Hey Mike and or Bill
Guest
Posts: n/a
Re: Hey Mike and or Bill
Thanks, was going to check them today but didn't think they would come
though, guess you don't remember their part # for when I go and the 16 year
old says a what for a what? They are not known for having intelligent parts
people at the best of times, but all the staff have changed here in the last
month so I have to train them all again :)
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:423842D3.BA0F13F2@sympatico.ca...
>I just checked and Canadian Tire sells the input seal for $16.00 and the
> other various seals if needed or a whole kit.
>
> I just unbolt the box and drop it down to change the front seal leaving
> everything hooked up to it.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Greg wrote:
>>
>> I asked a while ago about seals for the power steering on my 81 CJ7,
>> one
>> of you gave a site with a seal kit, think it was $17.00, anyway time to
>> quit
>> topping it up every outing and fix it, it's the seal were the steering
>> shaft
>> goes in, anyway if someone knows were to get the seal kit I'd appreciate
>> it.
though, guess you don't remember their part # for when I go and the 16 year
old says a what for a what? They are not known for having intelligent parts
people at the best of times, but all the staff have changed here in the last
month so I have to train them all again :)
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:423842D3.BA0F13F2@sympatico.ca...
>I just checked and Canadian Tire sells the input seal for $16.00 and the
> other various seals if needed or a whole kit.
>
> I just unbolt the box and drop it down to change the front seal leaving
> everything hooked up to it.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Greg wrote:
>>
>> I asked a while ago about seals for the power steering on my 81 CJ7,
>> one
>> of you gave a site with a seal kit, think it was $17.00, anyway time to
>> quit
>> topping it up every outing and fix it, it's the seal were the steering
>> shaft
>> goes in, anyway if someone knows were to get the seal kit I'd appreciate
>> it.
Guest
Posts: n/a
Re: Hey Mike and or Bill
Got the same problem here. The good parts guy is gone and the last time
I got a part number off the bozo I was talking to on the phone, he got
it wrong so I didn't bother asking him this time.
Too bad to, the local CT used to be a great one, now they only have one
brain dead fool on parts. I wonder if they know how much business he
has driven away?
Mike
Greg wrote:
>
> Thanks, was going to check them today but didn't think they would come
> though, guess you don't remember their part # for when I go and the 16 year
> old says a what for a what? They are not known for having intelligent parts
> people at the best of times, but all the staff have changed here in the last
> month so I have to train them all again :)
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:423842D3.BA0F13F2@sympatico.ca...
> >I just checked and Canadian Tire sells the input seal for $16.00 and the
> > other various seals if needed or a whole kit.
> >
> > I just unbolt the box and drop it down to change the front seal leaving
> > everything hooked up to it.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> I asked a while ago about seals for the power steering on my 81 CJ7,
> >> one
> >> of you gave a site with a seal kit, think it was $17.00, anyway time to
> >> quit
> >> topping it up every outing and fix it, it's the seal were the steering
> >> shaft
> >> goes in, anyway if someone knows were to get the seal kit I'd appreciate
> >> it.
I got a part number off the bozo I was talking to on the phone, he got
it wrong so I didn't bother asking him this time.
Too bad to, the local CT used to be a great one, now they only have one
brain dead fool on parts. I wonder if they know how much business he
has driven away?
Mike
Greg wrote:
>
> Thanks, was going to check them today but didn't think they would come
> though, guess you don't remember their part # for when I go and the 16 year
> old says a what for a what? They are not known for having intelligent parts
> people at the best of times, but all the staff have changed here in the last
> month so I have to train them all again :)
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:423842D3.BA0F13F2@sympatico.ca...
> >I just checked and Canadian Tire sells the input seal for $16.00 and the
> > other various seals if needed or a whole kit.
> >
> > I just unbolt the box and drop it down to change the front seal leaving
> > everything hooked up to it.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> I asked a while ago about seals for the power steering on my 81 CJ7,
> >> one
> >> of you gave a site with a seal kit, think it was $17.00, anyway time to
> >> quit
> >> topping it up every outing and fix it, it's the seal were the steering
> >> shaft
> >> goes in, anyway if someone knows were to get the seal kit I'd appreciate
> >> it.
Guest
Posts: n/a
Re: Hey Mike and or Bill
Got the same problem here. The good parts guy is gone and the last time
I got a part number off the bozo I was talking to on the phone, he got
it wrong so I didn't bother asking him this time.
