Hey Mike and or Bill
03-15-2005, 10:56 PM
#21
Guest
Posts: n/a
Re: Hey Mike and or Bill
And were to get the seals?
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
> Bill, The leak is where the steering column goes into the steering box.
> The
> pitman arm should not need to be disturbed.
>
> Mike Romain says the seals can be put in while the box is still mounted,
> all
> you have to do is pull the steering column and the seals will come off
> over
> the small shaft that the steering column is attached to.
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:4237949F.9DF30719@***.net...
>> Sorry, I was thinking pump, you still need the pitman arm puller,
>> try to find a shop with American tools, as it must be forged.
>>
>> "L.W.(ßill) ------ III" wrote:
>> >
>> > Hi Greg,
>> > Any of your local parts stores, that have a machine shop will have
>> > it. A Google search:
>> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
>> > rent/buy a puller for the pulley, and just replace that seal in place,
>> > works for me.
>> > God Bless America, ßill O|||||||O
>> > mailto:-------------------- http://www.----------.com/
>
>
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
> Bill, The leak is where the steering column goes into the steering box.
> The
> pitman arm should not need to be disturbed.
>
> Mike Romain says the seals can be put in while the box is still mounted,
> all
> you have to do is pull the steering column and the seals will come off
> over
> the small shaft that the steering column is attached to.
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:4237949F.9DF30719@***.net...
>> Sorry, I was thinking pump, you still need the pitman arm puller,
>> try to find a shop with American tools, as it must be forged.
>>
>> "L.W.(ßill) ------ III" wrote:
>> >
>> > Hi Greg,
>> > Any of your local parts stores, that have a machine shop will have
>> > it. A Google search:
>> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
>> > rent/buy a puller for the pulley, and just replace that seal in place,
>> > works for me.
>> > God Bless America, ßill O|||||||O
>> > mailto:-------------------- http://www.----------.com/
>
>
03-15-2005, 10:56 PM
#22
Guest
Posts: n/a
Re: Hey Mike and or Bill
And were to get the seals?
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
> Bill, The leak is where the steering column goes into the steering box.
> The
> pitman arm should not need to be disturbed.
>
> Mike Romain says the seals can be put in while the box is still mounted,
> all
> you have to do is pull the steering column and the seals will come off
> over
> the small shaft that the steering column is attached to.
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:4237949F.9DF30719@***.net...
>> Sorry, I was thinking pump, you still need the pitman arm puller,
>> try to find a shop with American tools, as it must be forged.
>>
>> "L.W.(ßill) ------ III" wrote:
>> >
>> > Hi Greg,
>> > Any of your local parts stores, that have a machine shop will have
>> > it. A Google search:
>> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
>> > rent/buy a puller for the pulley, and just replace that seal in place,
>> > works for me.
>> > God Bless America, ßill O|||||||O
>> > mailto:-------------------- http://www.----------.com/
>
>
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
> Bill, The leak is where the steering column goes into the steering box.
> The
> pitman arm should not need to be disturbed.
>
> Mike Romain says the seals can be put in while the box is still mounted,
> all
> you have to do is pull the steering column and the seals will come off
> over
> the small shaft that the steering column is attached to.
>
>
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:4237949F.9DF30719@***.net...
>> Sorry, I was thinking pump, you still need the pitman arm puller,
>> try to find a shop with American tools, as it must be forged.
>>
>> "L.W.(ßill) ------ III" wrote:
>> >
>> > Hi Greg,
>> > Any of your local parts stores, that have a machine shop will have
>> > it. A Google search:
>> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
>> > rent/buy a puller for the pulley, and just replace that seal in place,
>> > works for me.
>> > God Bless America, ßill O|||||||O
>> > mailto:-------------------- http://www.----------.com/
>
>
03-15-2005, 11:28 PM
#23
Guest
Posts: n/a
Re: Hey Mike and or Bill
Got my Bronco to do first. What I have found that will postpone
fixing it, is to spray it with gasoline, then wash it off with your
garden hose pressure nozzle. Swells the seal and washes out any dirt
particles holding it open.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> Can you come over and do mine? It has been leaking for a very long time and
> the path of least resistance is to carry a bottle of power steering fluid.
fixing it, is to spray it with gasoline, then wash it off with your
garden hose pressure nozzle. Swells the seal and washes out any dirt
particles holding it open.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> Can you come over and do mine? It has been leaking for a very long time and
> the path of least resistance is to carry a bottle of power steering fluid.
