help w/ resetting a/c
01-03-2005, 12:48 PM
#1
Guest
Posts: n/a
help w/ resetting a/c
on my 02 ltd, the heater only comes on when you turn the temp dial to
HI. doesn't matter what is temp inside or outside. if you turn dail
from HI to 85, it blows cold air. this has been the case since i bought
the jeep. i remember reading once the hvac was user programmable. i was
wondering if anyone knows how to reset the programming.
thanks
shane
HI. doesn't matter what is temp inside or outside. if you turn dail
from HI to 85, it blows cold air. this has been the case since i bought
the jeep. i remember reading once the hvac was user programmable. i was
wondering if anyone knows how to reset the programming.
thanks
shane
01-03-2005, 01:09 PM
#2
Guest
Posts: n/a
Re: help w/ resetting a/c
do you mean HI fan speed? or HI on the temperature setting?!
If it's HI on the fan speed then I think someone mentioned a similar issue
with the relay or was it a resistor pack...
<shanekennedy00@netscape.net> wrote in message
news:1104774539.230262.178670@z14g2000cwz.googlegr oups.com...
> on my 02 ltd, the heater only comes on when you turn the temp dial to
> HI. doesn't matter what is temp inside or outside. if you turn dail
> from HI to 85, it blows cold air. this has been the case since i bought
> the jeep. i remember reading once the hvac was user programmable. i was
> wondering if anyone knows how to reset the programming.
>
> thanks
> shane
>
If it's HI on the fan speed then I think someone mentioned a similar issue
with the relay or was it a resistor pack...
<shanekennedy00@netscape.net> wrote in message
news:1104774539.230262.178670@z14g2000cwz.googlegr oups.com...
> on my 02 ltd, the heater only comes on when you turn the temp dial to
> HI. doesn't matter what is temp inside or outside. if you turn dail
> from HI to 85, it blows cold air. this has been the case since i bought
> the jeep. i remember reading once the hvac was user programmable. i was
> wondering if anyone knows how to reset the programming.
>
> thanks
> shane
>
01-03-2005, 01:09 PM
#3
Guest
Posts: n/a
Re: help w/ resetting a/c
do you mean HI fan speed? or HI on the temperature setting?!
If it's HI on the fan speed then I think someone mentioned a similar issue
with the relay or was it a resistor pack...
<shanekennedy00@netscape.net> wrote in message
news:1104774539.230262.178670@z14g2000cwz.googlegr oups.com...
> on my 02 ltd, the heater only comes on when you turn the temp dial to
> HI. doesn't matter what is temp inside or outside. if you turn dail
> from HI to 85, it blows cold air. this has been the case since i bought
> the jeep. i remember reading once the hvac was user programmable. i was
> wondering if anyone knows how to reset the programming.
>
> thanks
> shane
>
If it's HI on the fan speed then I think someone mentioned a similar issue
with the relay or was it a resistor pack...
<shanekennedy00@netscape.net> wrote in message
news:1104774539.230262.178670@z14g2000cwz.googlegr oups.com...
> on my 02 ltd, the heater only comes on when you turn the temp dial to
> HI. doesn't matter what is temp inside or outside. if you turn dail
> from HI to 85, it blows cold air. this has been the case since i bought
> the jeep. i remember reading once the hvac was user programmable. i was
> wondering if anyone knows how to reset the programming.
>
> thanks
> shane
>
01-03-2005, 01:09 PM
#4
Guest
Posts: n/a
Re: help w/ resetting a/c
do you mean HI fan speed? or HI on the temperature setting?!
If it's HI on the fan speed then I think someone mentioned a similar issue
with the relay or was it a resistor pack...
<shanekennedy00@netscape.net> wrote in message
news:1104774539.230262.178670@z14g2000cwz.googlegr oups.com...
> on my 02 ltd, the heater only comes on when you turn the temp dial to
> HI. doesn't matter what is temp inside or outside. if you turn dail
> from HI to 85, it blows cold air. this has been the case since i bought
> the jeep. i remember reading once the hvac was user programmable. i was
> wondering if anyone knows how to reset the programming.