Too bad to, the local CT used to be a great one, now they only have one
brain dead fool on parts. I wonder if they know how much business he
has driven away?
Mike
Greg wrote:
>
> Thanks, was going to check them today but didn't think they would come
> though, guess you don't remember their part # for when I go and the 16 year
> old says a what for a what? They are not known for having intelligent parts
> people at the best of times, but all the staff have changed here in the last
> month so I have to train them all again :)
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:423842D3.BA0F13F2@sympatico.ca...
> >I just checked and Canadian Tire sells the input seal for $16.00 and the
> > other various seals if needed or a whole kit.
> >
> > I just unbolt the box and drop it down to change the front seal leaving
> > everything hooked up to it.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> I asked a while ago about seals for the power steering on my 81 CJ7,
> >> one
> >> of you gave a site with a seal kit, think it was $17.00, anyway time to
> >> quit
> >> topping it up every outing and fix it, it's the seal were the steering
> >> shaft
> >> goes in, anyway if someone knows were to get the seal kit I'd appreciate
> >> it.
I got a part number off the bozo I was talking to on the phone, he got
it wrong so I didn't bother asking him this time.
Too bad to, the local CT used to be a great one, now they only have one
brain dead fool on parts. I wonder if they know how much business he
has driven away?
Mike
Greg wrote:
>
> Thanks, was going to check them today but didn't think they would come
> though, guess you don't remember their part # for when I go and the 16 year
> old says a what for a what? They are not known for having intelligent parts
> people at the best of times, but all the staff have changed here in the last
> month so I have to train them all again :)
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:423842D3.BA0F13F2@sympatico.ca...
> >I just checked and Canadian Tire sells the input seal for $16.00 and the
> > other various seals if needed or a whole kit.
> >
> > I just unbolt the box and drop it down to change the front seal leaving
> > everything hooked up to it.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> I asked a while ago about seals for the power steering on my 81 CJ7,
> >> one
> >> of you gave a site with a seal kit, think it was $17.00, anyway time to
> >> quit
> >> topping it up every outing and fix it, it's the seal were the steering
> >> shaft
> >> goes in, anyway if someone knows were to get the seal kit I'd appreciate
> >> it.
Guest
Posts: n/a
Re: Hey Mike and or Bill
Got the same problem here. The good parts guy is gone and the last time
I got a part number off the bozo I was talking to on the phone, he got
it wrong so I didn't bother asking him this time.
Too bad to, the local CT used to be a great one, now they only have one
brain dead fool on parts. I wonder if they know how much business he
has driven away?
Mike
Greg wrote:
>
> Thanks, was going to check them today but didn't think they would come
> though, guess you don't remember their part # for when I go and the 16 year
> old says a what for a what? They are not known for having intelligent parts
> people at the best of times, but all the staff have changed here in the last
> month so I have to train them all again :)
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:423842D3.BA0F13F2@sympatico.ca...
> >I just checked and Canadian Tire sells the input seal for $16.00 and the
> > other various seals if needed or a whole kit.
> >
> > I just unbolt the box and drop it down to change the front seal leaving
> > everything hooked up to it.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> I asked a while ago about seals for the power steering on my 81 CJ7,
> >> one
> >> of you gave a site with a seal kit, think it was $17.00, anyway time to
> >> quit
> >> topping it up every outing and fix it, it's the seal were the steering
> >> shaft
> >> goes in, anyway if someone knows were to get the seal kit I'd appreciate
> >> it.
I got a part number off the bozo I was talking to on the phone, he got
it wrong so I didn't bother asking him this time.
Too bad to, the local CT used to be a great one, now they only have one
brain dead fool on parts. I wonder if they know how much business he
has driven away?
Mike
Greg wrote:
>
> Thanks, was going to check them today but didn't think they would come
> though, guess you don't remember their part # for when I go and the 16 year
> old says a what for a what? They are not known for having intelligent parts
> people at the best of times, but all the staff have changed here in the last
> month so I have to train them all again :)
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:423842D3.BA0F13F2@sympatico.ca...
> >I just checked and Canadian Tire sells the input seal for $16.00 and the
> > other various seals if needed or a whole kit.