03-15-2005, 11:28 PM
#24
Guest
Posts: n/a
Re: Hey Mike and or Bill
Got my Bronco to do first. What I have found that will postpone
fixing it, is to spray it with gasoline, then wash it off with your
garden hose pressure nozzle. Swells the seal and washes out any dirt
particles holding it open.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> Can you come over and do mine? It has been leaking for a very long time and
> the path of least resistance is to carry a bottle of power steering fluid.
fixing it, is to spray it with gasoline, then wash it off with your
garden hose pressure nozzle. Swells the seal and washes out any dirt
particles holding it open.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> Can you come over and do mine? It has been leaking for a very long time and
> the path of least resistance is to carry a bottle of power steering fluid.
03-15-2005, 11:28 PM
#25
Guest
Posts: n/a
Re: Hey Mike and or Bill
Got my Bronco to do first. What I have found that will postpone
fixing it, is to spray it with gasoline, then wash it off with your
garden hose pressure nozzle. Swells the seal and washes out any dirt
particles holding it open.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> Can you come over and do mine? It has been leaking for a very long time and
> the path of least resistance is to carry a bottle of power steering fluid.
fixing it, is to spray it with gasoline, then wash it off with your
garden hose pressure nozzle. Swells the seal and washes out any dirt
particles holding it open.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> Can you come over and do mine? It has been leaking for a very long time and
> the path of least resistance is to carry a bottle of power steering fluid.
03-16-2005, 09:29 AM
#26
Guest
Posts: n/a
Re: Hey Mike and or Bill
I just checked and Canadian Tire sells the input seal for $16.00 and the
other various seals if needed or a whole kit.
I just unbolt the box and drop it down to change the front seal leaving
everything hooked up to it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> I asked a while ago about seals for the power steering on my 81 CJ7, one
> of you gave a site with a seal kit, think it was $17.00, anyway time to quit
> topping it up every outing and fix it, it's the seal were the steering shaft
> goes in, anyway if someone knows were to get the seal kit I'd appreciate it.
other various seals if needed or a whole kit.
I just unbolt the box and drop it down to change the front seal leaving
everything hooked up to it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> I asked a while ago about seals for the power steering on my 81 CJ7, one
> of you gave a site with a seal kit, think it was $17.00, anyway time to quit
> topping it up every outing and fix it, it's the seal were the steering shaft
> goes in, anyway if someone knows were to get the seal kit I'd appreciate it.
03-16-2005, 09:29 AM
#27
Guest
Posts: n/a
Re: Hey Mike and or Bill
I just checked and Canadian Tire sells the input seal for $16.00 and the
other various seals if needed or a whole kit.
I just unbolt the box and drop it down to change the front seal leaving
everything hooked up to it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> I asked a while ago about seals for the power steering on my 81 CJ7, one
> of you gave a site with a seal kit, think it was $17.00, anyway time to quit
> topping it up every outing and fix it, it's the seal were the steering shaft
> goes in, anyway if someone knows were to get the seal kit I'd appreciate it.
other various seals if needed or a whole kit.
I just unbolt the box and drop it down to change the front seal leaving
everything hooked up to it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> I asked a while ago about seals for the power steering on my 81 CJ7, one
> of you gave a site with a seal kit, think it was $17.00, anyway time to quit
> topping it up every outing and fix it, it's the seal were the steering shaft
> goes in, anyway if someone knows were to get the seal kit I'd appreciate it.
03-16-2005, 09:29 AM
#28
Guest
Posts: n/a
Re: Hey Mike and or Bill
I just checked and Canadian Tire sells the input seal for $16.00 and the
other various seals if needed or a whole kit.
I just unbolt the box and drop it down to change the front seal leaving
everything hooked up to it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> I asked a while ago about seals for the power steering on my 81 CJ7, one
> of you gave a site with a seal kit, think it was $17.00, anyway time to quit
> topping it up every outing and fix it, it's the seal were the steering shaft
> goes in, anyway if someone knows were to get the seal kit I'd appreciate it.
other various seals if needed or a whole kit.
