intake on 304
Guest
Posts: n/a
Re: intake on 304
It turns out that the instructions it says "Remove tin pan from bottom of
stock manifold and reinstall on new manifold with drive pins supplied with
kit."
My problem is I'm installing on a new motor - I don't have an old manifold
or the tin pan. I contacted edelbrock and they suggested I get one made or
buy an intake on ebay...I just bought an intake from edelbrock and I can't
even use it unless I have an old one to take parts from...it seems they
would have mentioned that somewhere in the advertising or on the box. Not
happy with edelbrock at the moment
..--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2mqcoeFq1eaiU1@uni-berlin.de...
> Which gasket should I use on a amc 304 with a edelbrock performer intake?
>
> Fel-Pro MS96011 - Valley pan gasket - $27
> Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21
> Mr Gasket MRG 800G - Standard intake gasket - $13
>
> The valley pan gasket says "if your engine requires it"? I don't know if
it
> requires it or not.
> _________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
stock manifold and reinstall on new manifold with drive pins supplied with
kit."
My problem is I'm installing on a new motor - I don't have an old manifold
or the tin pan. I contacted edelbrock and they suggested I get one made or
buy an intake on ebay...I just bought an intake from edelbrock and I can't
even use it unless I have an old one to take parts from...it seems they
would have mentioned that somewhere in the advertising or on the box. Not
happy with edelbrock at the moment
..--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2mqcoeFq1eaiU1@uni-berlin.de...
> Which gasket should I use on a amc 304 with a edelbrock performer intake?
>
> Fel-Pro MS96011 - Valley pan gasket - $27
> Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21
> Mr Gasket MRG 800G - Standard intake gasket - $13
>
> The valley pan gasket says "if your engine requires it"? I don't know if
it
> requires it or not.
> _________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
Guest
Posts: n/a
Re: intake on 304
It turns out that the instructions it says "Remove tin pan from bottom of
stock manifold and reinstall on new manifold with drive pins supplied with
kit."
My problem is I'm installing on a new motor - I don't have an old manifold
or the tin pan. I contacted edelbrock and they suggested I get one made or
buy an intake on ebay...I just bought an intake from edelbrock and I can't
even use it unless I have an old one to take parts from...it seems they
would have mentioned that somewhere in the advertising or on the box. Not
happy with edelbrock at the moment
..--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2mqcoeFq1eaiU1@uni-berlin.de...
> Which gasket should I use on a amc 304 with a edelbrock performer intake?
>
> Fel-Pro MS96011 - Valley pan gasket - $27
> Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21
> Mr Gasket MRG 800G - Standard intake gasket - $13
>
> The valley pan gasket says "if your engine requires it"? I don't know if
it
> requires it or not.
> _________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
stock manifold and reinstall on new manifold with drive pins supplied with
kit."
My problem is I'm installing on a new motor - I don't have an old manifold
or the tin pan. I contacted edelbrock and they suggested I get one made or
buy an intake on ebay...I just bought an intake from edelbrock and I can't
even use it unless I have an old one to take parts from...it seems they
would have mentioned that somewhere in the advertising or on the box. Not
happy with edelbrock at the moment
..--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2mqcoeFq1eaiU1@uni-berlin.de...
> Which gasket should I use on a amc 304 with a edelbrock performer intake?
>
> Fel-Pro MS96011 - Valley pan gasket - $27
> Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21
> Mr Gasket MRG 800G - Standard intake gasket - $13
>
> The valley pan gasket says "if your engine requires it"? I don't know if
it
> requires it or not.
> _________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
Guest
Posts: n/a
Re: intake on 304
It turns out that the instructions it says "Remove tin pan from bottom of
stock manifold and reinstall on new manifold with drive pins supplied with
kit."
My problem is I'm installing on a new motor - I don't have an old manifold
or the tin pan. I contacted edelbrock and they suggested I get one made or
buy an intake on ebay...I just bought an intake from edelbrock and I can't
even use it unless I have an old one to take parts from...it seems they
would have mentioned that somewhere in the advertising or on the box. Not
happy with edelbrock at the moment
..--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2mqcoeFq1eaiU1@uni-berlin.de...
> Which gasket should I use on a amc 304 with a edelbrock performer intake?
>
> Fel-Pro MS96011 - Valley pan gasket - $27
> Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21
> Mr Gasket MRG 800G - Standard intake gasket - $13
>
> The valley pan gasket says "if your engine requires it"? I don't know if
it
> requires it or not.
> _________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
stock manifold and reinstall on new manifold with drive pins supplied with
kit."
My problem is I'm installing on a new motor - I don't have an old manifold
or the tin pan. I contacted edelbrock and they suggested I get one made or
buy an intake on ebay...I just bought an intake from edelbrock and I can't
even use it unless I have an old one to take parts from...it seems they
would have mentioned that somewhere in the advertising or on the box. Not
happy with edelbrock at the moment
..--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2mqcoeFq1eaiU1@uni-berlin.de...
> Which gasket should I use on a amc 304 with a edelbrock performer intake?