> >
> > I just unbolt the box and drop it down to change the front seal leaving
> > everything hooked up to it.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> I asked a while ago about seals for the power steering on my 81 CJ7,
> >> one
> >> of you gave a site with a seal kit, think it was $17.00, anyway time to
> >> quit
> >> topping it up every outing and fix it, it's the seal were the steering
> >> shaft
> >> goes in, anyway if someone knows were to get the seal kit I'd appreciate
> >> it.
Guest
Posts: n/a
Re: Hey Mike and or Bill
I got a complete Rebuild Kit at NAPA for about $40. I think the seal is less
than $10 if you just want to do one.
"Greg" <greglc84@hotmail.com> wrote in message
news:z7OZd.691560$8l.381952@pd7tw1no...
> And were to get the seals?
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
> > Bill, The leak is where the steering column goes into the steering box.
> > The
> > pitman arm should not need to be disturbed.
> >
> > Mike Romain says the seals can be put in while the box is still mounted,
> > all
> > you have to do is pull the steering column and the seals will come off
> > over
> > the small shaft that the steering column is attached to.
> >
> >
> >
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:4237949F.9DF30719@***.net...
> >> Sorry, I was thinking pump, you still need the pitman arm puller,
> >> try to find a shop with American tools, as it must be forged.
> >>
> >> "L.W.(ßill) ------ III" wrote:
> >> >
> >> > Hi Greg,
> >> > Any of your local parts stores, that have a machine shop will
have
> >> > it. A Google search:
> >> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
> >> > rent/buy a puller for the pulley, and just replace that seal in
place,
> >> > works for me.
> >> > God Bless America, ßill O|||||||O
> >> > mailto:-------------------- http://www.----------.com/
> >
> >
>
>
than $10 if you just want to do one.
"Greg" <greglc84@hotmail.com> wrote in message
news:z7OZd.691560$8l.381952@pd7tw1no...
> And were to get the seals?
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
> > Bill, The leak is where the steering column goes into the steering box.
> > The
> > pitman arm should not need to be disturbed.
> >
> > Mike Romain says the seals can be put in while the box is still mounted,
> > all
> > you have to do is pull the steering column and the seals will come off
> > over
> > the small shaft that the steering column is attached to.
> >
> >
> >
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:4237949F.9DF30719@***.net...
> >> Sorry, I was thinking pump, you still need the pitman arm puller,
> >> try to find a shop with American tools, as it must be forged.
> >>
> >> "L.W.(ßill) ------ III" wrote:
> >> >
> >> > Hi Greg,
> >> > Any of your local parts stores, that have a machine shop will
have
> >> > it. A Google search:
> >> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
> >> > rent/buy a puller for the pulley, and just replace that seal in
place,
> >> > works for me.
> >> > God Bless America, ßill O|||||||O
> >> > mailto:-------------------- http://www.----------.com/
> >
> >
>
>
Guest
Posts: n/a
Re: Hey Mike and or Bill
I got a complete Rebuild Kit at NAPA for about $40. I think the seal is less
than $10 if you just want to do one.
"Greg" <greglc84@hotmail.com> wrote in message
news:z7OZd.691560$8l.381952@pd7tw1no...
> And were to get the seals?
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
> > Bill, The leak is where the steering column goes into the steering box.
> > The
> > pitman arm should not need to be disturbed.
> >
> > Mike Romain says the seals can be put in while the box is still mounted,
> > all
> > you have to do is pull the steering column and the seals will come off
> > over
> > the small shaft that the steering column is attached to.
> >
> >
> >
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:4237949F.9DF30719@***.net...
> >> Sorry, I was thinking pump, you still need the pitman arm puller,
> >> try to find a shop with American tools, as it must be forged.
> >>
> >> "L.W.(ßill) ------ III" wrote:
> >> >
> >> > Hi Greg,
> >> > Any of your local parts stores, that have a machine shop will
have
> >> > it. A Google search:
> >> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
> >> > rent/buy a puller for the pulley, and just replace that seal in
place,
> >> > works for me.
> >> > God Bless America, ßill O|||||||O
> >> > mailto:-------------------- http://www.----------.com/
> >
> >
>
>
than $10 if you just want to do one.
"Greg" <greglc84@hotmail.com> wrote in message
news:z7OZd.691560$8l.381952@pd7tw1no...
> And were to get the seals?
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
> > Bill, The leak is where the steering column goes into the steering box.
> > The
> > pitman arm should not need to be disturbed.