>
> thanks
> shane
>
If it's HI on the fan speed then I think someone mentioned a similar issue
with the relay or was it a resistor pack...
<shanekennedy00@netscape.net> wrote in message
news:1104774539.230262.178670@z14g2000cwz.googlegr oups.com...
> on my 02 ltd, the heater only comes on when you turn the temp dial to
> HI. doesn't matter what is temp inside or outside. if you turn dail
> from HI to 85, it blows cold air. this has been the case since i bought
> the jeep. i remember reading once the hvac was user programmable. i was
> wondering if anyone knows how to reset the programming.
>
> thanks
> shane
>
01-03-2005, 01:33 PM
#5
Guest
Posts: n/a
Re: help w/ resetting a/c
SteveBrady did pass the time by typing:
> do you mean HI fan speed? or HI on the temperature setting?!
> If it's HI on the fan speed then I think someone mentioned a similar issue
> with the relay or was it a resistor pack...
Dead relay = no high fan speed on the automatic system
(doesn't exist on manual systems)
Dead resistor pack = only high fan speed on automatic systems
nothing or just high speed on manual systems
Temp dial adjusts the blend door (stepper motor) for automatic systems.
> shanekennedy00 wrote ...
>> on my 02 ltd, the heater only comes on when you turn the temp dial to
>> HI. doesn't matter what is temp inside or outside. if you turn dail
>> from HI to 85, it blows cold air. this has been the case since i bought
>> the jeep. i remember reading once the hvac was user programmable. i was
>> wondering if anyone knows how to reset the programming.
I'd be taking it back if there is any warranty left.
The system is not user programmable unless you have a DRBIII scantool.
There are diagnostics built in but this is for the 93-95 ZJ. May still
work. YMMV
Turn the key to (on)
- Depress both A/C and RECIRC buttons (and hold them down)
- Turn the temp **** one click clockwise
All segments should light up.
- Release the A/C and RECIRC buttons
You are now at the "select test" level and the display should
show 00
- Push either A/C or Recirc (just one) and release
You should see the little stickman and numbers cycling.
(record the numbers)
- Turn off the key to exit.
Then post back here. There are too many tests to type them all up.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> do you mean HI fan speed? or HI on the temperature setting?!
> If it's HI on the fan speed then I think someone mentioned a similar issue
> with the relay or was it a resistor pack...
Dead relay = no high fan speed on the automatic system
(doesn't exist on manual systems)
Dead resistor pack = only high fan speed on automatic systems
nothing or just high speed on manual systems
Temp dial adjusts the blend door (stepper motor) for automatic systems.
> shanekennedy00 wrote ...
>> on my 02 ltd, the heater only comes on when you turn the temp dial to
>> HI. doesn't matter what is temp inside or outside. if you turn dail
>> from HI to 85, it blows cold air. this has been the case since i bought
>> the jeep. i remember reading once the hvac was user programmable. i was
>> wondering if anyone knows how to reset the programming.
I'd be taking it back if there is any warranty left.
The system is not user programmable unless you have a DRBIII scantool.
There are diagnostics built in but this is for the 93-95 ZJ. May still
work. YMMV
Turn the key to (on)
- Depress both A/C and RECIRC buttons (and hold them down)
- Turn the temp **** one click clockwise
All segments should light up.
- Release the A/C and RECIRC buttons
You are now at the "select test" level and the display should
show 00
- Push either A/C or Recirc (just one) and release
You should see the little stickman and numbers cycling.
(record the numbers)
- Turn off the key to exit.
Then post back here. There are too many tests to type them all up.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
01-03-2005, 01:33 PM
#6
Guest
Posts: n/a
Re: help w/ resetting a/c
SteveBrady did pass the time by typing:
> do you mean HI fan speed? or HI on the temperature setting?!
> If it's HI on the fan speed then I think someone mentioned a similar issue
> with the relay or was it a resistor pack...
Dead relay = no high fan speed on the automatic system
(doesn't exist on manual systems)
Dead resistor pack = only high fan speed on automatic systems
nothing or just high speed on manual systems
Temp dial adjusts the blend door (stepper motor) for automatic systems.
