installing control arms
#51
Guest
Posts: n/a
Re: installing control arms
I just need to get everything back together at this point. I'll be doing
this mod (or something very like it) in the near future and will worry about
repositioning things at that time.
http://www.jeepforum.com/forum/showp...02&postcount=1
n.
"Paul Keating" <pkeating@nospam.ca> wrote in message
news:A87Ud.62484$Am3.2064089@news20.bellglobal.com ...
>
> I ran my DT3000's can up in the rear.
> You still have to reposition the axle side mounts, as the can may hit the
> axle at full stuff.
>
> Paul
>
> L.W.(ßill) ------ III wrote:
>> Hi Nathan,
>> The DT3000 will be pumping air. Here they switched to DT8000 to be
>> able to run upside down: http://www.4x4xplor.com/DT8000.html Or you
>> could reposition their mounts.
this mod (or something very like it) in the near future and will worry about
repositioning things at that time.
http://www.jeepforum.com/forum/showp...02&postcount=1
n.
"Paul Keating" <pkeating@nospam.ca> wrote in message
news:A87Ud.62484$Am3.2064089@news20.bellglobal.com ...
>
> I ran my DT3000's can up in the rear.
> You still have to reposition the axle side mounts, as the can may hit the
> axle at full stuff.
>
> Paul
>
> L.W.(ßill) ------ III wrote:
>> Hi Nathan,
>> The DT3000 will be pumping air. Here they switched to DT8000 to be
>> able to run upside down: http://www.4x4xplor.com/DT8000.html Or you
>> could reposition their mounts.
#52
Guest
Posts: n/a
Re: installing control arms
I just need to get everything back together at this point. I'll be doing
this mod (or something very like it) in the near future and will worry about
repositioning things at that time.
http://www.jeepforum.com/forum/showp...02&postcount=1
n.
"Paul Keating" <pkeating@nospam.ca> wrote in message
news:A87Ud.62484$Am3.2064089@news20.bellglobal.com ...
>
> I ran my DT3000's can up in the rear.
> You still have to reposition the axle side mounts, as the can may hit the
> axle at full stuff.
>
> Paul
>
> L.W.(ßill) ------ III wrote:
>> Hi Nathan,
>> The DT3000 will be pumping air. Here they switched to DT8000 to be
>> able to run upside down: http://www.4x4xplor.com/DT8000.html Or you
>> could reposition their mounts.
this mod (or something very like it) in the near future and will worry about
repositioning things at that time.
http://www.jeepforum.com/forum/showp...02&postcount=1
n.
"Paul Keating" <pkeating@nospam.ca> wrote in message
news:A87Ud.62484$Am3.2064089@news20.bellglobal.com ...
>
> I ran my DT3000's can up in the rear.
> You still have to reposition the axle side mounts, as the can may hit the
> axle at full stuff.
>
> Paul
>
> L.W.(ßill) ------ III wrote:
>> Hi Nathan,
>> The DT3000 will be pumping air. Here they switched to DT8000 to be
>> able to run upside down: http://www.4x4xplor.com/DT8000.html Or you
>> could reposition their mounts.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)