> >
> > Mike Romain says the seals can be put in while the box is still mounted,
> > all
> > you have to do is pull the steering column and the seals will come off
> > over
> > the small shaft that the steering column is attached to.
> >
> >
> >
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:4237949F.9DF30719@***.net...
> >> Sorry, I was thinking pump, you still need the pitman arm puller,
> >> try to find a shop with American tools, as it must be forged.
> >>
> >> "L.W.(ßill) ------ III" wrote:
> >> >
> >> > Hi Greg,
> >> > Any of your local parts stores, that have a machine shop will
have
> >> > it. A Google search:
> >> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
> >> > rent/buy a puller for the pulley, and just replace that seal in
place,
> >> > works for me.
> >> > God Bless America, ßill O|||||||O
> >> > mailto:-------------------- http://www.----------.com/
> >
> >
>
>
Guest
Posts: n/a
Re: Hey Mike and or Bill
I got a complete Rebuild Kit at NAPA for about $40. I think the seal is less
than $10 if you just want to do one.
"Greg" <greglc84@hotmail.com> wrote in message
news:z7OZd.691560$8l.381952@pd7tw1no...
> And were to get the seals?
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
> > Bill, The leak is where the steering column goes into the steering box.
> > The
> > pitman arm should not need to be disturbed.
> >
> > Mike Romain says the seals can be put in while the box is still mounted,
> > all
> > you have to do is pull the steering column and the seals will come off
> > over
> > the small shaft that the steering column is attached to.
> >
> >
> >
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:4237949F.9DF30719@***.net...
> >> Sorry, I was thinking pump, you still need the pitman arm puller,
> >> try to find a shop with American tools, as it must be forged.
> >>
> >> "L.W.(ßill) ------ III" wrote:
> >> >
> >> > Hi Greg,
> >> > Any of your local parts stores, that have a machine shop will
have
> >> > it. A Google search:
> >> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
> >> > rent/buy a puller for the pulley, and just replace that seal in
place,
> >> > works for me.
> >> > God Bless America, ßill O|||||||O
> >> > mailto:-------------------- http://www.----------.com/
> >
> >
>
>
than $10 if you just want to do one.
"Greg" <greglc84@hotmail.com> wrote in message
news:z7OZd.691560$8l.381952@pd7tw1no...
> And were to get the seals?
>
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
> news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
> > Bill, The leak is where the steering column goes into the steering box.
> > The
> > pitman arm should not need to be disturbed.
> >
> > Mike Romain says the seals can be put in while the box is still mounted,
> > all
> > you have to do is pull the steering column and the seals will come off
> > over
> > the small shaft that the steering column is attached to.
> >
> >
> >
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:4237949F.9DF30719@***.net...
> >> Sorry, I was thinking pump, you still need the pitman arm puller,
> >> try to find a shop with American tools, as it must be forged.
> >>
> >> "L.W.(ßill) ------ III" wrote:
> >> >
> >> > Hi Greg,
> >> > Any of your local parts stores, that have a machine shop will
have
> >> > it. A Google search:
> >> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
> >> > rent/buy a puller for the pulley, and just replace that seal in
place,
> >> > works for me.
> >> > God Bless America, ßill O|||||||O
> >> > mailto:-------------------- http://www.----------.com/
> >
> >
>
>
Guest
Posts: n/a
Re: Hey Mike and or Bill
May try them today, Can Tire didn't have one in stock, looked on computer
and said there is only one in warehouse in Calgary, I said order it, but
saying there is only one is only one away from sorry, we are out.
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:W9GdnQz1dcRX4qXfRVn-sg@ez2.net...
>I got a complete Rebuild Kit at NAPA for about $40. I think the seal is
>less
> than $10 if you just want to do one.
>
>
>
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:z7OZd.691560$8l.381952@pd7tw1no...
>> And were to get the seals?
>>
>> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
>> news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
>> > Bill, The leak is where the steering column goes into the steering box.
>> > The
>> > pitman arm should not need to be disturbed.
>> >
>> > Mike Romain says the seals can be put in while the box is still
>> > mounted,
>> > all
>> > you have to do is pull the steering column and the seals will come off
>> > over
>> > the small shaft that the steering column is attached to.
>> >
>> >
>> >
>> >
>> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
>> > news:4237949F.9DF30719@***.net...