I just unbolt the box and drop it down to change the front seal leaving
everything hooked up to it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> I asked a while ago about seals for the power steering on my 81 CJ7, one
> of you gave a site with a seal kit, think it was $17.00, anyway time to quit
> topping it up every outing and fix it, it's the seal were the steering shaft
> goes in, anyway if someone knows were to get the seal kit I'd appreciate it.
03-16-2005, 10:11 AM
#29
Guest
Posts: n/a
Re: Hey Mike and or Bill
Thanks, was going to check them today but didn't think they would come
though, guess you don't remember their part # for when I go and the 16 year
old says a what for a what? They are not known for having intelligent parts
people at the best of times, but all the staff have changed here in the last
month so I have to train them all again :)
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:423842D3.BA0F13F2@sympatico.ca...
>I just checked and Canadian Tire sells the input seal for $16.00 and the
> other various seals if needed or a whole kit.
>
> I just unbolt the box and drop it down to change the front seal leaving
> everything hooked up to it.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Greg wrote:
>>
>> I asked a while ago about seals for the power steering on my 81 CJ7,
>> one
>> of you gave a site with a seal kit, think it was $17.00, anyway time to
>> quit
>> topping it up every outing and fix it, it's the seal were the steering
>> shaft
>> goes in, anyway if someone knows were to get the seal kit I'd appreciate
>> it.
though, guess you don't remember their part # for when I go and the 16 year
old says a what for a what? They are not known for having intelligent parts
people at the best of times, but all the staff have changed here in the last
month so I have to train them all again :)
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:423842D3.BA0F13F2@sympatico.ca...
>I just checked and Canadian Tire sells the input seal for $16.00 and the
> other various seals if needed or a whole kit.
>
> I just unbolt the box and drop it down to change the front seal leaving
> everything hooked up to it.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Greg wrote:
>>
>> I asked a while ago about seals for the power steering on my 81 CJ7,
>> one
>> of you gave a site with a seal kit, think it was $17.00, anyway time to
>> quit
>> topping it up every outing and fix it, it's the seal were the steering
>> shaft
>> goes in, anyway if someone knows were to get the seal kit I'd appreciate
>> it.
03-16-2005, 10:11 AM
#30
Guest
Posts: n/a
Re: Hey Mike and or Bill
Thanks, was going to check them today but didn't think they would come
though, guess you don't remember their part # for when I go and the 16 year
old says a what for a what? They are not known for having intelligent parts
people at the best of times, but all the staff have changed here in the last
month so I have to train them all again :)
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:423842D3.BA0F13F2@sympatico.ca...
>I just checked and Canadian Tire sells the input seal for $16.00 and the
> other various seals if needed or a whole kit.
>
> I just unbolt the box and drop it down to change the front seal leaving
> everything hooked up to it.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Greg wrote:
>>
>> I asked a while ago about seals for the power steering on my 81 CJ7,
>> one
>> of you gave a site with a seal kit, think it was $17.00, anyway time to
>> quit
>> topping it up every outing and fix it, it's the seal were the steering
>> shaft
>> goes in, anyway if someone knows were to get the seal kit I'd appreciate
>> it.
though, guess you don't remember their part # for when I go and the 16 year
old says a what for a what? They are not known for having intelligent parts
people at the best of times, but all the staff have changed here in the last
month so I have to train them all again :)
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:423842D3.BA0F13F2@sympatico.ca...
>I just checked and Canadian Tire sells the input seal for $16.00 and the
> other various seals if needed or a whole kit.
>
> I just unbolt the box and drop it down to change the front seal leaving
> everything hooked up to it.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Greg wrote:
>>
>> I asked a while ago about seals for the power steering on my 81 CJ7,
>> one
>> of you gave a site with a seal kit, think it was $17.00, anyway time to
>> quit
>> topping it up every outing and fix it, it's the seal were the steering
>> shaft
>> goes in, anyway if someone knows were to get the seal kit I'd appreciate
>> it.
