jdarg wrote:
> The bolt in mine was worn to the point where it did have a flat edge - I had
> to cut off the head of the bolt and pound the heck out of it to get it out
> because of that. It just wouldn't budge the other way at all. It was the
> bolt on the frame side though, the axle side came out relatively easily.

Yeah I snapped that one, it was worn flat the axle side was also so this
turned out to be the problem... I would have figured it out quicker but
the bolt was spinning, and the track bar was moving back and forth in
the slot but still the bolt wouldn't budge even with a pickle fork on
the bolt head and 2 pound hammer on the other end. I just had to relieve
the tension like everyone suggested. Thanks everyone.

 

jdarg wrote:
> The bolt in mine was worn to the point where it did have a flat edge - I had
> to cut off the head of the bolt and pound the heck out of it to get it out
> because of that. It just wouldn't budge the other way at all. It was the
> bolt on the frame side though, the axle side came out relatively easily.

Yeah I snapped that one, it was worn flat the axle side was also so this
turned out to be the problem... I would have figured it out quicker but
the bolt was spinning, and the track bar was moving back and forth in
the slot but still the bolt wouldn't budge even with a pickle fork on
the bolt head and 2 pound hammer on the other end. I just had to relieve
the tension like everyone suggested. Thanks everyone.