you have internal contact issues. Could be dirt or rust. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's |
Re: Jeep Engine Stalls Just After Startup
Chuck Rowe wrote:
> > On Wed, 25 Aug 2004 22:38:19 -0700, L.W.(ßill) ------ III > <----------@cox.net> wrote: > > > Yup. > > God Bless America, ßill O|||||||O > >mailto:-------------------- http://www.----------.com/ > > > >Chuck Rowe wrote: > >> > >> But doesn't' the fact that I'm having no cranking problem steer the > >> possible cause away from the battery? > > Well, that being the case, I guess I'm stumped. I cleaned the TBA, > including IAP less than 2500 miles ago. I want to say that cleaning > helped for a little while, but things are deteriorating again. > > Aside from the simple spraying of the TBA and maybe a little > toothbrush assist, is there anything else I might try. > > Thanks in advance for all of your responses!! You can take a multimeter and check the TPS out for electrical dead spots. Put the meter on it set to ohms and with the TPS unplugged and engine off run it to full throttle by hand watching the resistance on the meter. If it gets jumpy or drops to 0, you have internal contact issues. Could be dirt or rust. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's |
Re: Jeep Engine Stalls Just After Startup
Chuck Rowe wrote:
> > On Wed, 25 Aug 2004 22:38:19 -0700, L.W.(ßill) ------ III > <----------@cox.net> wrote: > > > Yup. > > God Bless America, ßill O|||||||O > >mailto:-------------------- http://www.----------.com/ > > > >Chuck Rowe wrote: > >> > >> But doesn't' the fact that I'm having no cranking problem steer the > >> possible cause away from the battery? > > Well, that being the case, I guess I'm stumped. I cleaned the TBA, > including IAP less than 2500 miles ago. I want to say that cleaning > helped for a little while, but things are deteriorating again. > > Aside from the simple spraying of the TBA and maybe a little > toothbrush assist, is there anything else I might try. > > Thanks in advance for all of your responses!! You can take a multimeter and check the TPS out for electrical dead spots. Put the meter on it set to ohms and with the TPS unplugged and engine off run it to full throttle by hand watching the resistance on the meter. If it gets jumpy or drops to 0, you have internal contact issues. Could be dirt or rust. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's |
All times are GMT -4. The time now is 12:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands