Installing manual locking hubs 99 wrangler
08-28-2007, 08:01 PM
#51
Guest
Posts: n/a
Re: Re: Installing manual locking hubs 99 wrangler
On Tue, 28 Aug 2007 18:46:42 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>He has a 99 so his front end is full time, no disconnect.
I knew they did that but was not sure when they switched over. There
simply is no excuse for them to sell Jeeps of that type that way just
to save a few bucks building them. Chysler has not done Jeep any
favors on this.
-----------------
TheSnoMan.com
wrote:
>He has a 99 so his front end is full time, no disconnect.
I knew they did that but was not sure when they switched over. There
simply is no excuse for them to sell Jeeps of that type that way just
to save a few bucks building them. Chysler has not done Jeep any
favors on this.
-----------------
TheSnoMan.com
08-28-2007, 08:01 PM
#52
Guest
Posts: n/a
Re: Re: Installing manual locking hubs 99 wrangler
On Tue, 28 Aug 2007 18:46:42 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>He has a 99 so his front end is full time, no disconnect.
I knew they did that but was not sure when they switched over. There
simply is no excuse for them to sell Jeeps of that type that way just
to save a few bucks building them. Chysler has not done Jeep any
favors on this.
-----------------
TheSnoMan.com
wrote:
>He has a 99 so his front end is full time, no disconnect.
I knew they did that but was not sure when they switched over. There
simply is no excuse for them to sell Jeeps of that type that way just
to save a few bucks building them. Chysler has not done Jeep any
favors on this.
-----------------
TheSnoMan.com
08-28-2007, 08:01 PM
#53
Guest
Posts: n/a
Re: Re: Installing manual locking hubs 99 wrangler
On Tue, 28 Aug 2007 18:46:42 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>He has a 99 so his front end is full time, no disconnect.
I knew they did that but was not sure when they switched over. There
simply is no excuse for them to sell Jeeps of that type that way just
to save a few bucks building them. Chysler has not done Jeep any
favors on this.
-----------------
TheSnoMan.com
wrote:
>He has a 99 so his front end is full time, no disconnect.
I knew they did that but was not sure when they switched over. There
simply is no excuse for them to sell Jeeps of that type that way just
to save a few bucks building them. Chysler has not done Jeep any
favors on this.
-----------------
TheSnoMan.com
08-30-2007, 09:52 PM
#54
Guest
Posts: n/a
Re: Installing manual locking hubs 99 wrangler
No, locking hubs and lockers are not the same.
You need a locker, you do not need locking hubs.
"Jamie Mello" <carkeyscc@sbcglobal.net> wrote in message
news:1188235027.747803.225620@q4g2000prc.googlegro ups.com...
> Hi there I have a 99 wrangler I am looking to installing a pair of
> manual locking hubs in the front axle.(dana 30)
> And wanted to know how hard it was to install? And are manual locking
> hubs the same as manual locking lockers? I am new to some of this
> stuff as you may see.
>
> Thanks Jamie any help would be very nice
>
You need a locker, you do not need locking hubs.
"Jamie Mello" <carkeyscc@sbcglobal.net> wrote in message
news:1188235027.747803.225620@q4g2000prc.googlegro ups.com...
> Hi there I have a 99 wrangler I am looking to installing a pair of
> manual locking hubs in the front axle.(dana 30)
> And wanted to know how hard it was to install? And are manual locking
> hubs the same as manual locking lockers? I am new to some of this
> stuff as you may see.
>
> Thanks Jamie any help would be very nice
>
08-30-2007, 09:52 PM
#55
Guest
Posts: n/a
Re: Installing manual locking hubs 99 wrangler
No, locking hubs and lockers are not the same.
You need a locker, you do not need locking hubs.
"Jamie Mello" <carkeyscc@sbcglobal.net> wrote in message
news:1188235027.747803.225620@q4g2000prc.googlegro ups.com...
> Hi there I have a 99 wrangler I am looking to installing a pair of
> manual locking hubs in the front axle.(dana 30)
> And wanted to know how hard it was to install? And are manual locking
> hubs the same as manual locking lockers? I am new to some of this
> stuff as you may see.
>
> Thanks Jamie any help would be very nice
>
You need a locker, you do not need locking hubs.
