Re: Installing manual locking hubs 99 wrangler
 

I guess at first I was thinking it was a manual locker. But it would
be nice to have a 2 wheel drive low. The reason is that I want to
install a locker up front and I think manual hubs would nice to have.

Re: Installing manual locking hubs 99 wrangler
 

I guess at first I was thinking it was a manual locker. But it would
be nice to have a 2 wheel drive low. The reason is that I want to
install a locker up front and I think manual hubs would nice to have.

Re: Installing manual locking hubs 99 wrangler
 

I guess at first I was thinking it was a manual locker. But it would
be nice to have a 2 wheel drive low. The reason is that I want to
install a locker up front and I think manual hubs would nice to have.

Re: Installing manual locking hubs 99 wrangler
 

Jamie Mello wrote:
> Thanks all of you. I was not sure if the hubs were the same as lockers
> or not. I have a warn m8000 winch. I was looking at a few MPG more and
> 2 Wheel low would also be nice. How munch would it cost to get it
> installed? And does anyone know of a cheap good hubs I can get? I also
> have a extra pair of rims around here for the jeep. They said they
> were from a 87 YJ. They are 15 inch The rims I have now are from a
> 2005 jeep I was told and are 16 inch. I will have to get new tires it
> looks like to.
>

You will need to find out what the hubs take for rims. They changed the
bolt pattern in 86/87.

I would use google and search for conversion kits.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Re: Installing manual locking hubs 99 wrangler
 

Jamie Mello wrote:
> Thanks all of you. I was not sure if the hubs were the same as lockers
> or not. I have a warn m8000 winch. I was looking at a few MPG more and
> 2 Wheel low would also be nice. How munch would it cost to get it
> installed? And does anyone know of a cheap good hubs I can get? I also
> have a extra pair of rims around here for the jeep. They said they
> were from a 87 YJ. They are 15 inch The rims I have now are from a
> 2005 jeep I was told and are 16 inch. I will have to get new tires it
> looks like to.
>

You will need to find out what the hubs take for rims. They changed the
bolt pattern in 86/87.

I would use google and search for conversion kits.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Re: Installing manual locking hubs 99 wrangler
 

Jamie Mello wrote:
> Thanks all of you. I was not sure if the hubs were the same as lockers
> or not. I have a warn m8000 winch. I was looking at a few MPG more and
> 2 Wheel low would also be nice. How munch would it cost to get it
> installed? And does anyone know of a cheap good hubs I can get? I also
> have a extra pair of rims around here for the jeep. They said they
> were from a 87 YJ. They are 15 inch The rims I have now are from a
> 2005 jeep I was told and are 16 inch. I will have to get new tires it
> looks like to.
>

You will need to find out what the hubs take for rims. They changed the
bolt pattern in 86/87.

I would use google and search for conversion kits.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Re: Installing manual locking hubs 99 wrangler
 

Jamie Mello wrote:
> Thanks all of you. I was not sure if the hubs were the same as lockers
> or not. I have a warn m8000 winch. I was looking at a few MPG more and
> 2 Wheel low would also be nice. How munch would it cost to get it
> installed? And does anyone know of a cheap good hubs I can get? I also
> have a extra pair of rims around here for the jeep. They said they
> were from a 87 YJ. They are 15 inch The rims I have now are from a
> 2005 jeep I was told and are 16 inch. I will have to get new tires it
> looks like to.
>

You will need to find out what the hubs take for rims. They changed the
bolt pattern in 86/87.

I would use google and search for conversion kits.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Re: Installing manual locking hubs 99 wrangler
 

I will do that Thank you

Re: Installing manual locking hubs 99 wrangler
 

I will do that Thank you

Re: Installing manual locking hubs 99 wrangler
 

I will do that Thank you