I was trying to fit my new tailpipe in and there wasn't enough room (the
hangers wont squeeze past the track bar and the floor) so I thought I'd
just drop it for a few minutes... So I snapped the bolt (frame side) and
got the nut off the axle side but the axle side bolt wont pound out. It
spins and the bar moves so it's not just bound up, is there a retaining
clip in there? or a puller needed? Also anyone know if it's okay to
replace the OEM torx head bolts with a grade 8 or is the OEM bolt
specifically hardened for the track bar? My haynes manual doesn't show a
retainer but there's a piece of metal with two little holes in the
bottom between the axle side mount, it swivels so I'm guessing this is
the hang up.

Of course only after I got this far into it did it dawn on me that I
could have just jacked the thing up to maybe get enough space to squeeze
the tail pipe through. But no big deal; from the looks of the bolt I
snapped they needed replacing anyway.

 

Uh...I forgot how this works (which side) but just jack up one side higher than
the other...this will free up the bar and it will come out easy.

Brian
88 YJ

 

Uh...I forgot how this works (which side) but just jack up one side higher than
the other...this will free up the bar and it will come out easy.

Brian
88 YJ

 

Uh...I forgot how this works (which side) but just jack up one side higher than
the other...this will free up the bar and it will come out easy.

Brian
88 YJ

 

I got the tailpipe in (jacking up the frame gave me just enough room).
While I was under it I took a "pickle fork" to the head of the bolt that
wont come out. Couldn't get it off.. I'm guessing from the lack of
replies; that there isn't supposed to be a retainer of any sort in their
(axle side rear track bar mount) The bushings are so cruded up and
pushed out that I can't see in there to figure out what sort of retainer
it is; or how it's supposed to be removed. It appears to be a little
bracket with two small holes in the bottom that is sandwitched between
(inside) the track bar mount, with the track bar itself in between the
two flanges of this retainer (or what I think is a retainer).

Anyone with an 88 YJ come across anything like this? I've got the nut
off, pounding it didn't work, the fork didn't manage to pull it out...
and all the while the freaking track bar is loose and movable... leading
me to think there's some sort of retainer.

 

I got the tailpipe in (jacking up the frame gave me just enough room).
While I was under it I took a "pickle fork" to the head of the bolt that
wont come out. Couldn't get it off.. I'm guessing from the lack of
replies; that there isn't supposed to be a retainer of any sort in their
(axle side rear track bar mount) The bushings are so cruded up and
pushed out that I can't see in there to figure out what sort of retainer
it is; or how it's supposed to be removed. It appears to be a little
bracket with two small holes in the bottom that is sandwitched between
(inside) the track bar mount, with the track bar itself in between the
two flanges of this retainer (or what I think is a retainer).

Anyone with an 88 YJ come across anything like this? I've got the nut
off, pounding it didn't work, the fork didn't manage to pull it out...
and all the while the freaking track bar is loose and movable... leading
me to think there's some sort of retainer.

 

I got the tailpipe in (jacking up the frame gave me just enough room).
While I was under it I took a "pickle fork" to the head of the bolt that
wont come out. Couldn't get it off.. I'm guessing from the lack of
replies; that there isn't supposed to be a retainer of any sort in their
(axle side rear track bar mount) The bushings are so cruded up and
pushed out that I can't see in there to figure out what sort of retainer
it is; or how it's supposed to be removed. It appears to be a little
bracket with two small holes in the bottom that is sandwitched between
(inside) the track bar mount, with the track bar itself in between the
two flanges of this retainer (or what I think is a retainer).

Anyone with an 88 YJ come across anything like this? I've got the nut
off, pounding it didn't work, the fork didn't manage to pull it out...
and all the while the freaking track bar is loose and movable... leading
me to think there's some sort of retainer.

 

Wranglerjeep1 wrote:
> Uh...I forgot how this works (which side) but just jack up one side higher than
> the other...this will free up the bar and it will come out easy.

Problem is I can't actually get the bolt on the axle side mount to come
out. I can jack it up and get the frame side out (I snapped that
bolt)... Hmmm maybe the axle side bolt is worn so much that I have to
take the load off it to get the flattened part to unbind.. I'll try that.

 

Wranglerjeep1 wrote:
> Uh...I forgot how this works (which side) but just jack up one side higher than
> the other...this will free up the bar and it will come out easy.

Problem is I can't actually get the bolt on the axle side mount to come
out. I can jack it up and get the frame side out (I snapped that
bolt)... Hmmm maybe the axle side bolt is worn so much that I have to
take the load off it to get the flattened part to unbind.. I'll try that.

 

Wranglerjeep1 wrote:
> Uh...I forgot how this works (which side) but just jack up one side higher than
> the other...this will free up the bar and it will come out easy.

Problem is I can't actually get the bolt on the axle side mount to come
out. I can jack it up and get the frame side out (I snapped that
bolt)... Hmmm maybe the axle side bolt is worn so much that I have to
take the load off it to get the flattened part to unbind.. I'll try that.