>
> Fel-Pro MS96011 - Valley pan gasket - $27
> Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21
> Mr Gasket MRG 800G - Standard intake gasket - $13
>
> The valley pan gasket says "if your engine requires it"? I don't know if
it
> requires it or not.
> _________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
Guest
Posts: n/a
Re: intake on 304
Seeing your not going to use the EGR valve, why don't you see if
you may trade it for a manifold without the crossover:
http://www.competitionwarehouseusa.c...7470eff284bcb0'
Or make plates that block your crossover and keep the heat away from you
carburetor and oil.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
HomeBrewer wrote:
>
> It turns out that the instructions it says "Remove tin pan from bottom of
> stock manifold and reinstall on new manifold with drive pins supplied with
> kit."
>
> My problem is I'm installing on a new motor - I don't have an old manifold
> or the tin pan. I contacted edelbrock and they suggested I get one made or
> buy an intake on ebay...I just bought an intake from edelbrock and I can't
> even use it unless I have an old one to take parts from...it seems they
> would have mentioned that somewhere in the advertising or on the box. Not
> happy with edelbrock at the moment
>
> .--
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2mqcoeFq1eaiU1@uni-berlin.de...
> > Which gasket should I use on a amc 304 with a edelbrock performer intake?
> >
> > Fel-Pro MS96011 - Valley pan gasket - $27
> > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21
> > Mr Gasket MRG 800G - Standard intake gasket - $13
> >
> > The valley pan gasket says "if your engine requires it"? I don't know if
> it
> > requires it or not.
> > _________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
you may trade it for a manifold without the crossover:
http://www.competitionwarehouseusa.c...7470eff284bcb0'
Or make plates that block your crossover and keep the heat away from you
carburetor and oil.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
HomeBrewer wrote:
>
> It turns out that the instructions it says "Remove tin pan from bottom of
> stock manifold and reinstall on new manifold with drive pins supplied with
> kit."
>
> My problem is I'm installing on a new motor - I don't have an old manifold
> or the tin pan. I contacted edelbrock and they suggested I get one made or
> buy an intake on ebay...I just bought an intake from edelbrock and I can't
> even use it unless I have an old one to take parts from...it seems they
> would have mentioned that somewhere in the advertising or on the box. Not
> happy with edelbrock at the moment
>
> .--
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2mqcoeFq1eaiU1@uni-berlin.de...
> > Which gasket should I use on a amc 304 with a edelbrock performer intake?
> >
> > Fel-Pro MS96011 - Valley pan gasket - $27
> > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21
> > Mr Gasket MRG 800G - Standard intake gasket - $13
> >
> > The valley pan gasket says "if your engine requires it"? I don't know if
> it
> > requires it or not.
> > _________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
Guest
Posts: n/a
Re: intake on 304
Seeing your not going to use the EGR valve, why don't you see if
you may trade it for a manifold without the crossover:
http://www.competitionwarehouseusa.c...7470eff284bcb0'
Or make plates that block your crossover and keep the heat away from you
carburetor and oil.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
HomeBrewer wrote:
>
> It turns out that the instructions it says "Remove tin pan from bottom of
> stock manifold and reinstall on new manifold with drive pins supplied with
> kit."
>
> My problem is I'm installing on a new motor - I don't have an old manifold
> or the tin pan. I contacted edelbrock and they suggested I get one made or
> buy an intake on ebay...I just bought an intake from edelbrock and I can't
> even use it unless I have an old one to take parts from...it seems they
> would have mentioned that somewhere in the advertising or on the box. Not
> happy with edelbrock at the moment
>
> .--
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2mqcoeFq1eaiU1@uni-berlin.de...
> > Which gasket should I use on a amc 304 with a edelbrock performer intake?
> >
> > Fel-Pro MS96011 - Valley pan gasket - $27
> > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21
> > Mr Gasket MRG 800G - Standard intake gasket - $13
> >
> > The valley pan gasket says "if your engine requires it"? I don't know if
> it
> > requires it or not.
> > _________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
you may trade it for a manifold without the crossover:
http://www.competitionwarehouseusa.c...7470eff284bcb0'
Or make plates that block your crossover and keep the heat away from you
carburetor and oil.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
HomeBrewer wrote:
>
> It turns out that the instructions it says "Remove tin pan from bottom of
> stock manifold and reinstall on new manifold with drive pins supplied with
> kit."
>
> My problem is I'm installing on a new motor - I don't have an old manifold
> or the tin pan. I contacted edelbrock and they suggested I get one made or
> buy an intake on ebay...I just bought an intake from edelbrock and I can't
> even use it unless I have an old one to take parts from...it seems they
> would have mentioned that somewhere in the advertising or on the box. Not
> happy with edelbrock at the moment
>
> .--
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2mqcoeFq1eaiU1@uni-berlin.de...
> > Which gasket should I use on a amc 304 with a edelbrock performer intake?
> >
> > Fel-Pro MS96011 - Valley pan gasket - $27
> > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21
> > Mr Gasket MRG 800G - Standard intake gasket - $13
> >
> > The valley pan gasket says "if your engine requires it"? I don't know if
> it
> > requires it or not.
