is this how it's supposed to look?
#11
Guest
Posts: n/a
Re: is this how it's supposed to look?
Those are the synchros. You should be noticing that the gears are a little
rough when going from one to the next.
"serg" <none@none.com> wrote in message
news:a0%lc.60330$Km4.53807@newssvr25.news.prodigy. com...
> hey there everybody-finally took my t-176 apart and looked at the gears
for
> chipped teeth, cracks, etc. i noticed that all the gears have what looks
> like a worn area on the little teeth that sit next to the synchros. the
> gear teeth that are next to this "worn out" area also look different than
> the rest. the thing is, there are similar teeth on the other side of the
> gear, at 180 degrees. this makes me think that it's normal and i
shouldn't
> worry. i didn't find any metal shavings at the bottom of the case. go
here
> to see a couple of pix. thanks!
>
> http://tinyurl.com/32ho7
>
>
rough when going from one to the next.
"serg" <none@none.com> wrote in message
news:a0%lc.60330$Km4.53807@newssvr25.news.prodigy. com...
> hey there everybody-finally took my t-176 apart and looked at the gears
for
> chipped teeth, cracks, etc. i noticed that all the gears have what looks
> like a worn area on the little teeth that sit next to the synchros. the
> gear teeth that are next to this "worn out" area also look different than
> the rest. the thing is, there are similar teeth on the other side of the
> gear, at 180 degrees. this makes me think that it's normal and i
shouldn't
> worry. i didn't find any metal shavings at the bottom of the case. go
here
> to see a couple of pix. thanks!
>
> http://tinyurl.com/32ho7
>
>
#12
Guest
Posts: n/a
Re: is this how it's supposed to look?
Those are the synchros. You should be noticing that the gears are a little
rough when going from one to the next.
"serg" <none@none.com> wrote in message
news:a0%lc.60330$Km4.53807@newssvr25.news.prodigy. com...
> hey there everybody-finally took my t-176 apart and looked at the gears
for
> chipped teeth, cracks, etc. i noticed that all the gears have what looks
> like a worn area on the little teeth that sit next to the synchros. the
> gear teeth that are next to this "worn out" area also look different than
> the rest. the thing is, there are similar teeth on the other side of the
> gear, at 180 degrees. this makes me think that it's normal and i
shouldn't
> worry. i didn't find any metal shavings at the bottom of the case. go
here
> to see a couple of pix. thanks!
>
> http://tinyurl.com/32ho7
>
>
rough when going from one to the next.
"serg" <none@none.com> wrote in message
news:a0%lc.60330$Km4.53807@newssvr25.news.prodigy. com...
> hey there everybody-finally took my t-176 apart and looked at the gears
for
> chipped teeth, cracks, etc. i noticed that all the gears have what looks
> like a worn area on the little teeth that sit next to the synchros. the
> gear teeth that are next to this "worn out" area also look different than
> the rest. the thing is, there are similar teeth on the other side of the
> gear, at 180 degrees. this makes me think that it's normal and i
shouldn't
> worry. i didn't find any metal shavings at the bottom of the case. go
here
> to see a couple of pix. thanks!
>
> http://tinyurl.com/32ho7
>
>
#13
Guest
Posts: n/a
Re: is this how it's supposed to look?
Those are the synchros. You should be noticing that the gears are a little
rough when going from one to the next.
"serg" <none@none.com> wrote in message
news:a0%lc.60330$Km4.53807@newssvr25.news.prodigy. com...
> hey there everybody-finally took my t-176 apart and looked at the gears
for
> chipped teeth, cracks, etc. i noticed that all the gears have what looks
> like a worn area on the little teeth that sit next to the synchros. the
> gear teeth that are next to this "worn out" area also look different than
> the rest. the thing is, there are similar teeth on the other side of the
> gear, at 180 degrees. this makes me think that it's normal and i
shouldn't
> worry. i didn't find any metal shavings at the bottom of the case. go
here
> to see a couple of pix. thanks!
>
> http://tinyurl.com/32ho7
>
>
rough when going from one to the next.
"serg" <none@none.com> wrote in message
news:a0%lc.60330$Km4.53807@newssvr25.news.prodigy. com...
> hey there everybody-finally took my t-176 apart and looked at the gears
for
> chipped teeth, cracks, etc. i noticed that all the gears have what looks
> like a worn area on the little teeth that sit next to the synchros. the
> gear teeth that are next to this "worn out" area also look different than
> the rest. the thing is, there are similar teeth on the other side of the
> gear, at 180 degrees. this makes me think that it's normal and i
shouldn't
> worry. i didn't find any metal shavings at the bottom of the case. go
here
> to see a couple of pix. thanks!
>
> http://tinyurl.com/32ho7
>
>
#14
Guest
Posts: n/a
Re: is this how it's supposed to look?
thanks guys!
i'm going to be changing all the seals and bearings too.
"serg" <none@none.com> wrote in message
news:a0%lc.60330$Km4.53807@newssvr25.news.prodigy. com...
> hey there everybody-finally took my t-176 apart and looked at the gears
for
> chipped teeth, cracks, etc. i noticed that all the gears have what looks
> like a worn area on the little teeth that sit next to the synchros. the
> gear teeth that are next to this "worn out" area also look different than
> the rest. the thing is, there are similar teeth on the other side of the
> gear, at 180 degrees. this makes me think that it's normal and i
shouldn't
> worry. i didn't find any metal shavings at the bottom of the case. go
here
> to see a couple of pix. thanks!
>
> http://tinyurl.com/32ho7
>
>
i'm going to be changing all the seals and bearings too.
