installing Mopar cruise control on 03 Wrangler
#21
Guest
Posts: n/a
Re: installing Mopar cruise control on 03 Wrangler
Well it took me 45 mins, and I'm not claiming to be anything other than
average. It may take a bit longer if you have to use the patch cable.
The airbag takes less than 10 mins to move - disconnect the battery,
and it's only a few bolts...
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"AWD" <ADulay-NOSPAM-@compuserve.com> wrote in message
news:c5k3tm$4m9$1@ngspool-d02.news.aol.com...
> Thomas,
>
> Pay the $150 and have it done right.
>
> You will not get this done in 3 hours. A decent Jeep shop will.
>
> The airbag has to be "moved" as well as the steering wheel and, if
truly
> done correctly, the wiring harness needs to be pinned and jumpered.
>
> I took a good hard look at it, determined that I couldn't get it done
in
> a day and dropped it off at my local dealer.
>
> Ate lunch, had some margaritas and it was done.
>
> Well worth the money TO ME.
>
> Your mileage may vary.
>
> It works very well on those I-75 trips down to the Keys.
>
> AD
>
>
average. It may take a bit longer if you have to use the patch cable.
The airbag takes less than 10 mins to move - disconnect the battery,
and it's only a few bolts...
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"AWD" <ADulay-NOSPAM-@compuserve.com> wrote in message
news:c5k3tm$4m9$1@ngspool-d02.news.aol.com...
> Thomas,
>
> Pay the $150 and have it done right.
>
> You will not get this done in 3 hours. A decent Jeep shop will.
>
> The airbag has to be "moved" as well as the steering wheel and, if
truly
> done correctly, the wiring harness needs to be pinned and jumpered.
>
> I took a good hard look at it, determined that I couldn't get it done
in
> a day and dropped it off at my local dealer.
>
> Ate lunch, had some margaritas and it was done.
>
> Well worth the money TO ME.
>
> Your mileage may vary.
>
> It works very well on those I-75 trips down to the Keys.
>
> AD
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)