> > _________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
Guest
Posts: n/a
Re: intake on 304
Seeing your not going to use the EGR valve, why don't you see if
you may trade it for a manifold without the crossover:
http://www.competitionwarehouseusa.c...7470eff284bcb0'
Or make plates that block your crossover and keep the heat away from you
carburetor and oil.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
HomeBrewer wrote:
>
> It turns out that the instructions it says "Remove tin pan from bottom of
> stock manifold and reinstall on new manifold with drive pins supplied with
> kit."
>
> My problem is I'm installing on a new motor - I don't have an old manifold
> or the tin pan. I contacted edelbrock and they suggested I get one made or
> buy an intake on ebay...I just bought an intake from edelbrock and I can't
> even use it unless I have an old one to take parts from...it seems they
> would have mentioned that somewhere in the advertising or on the box. Not
> happy with edelbrock at the moment
>
> .--
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2mqcoeFq1eaiU1@uni-berlin.de...
> > Which gasket should I use on a amc 304 with a edelbrock performer intake?
> >
> > Fel-Pro MS96011 - Valley pan gasket - $27
> > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21
> > Mr Gasket MRG 800G - Standard intake gasket - $13
> >
> > The valley pan gasket says "if your engine requires it"? I don't know if
> it
> > requires it or not.
> > _________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
you may trade it for a manifold without the crossover:
http://www.competitionwarehouseusa.c...7470eff284bcb0'
Or make plates that block your crossover and keep the heat away from you
carburetor and oil.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
HomeBrewer wrote:
>
> It turns out that the instructions it says "Remove tin pan from bottom of
> stock manifold and reinstall on new manifold with drive pins supplied with
> kit."
>
> My problem is I'm installing on a new motor - I don't have an old manifold
> or the tin pan. I contacted edelbrock and they suggested I get one made or
> buy an intake on ebay...I just bought an intake from edelbrock and I can't
> even use it unless I have an old one to take parts from...it seems they
> would have mentioned that somewhere in the advertising or on the box. Not
> happy with edelbrock at the moment
>
> .--
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2mqcoeFq1eaiU1@uni-berlin.de...
> > Which gasket should I use on a amc 304 with a edelbrock performer intake?
> >
> > Fel-Pro MS96011 - Valley pan gasket - $27
> > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21
> > Mr Gasket MRG 800G - Standard intake gasket - $13
> >
> > The valley pan gasket says "if your engine requires it"? I don't know if
> it
> > requires it or not.
> > _________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
Guest
Posts: n/a
Re: intake on 304
Seeing your not going to use the EGR valve, why don't you see if
you may trade it for a manifold without the crossover:
http://www.competitionwarehouseusa.c...7470eff284bcb0'
Or make plates that block your crossover and keep the heat away from you
carburetor and oil.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
HomeBrewer wrote:
>
> It turns out that the instructions it says "Remove tin pan from bottom of
> stock manifold and reinstall on new manifold with drive pins supplied with
> kit."
>
> My problem is I'm installing on a new motor - I don't have an old manifold
> or the tin pan. I contacted edelbrock and they suggested I get one made or
> buy an intake on ebay...I just bought an intake from edelbrock and I can't
> even use it unless I have an old one to take parts from...it seems they
> would have mentioned that somewhere in the advertising or on the box. Not
> happy with edelbrock at the moment
>
> .--
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2mqcoeFq1eaiU1@uni-berlin.de...
> > Which gasket should I use on a amc 304 with a edelbrock performer intake?
> >
> > Fel-Pro MS96011 - Valley pan gasket - $27
> > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21
> > Mr Gasket MRG 800G - Standard intake gasket - $13
> >
> > The valley pan gasket says "if your engine requires it"? I don't know if
> it
> > requires it or not.
> > _________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
you may trade it for a manifold without the crossover:
http://www.competitionwarehouseusa.c...7470eff284bcb0'
Or make plates that block your crossover and keep the heat away from you
carburetor and oil.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
HomeBrewer wrote:
>
> It turns out that the instructions it says "Remove tin pan from bottom of
> stock manifold and reinstall on new manifold with drive pins supplied with
> kit."
>
> My problem is I'm installing on a new motor - I don't have an old manifold
> or the tin pan. I contacted edelbrock and they suggested I get one made or
> buy an intake on ebay...I just bought an intake from edelbrock and I can't
> even use it unless I have an old one to take parts from...it seems they
> would have mentioned that somewhere in the advertising or on the box. Not
> happy with edelbrock at the moment
>
> .--
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2mqcoeFq1eaiU1@uni-berlin.de...
> > Which gasket should I use on a amc 304 with a edelbrock performer intake?
> >
> > Fel-Pro MS96011 - Valley pan gasket - $27
> > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21
> > Mr Gasket MRG 800G - Standard intake gasket - $13
> >
> > The valley pan gasket says "if your engine requires it"? I don't know if
> it
> > requires it or not.
> > _________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