"serg" <none@none.com> wrote in message
news:a0%lc.60330$Km4.53807@newssvr25.news.prodigy. com...
> hey there everybody-finally took my t-176 apart and looked at the gears
for
> chipped teeth, cracks, etc. i noticed that all the gears have what looks
> like a worn area on the little teeth that sit next to the synchros. the
> gear teeth that are next to this "worn out" area also look different than
> the rest. the thing is, there are similar teeth on the other side of the
> gear, at 180 degrees. this makes me think that it's normal and i
shouldn't
> worry. i didn't find any metal shavings at the bottom of the case. go
here
> to see a couple of pix. thanks!
>
> http://tinyurl.com/32ho7
>
>
#15
Guest
Posts: n/a
Re: is this how it's supposed to look?
thanks guys!
i'm going to be changing all the seals and bearings too.
"serg" <none@none.com> wrote in message
news:a0%lc.60330$Km4.53807@newssvr25.news.prodigy. com...
> hey there everybody-finally took my t-176 apart and looked at the gears
for
> chipped teeth, cracks, etc. i noticed that all the gears have what looks
> like a worn area on the little teeth that sit next to the synchros. the
> gear teeth that are next to this "worn out" area also look different than
> the rest. the thing is, there are similar teeth on the other side of the
> gear, at 180 degrees. this makes me think that it's normal and i
shouldn't
> worry. i didn't find any metal shavings at the bottom of the case. go
here
> to see a couple of pix. thanks!
>
> http://tinyurl.com/32ho7
>
>
i'm going to be changing all the seals and bearings too.
"serg" <none@none.com> wrote in message
news:a0%lc.60330$Km4.53807@newssvr25.news.prodigy. com...
> hey there everybody-finally took my t-176 apart and looked at the gears
for
> chipped teeth, cracks, etc. i noticed that all the gears have what looks
> like a worn area on the little teeth that sit next to the synchros. the
> gear teeth that are next to this "worn out" area also look different than
> the rest. the thing is, there are similar teeth on the other side of the
> gear, at 180 degrees. this makes me think that it's normal and i
shouldn't
> worry. i didn't find any metal shavings at the bottom of the case. go
here
> to see a couple of pix. thanks!
>
> http://tinyurl.com/32ho7
>
>
#16
Guest
Posts: n/a
Re: is this how it's supposed to look?
thanks guys!
i'm going to be changing all the seals and bearings too.
"serg" <none@none.com> wrote in message
news:a0%lc.60330$Km4.53807@newssvr25.news.prodigy. com...
> hey there everybody-finally took my t-176 apart and looked at the gears
for
> chipped teeth, cracks, etc. i noticed that all the gears have what looks
> like a worn area on the little teeth that sit next to the synchros. the
> gear teeth that are next to this "worn out" area also look different than
> the rest. the thing is, there are similar teeth on the other side of the
> gear, at 180 degrees. this makes me think that it's normal and i
shouldn't
> worry. i didn't find any metal shavings at the bottom of the case. go
here
> to see a couple of pix. thanks!
>
> http://tinyurl.com/32ho7
>
>
i'm going to be changing all the seals and bearings too.
"serg" <none@none.com> wrote in message
news:a0%lc.60330$Km4.53807@newssvr25.news.prodigy. com...
> hey there everybody-finally took my t-176 apart and looked at the gears
for
> chipped teeth, cracks, etc. i noticed that all the gears have what looks
> like a worn area on the little teeth that sit next to the synchros. the
> gear teeth that are next to this "worn out" area also look different than
> the rest. the thing is, there are similar teeth on the other side of the
> gear, at 180 degrees. this makes me think that it's normal and i
shouldn't
> worry. i didn't find any metal shavings at the bottom of the case. go
here
> to see a couple of pix. thanks!
>
> http://tinyurl.com/32ho7
>
>
#17
Guest
Posts: n/a
Re: is this how it's supposed to look?
thanks guys!
i'm going to be changing all the seals and bearings too.
"serg" <none@none.com> wrote in message
news:a0%lc.60330$Km4.53807@newssvr25.news.prodigy. com...
> hey there everybody-finally took my t-176 apart and looked at the gears
for
> chipped teeth, cracks, etc. i noticed that all the gears have what looks
> like a worn area on the little teeth that sit next to the synchros. the
> gear teeth that are next to this "worn out" area also look different than
> the rest. the thing is, there are similar teeth on the other side of the
> gear, at 180 degrees. this makes me think that it's normal and i
shouldn't
> worry. i didn't find any metal shavings at the bottom of the case. go
here
> to see a couple of pix. thanks!
>
> http://tinyurl.com/32ho7
>
>
i'm going to be changing all the seals and bearings too.
"serg" <none@none.com> wrote in message
news:a0%lc.60330$Km4.53807@newssvr25.news.prodigy. com...
> hey there everybody-finally took my t-176 apart and looked at the gears
for
> chipped teeth, cracks, etc. i noticed that all the gears have what looks
> like a worn area on the little teeth that sit next to the synchros. the
> gear teeth that are next to this "worn out" area also look different than
> the rest. the thing is, there are similar teeth on the other side of the
> gear, at 180 degrees. this makes me think that it's normal and i
shouldn't
> worry. i didn't find any metal shavings at the bottom of the case. go
here
> to see a couple of pix. thanks!
>
> http://tinyurl.com/32ho7
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Re: Hey Llewellyn "Where are all those Harley pictures you where supposed to post last month, LIAR!"
=?iso-8859-1?q?=A7qu=40r3_Wh33=A3s?=
Jeep Mailing List
9
12-10-2006 11:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)