>> >> Sorry, I was thinking pump, you still need the pitman arm puller,
>> >> try to find a shop with American tools, as it must be forged.
>> >>
>> >> "L.W.(ßill) ------ III" wrote:
>> >> >
>> >> > Hi Greg,
>> >> > Any of your local parts stores, that have a machine shop will
> have
>> >> > it. A Google search:
>> >> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
>> >> > rent/buy a puller for the pulley, and just replace that seal in
> place,
>> >> > works for me.
>> >> > God Bless America, ßill O|||||||O
>> >> > mailto:-------------------- http://www.----------.com/
>> >
>> >
>>
>>
>
>
and said there is only one in warehouse in Calgary, I said order it, but
saying there is only one is only one away from sorry, we are out.
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:W9GdnQz1dcRX4qXfRVn-sg@ez2.net...
>I got a complete Rebuild Kit at NAPA for about $40. I think the seal is
>less
> than $10 if you just want to do one.
>
>
>
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:z7OZd.691560$8l.381952@pd7tw1no...
>> And were to get the seals?
>>
>> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
>> news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
>> > Bill, The leak is where the steering column goes into the steering box.
>> > The
>> > pitman arm should not need to be disturbed.
>> >
>> > Mike Romain says the seals can be put in while the box is still
>> > mounted,
>> > all
>> > you have to do is pull the steering column and the seals will come off
>> > over
>> > the small shaft that the steering column is attached to.
>> >
>> >
>> >
>> >
>> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
>> > news:4237949F.9DF30719@***.net...
>> >> Sorry, I was thinking pump, you still need the pitman arm puller,
>> >> try to find a shop with American tools, as it must be forged.
>> >>
>> >> "L.W.(ßill) ------ III" wrote:
>> >> >
>> >> > Hi Greg,
>> >> > Any of your local parts stores, that have a machine shop will
> have
>> >> > it. A Google search:
>> >> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
>> >> > rent/buy a puller for the pulley, and just replace that seal in
> place,
>> >> > works for me.
>> >> > God Bless America, ßill O|||||||O
>> >> > mailto:-------------------- http://www.----------.com/
>> >
>> >
>>
>>
>
>
Guest
Posts: n/a
Re: Hey Mike and or Bill
May try them today, Can Tire didn't have one in stock, looked on computer
and said there is only one in warehouse in Calgary, I said order it, but
saying there is only one is only one away from sorry, we are out.
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:W9GdnQz1dcRX4qXfRVn-sg@ez2.net...
>I got a complete Rebuild Kit at NAPA for about $40. I think the seal is
>less
> than $10 if you just want to do one.
>
>
>
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:z7OZd.691560$8l.381952@pd7tw1no...
>> And were to get the seals?
>>
>> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
>> news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
>> > Bill, The leak is where the steering column goes into the steering box.
>> > The
>> > pitman arm should not need to be disturbed.
>> >
>> > Mike Romain says the seals can be put in while the box is still
>> > mounted,
>> > all
>> > you have to do is pull the steering column and the seals will come off
>> > over
>> > the small shaft that the steering column is attached to.
>> >
>> >
>> >
>> >
>> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
>> > news:4237949F.9DF30719@***.net...
>> >> Sorry, I was thinking pump, you still need the pitman arm puller,
>> >> try to find a shop with American tools, as it must be forged.
>> >>
>> >> "L.W.(ßill) ------ III" wrote:
>> >> >
>> >> > Hi Greg,
>> >> > Any of your local parts stores, that have a machine shop will
> have
>> >> > it. A Google search:
>> >> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
>> >> > rent/buy a puller for the pulley, and just replace that seal in
> place,
>> >> > works for me.
>> >> > God Bless America, ßill O|||||||O
>> >> > mailto:-------------------- http://www.----------.com/
>> >
>> >
>>
>>
>
>
and said there is only one in warehouse in Calgary, I said order it, but
saying there is only one is only one away from sorry, we are out.
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:W9GdnQz1dcRX4qXfRVn-sg@ez2.net...
>I got a complete Rebuild Kit at NAPA for about $40. I think the seal is
>less
> than $10 if you just want to do one.
>
>
>
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:z7OZd.691560$8l.381952@pd7tw1no...
>> And were to get the seals?
>>
>> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
>> news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
>> > Bill, The leak is where the steering column goes into the steering box.