> shanekennedy00 wrote ...
>> on my 02 ltd, the heater only comes on when you turn the temp dial to
>> HI. doesn't matter what is temp inside or outside. if you turn dail
>> from HI to 85, it blows cold air. this has been the case since i bought
>> the jeep. i remember reading once the hvac was user programmable. i was
>> wondering if anyone knows how to reset the programming.
I'd be taking it back if there is any warranty left.
The system is not user programmable unless you have a DRBIII scantool.
There are diagnostics built in but this is for the 93-95 ZJ. May still
work. YMMV
Turn the key to (on)
- Depress both A/C and RECIRC buttons (and hold them down)
- Turn the temp **** one click clockwise
All segments should light up.
- Release the A/C and RECIRC buttons
You are now at the "select test" level and the display should
show 00
- Push either A/C or Recirc (just one) and release
You should see the little stickman and numbers cycling.
(record the numbers)
- Turn off the key to exit.
Then post back here. There are too many tests to type them all up.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> do you mean HI fan speed? or HI on the temperature setting?!
> If it's HI on the fan speed then I think someone mentioned a similar issue
> with the relay or was it a resistor pack...
Dead relay = no high fan speed on the automatic system
(doesn't exist on manual systems)
Dead resistor pack = only high fan speed on automatic systems
nothing or just high speed on manual systems
Temp dial adjusts the blend door (stepper motor) for automatic systems.
> shanekennedy00 wrote ...
>> on my 02 ltd, the heater only comes on when you turn the temp dial to
>> HI. doesn't matter what is temp inside or outside. if you turn dail
>> from HI to 85, it blows cold air. this has been the case since i bought
>> the jeep. i remember reading once the hvac was user programmable. i was
>> wondering if anyone knows how to reset the programming.
I'd be taking it back if there is any warranty left.
The system is not user programmable unless you have a DRBIII scantool.
There are diagnostics built in but this is for the 93-95 ZJ. May still
work. YMMV
Turn the key to (on)
- Depress both A/C and RECIRC buttons (and hold them down)
- Turn the temp **** one click clockwise
All segments should light up.
- Release the A/C and RECIRC buttons
You are now at the "select test" level and the display should
show 00
- Push either A/C or Recirc (just one) and release
You should see the little stickman and numbers cycling.
(record the numbers)
- Turn off the key to exit.
Then post back here. There are too many tests to type them all up.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
01-03-2005, 01:33 PM
#7
Guest
Posts: n/a
Re: help w/ resetting a/c
SteveBrady did pass the time by typing:
> do you mean HI fan speed? or HI on the temperature setting?!
> If it's HI on the fan speed then I think someone mentioned a similar issue
> with the relay or was it a resistor pack...
Dead relay = no high fan speed on the automatic system
(doesn't exist on manual systems)
Dead resistor pack = only high fan speed on automatic systems
nothing or just high speed on manual systems
Temp dial adjusts the blend door (stepper motor) for automatic systems.
> shanekennedy00 wrote ...
>> on my 02 ltd, the heater only comes on when you turn the temp dial to
>> HI. doesn't matter what is temp inside or outside. if you turn dail
>> from HI to 85, it blows cold air. this has been the case since i bought
>> the jeep. i remember reading once the hvac was user programmable. i was
>> wondering if anyone knows how to reset the programming.
I'd be taking it back if there is any warranty left.
The system is not user programmable unless you have a DRBIII scantool.
There are diagnostics built in but this is for the 93-95 ZJ. May still
work. YMMV
Turn the key to (on)
- Depress both A/C and RECIRC buttons (and hold them down)
- Turn the temp **** one click clockwise
All segments should light up.
- Release the A/C and RECIRC buttons
You are now at the "select test" level and the display should
show 00
- Push either A/C or Recirc (just one) and release
You should see the little stickman and numbers cycling.
(record the numbers)
- Turn off the key to exit.
Then post back here. There are too many tests to type them all up.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> do you mean HI fan speed? or HI on the temperature setting?!
> If it's HI on the fan speed then I think someone mentioned a similar issue
> with the relay or was it a resistor pack...