"Jamie Mello" <carkeyscc@sbcglobal.net> wrote in message
news:1188235027.747803.225620@q4g2000prc.googlegro ups.com...
> Hi there I have a 99 wrangler I am looking to installing a pair of
> manual locking hubs in the front axle.(dana 30)
> And wanted to know how hard it was to install? And are manual locking
> hubs the same as manual locking lockers? I am new to some of this
> stuff as you may see.
>
> Thanks Jamie any help would be very nice
>
08-30-2007, 09:52 PM
#56
Guest
Posts: n/a
Re: Installing manual locking hubs 99 wrangler
No, locking hubs and lockers are not the same.
You need a locker, you do not need locking hubs.
"Jamie Mello" <carkeyscc@sbcglobal.net> wrote in message
news:1188235027.747803.225620@q4g2000prc.googlegro ups.com...
> Hi there I have a 99 wrangler I am looking to installing a pair of
> manual locking hubs in the front axle.(dana 30)
> And wanted to know how hard it was to install? And are manual locking
> hubs the same as manual locking lockers? I am new to some of this
> stuff as you may see.
>
> Thanks Jamie any help would be very nice
>
You need a locker, you do not need locking hubs.
"Jamie Mello" <carkeyscc@sbcglobal.net> wrote in message
news:1188235027.747803.225620@q4g2000prc.googlegro ups.com...
> Hi there I have a 99 wrangler I am looking to installing a pair of
> manual locking hubs in the front axle.(dana 30)
> And wanted to know how hard it was to install? And are manual locking
> hubs the same as manual locking lockers? I am new to some of this
> stuff as you may see.
>
> Thanks Jamie any help would be very nice
>
08-30-2007, 09:52 PM
#57
Guest
Posts: n/a
Re: Installing manual locking hubs 99 wrangler
No, locking hubs and lockers are not the same.
You need a locker, you do not need locking hubs.
"Jamie Mello" <carkeyscc@sbcglobal.net> wrote in message
news:1188235027.747803.225620@q4g2000prc.googlegro ups.com...
> Hi there I have a 99 wrangler I am looking to installing a pair of
> manual locking hubs in the front axle.(dana 30)
> And wanted to know how hard it was to install? And are manual locking
> hubs the same as manual locking lockers? I am new to some of this
> stuff as you may see.
>
> Thanks Jamie any help would be very nice
>
You need a locker, you do not need locking hubs.
"Jamie Mello" <carkeyscc@sbcglobal.net> wrote in message
news:1188235027.747803.225620@q4g2000prc.googlegro ups.com...
> Hi there I have a 99 wrangler I am looking to installing a pair of
> manual locking hubs in the front axle.(dana 30)
> And wanted to know how hard it was to install? And are manual locking
> hubs the same as manual locking lockers? I am new to some of this
> stuff as you may see.
>
> Thanks Jamie any help would be very nice
>
09-01-2007, 07:24 PM
#58
Guest
Posts: n/a
Re: Installing manual locking hubs 99 wrangler
I know manual locking hubs are not the same as lockers now. But if I
want to install a full locker in front (dana 30). And if I do not
install some kind of manual locking hubs I would have the effect of
the locker full time I herd? Is this ture?????
want to install a full locker in front (dana 30). And if I do not
install some kind of manual locking hubs I would have the effect of
the locker full time I herd? Is this ture?????
09-01-2007, 07:24 PM
#59
Guest
Posts: n/a
Re: Installing manual locking hubs 99 wrangler
I know manual locking hubs are not the same as lockers now. But if I
want to install a full locker in front (dana 30). And if I do not
install some kind of manual locking hubs I would have the effect of
the locker full time I herd? Is this ture?????
want to install a full locker in front (dana 30). And if I do not
install some kind of manual locking hubs I would have the effect of
the locker full time I herd? Is this ture?????
09-01-2007, 07:24 PM
#60
Guest
Posts: n/a
Re: Installing manual locking hubs 99 wrangler
I know manual locking hubs are not the same as lockers now. But if I
want to install a full locker in front (dana 30). And if I do not
install some kind of manual locking hubs I would have the effect of
the locker full time I herd? Is this ture?????
want to install a full locker in front (dana 30). And if I do not
install some kind of manual locking hubs I would have the effect of
the locker full time I herd? Is this ture?????