>> > The
>> > pitman arm should not need to be disturbed.
>> >
>> > Mike Romain says the seals can be put in while the box is still
>> > mounted,
>> > all
>> > you have to do is pull the steering column and the seals will come off
>> > over
>> > the small shaft that the steering column is attached to.
>> >
>> >
>> >
>> >
>> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
>> > news:4237949F.9DF30719@***.net...
>> >> Sorry, I was thinking pump, you still need the pitman arm puller,
>> >> try to find a shop with American tools, as it must be forged.
>> >>
>> >> "L.W.(ßill) ------ III" wrote:
>> >> >
>> >> > Hi Greg,
>> >> > Any of your local parts stores, that have a machine shop will
> have
>> >> > it. A Google search:
>> >> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
>> >> > rent/buy a puller for the pulley, and just replace that seal in
> place,
>> >> > works for me.
>> >> > God Bless America, ßill O|||||||O
>> >> > mailto:-------------------- http://www.----------.com/
>> >
>> >
>>
>>
>
>
Guest
Posts: n/a
Re: Hey Mike and or Bill
May try them today, Can Tire didn't have one in stock, looked on computer
and said there is only one in warehouse in Calgary, I said order it, but
saying there is only one is only one away from sorry, we are out.
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:W9GdnQz1dcRX4qXfRVn-sg@ez2.net...
>I got a complete Rebuild Kit at NAPA for about $40. I think the seal is
>less
> than $10 if you just want to do one.
>
>
>
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:z7OZd.691560$8l.381952@pd7tw1no...
>> And were to get the seals?
>>
>> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
>> news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
>> > Bill, The leak is where the steering column goes into the steering box.
>> > The
>> > pitman arm should not need to be disturbed.
>> >
>> > Mike Romain says the seals can be put in while the box is still
>> > mounted,
>> > all
>> > you have to do is pull the steering column and the seals will come off
>> > over
>> > the small shaft that the steering column is attached to.
>> >
>> >
>> >
>> >
>> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
>> > news:4237949F.9DF30719@***.net...
>> >> Sorry, I was thinking pump, you still need the pitman arm puller,
>> >> try to find a shop with American tools, as it must be forged.
>> >>
>> >> "L.W.(ßill) ------ III" wrote:
>> >> >
>> >> > Hi Greg,
>> >> > Any of your local parts stores, that have a machine shop will
> have
>> >> > it. A Google search:
>> >> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
>> >> > rent/buy a puller for the pulley, and just replace that seal in
> place,
>> >> > works for me.
>> >> > God Bless America, ßill O|||||||O
>> >> > mailto:-------------------- http://www.----------.com/
>> >
>> >
>>
>>
>
>
and said there is only one in warehouse in Calgary, I said order it, but
saying there is only one is only one away from sorry, we are out.
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:W9GdnQz1dcRX4qXfRVn-sg@ez2.net...
>I got a complete Rebuild Kit at NAPA for about $40. I think the seal is
>less
> than $10 if you just want to do one.
>
>
>
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:z7OZd.691560$8l.381952@pd7tw1no...
>> And were to get the seals?
>>
>> "Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
>> news:ZoCdnaXcG_RMPqrfRVn-1g@ez2.net...
>> > Bill, The leak is where the steering column goes into the steering box.
>> > The
>> > pitman arm should not need to be disturbed.
>> >
>> > Mike Romain says the seals can be put in while the box is still
>> > mounted,
>> > all
>> > you have to do is pull the steering column and the seals will come off
>> > over
>> > the small shaft that the steering column is attached to.
>> >
>> >
>> >
>> >
>> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
>> > news:4237949F.9DF30719@***.net...
>> >> Sorry, I was thinking pump, you still need the pitman arm puller,
>> >> try to find a shop with American tools, as it must be forged.
>> >>
>> >> "L.W.(ßill) ------ III" wrote:
>> >> >
>> >> > Hi Greg,
>> >> > Any of your local parts stores, that have a machine shop will
> have
>> >> > it. A Google search:
>> >> > http://www.rubicon4x4.com/catalog/in...cPath/459_2103 Be sure a
>> >> > rent/buy a puller for the pulley, and just replace that seal in
> place,
>> >> > works for me.
>> >> > God Bless America, ßill O|||||||O
>> >> > mailto:-------------------- http://www.----------.com/
>> >
>> >
>>
>>
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)