Dead relay = no high fan speed on the automatic system
(doesn't exist on manual systems)
Dead resistor pack = only high fan speed on automatic systems
nothing or just high speed on manual systems
Temp dial adjusts the blend door (stepper motor) for automatic systems.
> shanekennedy00 wrote ...
>> on my 02 ltd, the heater only comes on when you turn the temp dial to
>> HI. doesn't matter what is temp inside or outside. if you turn dail
>> from HI to 85, it blows cold air. this has been the case since i bought
>> the jeep. i remember reading once the hvac was user programmable. i was
>> wondering if anyone knows how to reset the programming.
I'd be taking it back if there is any warranty left.
The system is not user programmable unless you have a DRBIII scantool.
There are diagnostics built in but this is for the 93-95 ZJ. May still
work. YMMV
Turn the key to (on)
- Depress both A/C and RECIRC buttons (and hold them down)
- Turn the temp **** one click clockwise
All segments should light up.
- Release the A/C and RECIRC buttons
You are now at the "select test" level and the display should
show 00
- Push either A/C or Recirc (just one) and release
You should see the little stickman and numbers cycling.
(record the numbers)
- Turn off the key to exit.
Then post back here. There are too many tests to type them all up.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
01-03-2005, 03:37 PM
#8
Guest
Posts: n/a
Re: help w/ resetting a/c
http://www.----------.com/resistor.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/resistor.htm
shanekennedy00@netscape.net wrote:
>
> on my 02 ltd, the heater only comes on when you turn the temp dial to
> HI. doesn't matter what is temp inside or outside. if you turn dail
> from HI to 85, it blows cold air. this has been the case since i bought
> the jeep. i remember reading once the hvac was user programmable. i was
> wondering if anyone knows how to reset the programming.
>
> thanks
> shane
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/resistor.htm
shanekennedy00@netscape.net wrote:
>
> on my 02 ltd, the heater only comes on when you turn the temp dial to
> HI. doesn't matter what is temp inside or outside. if you turn dail
> from HI to 85, it blows cold air. this has been the case since i bought
> the jeep. i remember reading once the hvac was user programmable. i was
> wondering if anyone knows how to reset the programming.
>
> thanks
> shane
01-03-2005, 03:37 PM
#9
Guest
Posts: n/a
Re: help w/ resetting a/c
http://www.----------.com/resistor.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/resistor.htm
shanekennedy00@netscape.net wrote:
>
> on my 02 ltd, the heater only comes on when you turn the temp dial to
> HI. doesn't matter what is temp inside or outside. if you turn dail
> from HI to 85, it blows cold air. this has been the case since i bought
> the jeep. i remember reading once the hvac was user programmable. i was
> wondering if anyone knows how to reset the programming.
>
> thanks
> shane
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/resistor.htm
shanekennedy00@netscape.net wrote:
>
> on my 02 ltd, the heater only comes on when you turn the temp dial to
> HI. doesn't matter what is temp inside or outside. if you turn dail
> from HI to 85, it blows cold air. this has been the case since i bought
> the jeep. i remember reading once the hvac was user programmable. i was
> wondering if anyone knows how to reset the programming.
>
> thanks
> shane
01-03-2005, 03:37 PM
#10
Guest
Posts: n/a
Re: help w/ resetting a/c
http://www.----------.com/resistor.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/resistor.htm
shanekennedy00@netscape.net wrote:
>
> on my 02 ltd, the heater only comes on when you turn the temp dial to
> HI. doesn't matter what is temp inside or outside. if you turn dail
> from HI to 85, it blows cold air. this has been the case since i bought
> the jeep. i remember reading once the hvac was user programmable. i was
> wondering if anyone knows how to reset the programming.
>
> thanks
> shane
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/resistor.htm
shanekennedy00@netscape.net wrote:
>
> on my 02 ltd, the heater only comes on when you turn the temp dial to
> HI. doesn't matter what is temp inside or outside. if you turn dail
> from HI to 85, it blows cold air. this has been the case since i bought
> the jeep. i remember reading once the hvac was user programmable. i was
> wondering if anyone knows how to reset the programming.
>
> thanks
> shane
