JohnE.P.--JEP

Thanks Bill
but its not coming from the vent drain. i have my vent covered over on
the outside, and have checked the drain,
question 1-- was i supposed tp use adhesive on the top part of the
winshield/cowl gasket?
question 2--if so what type of adhesive??

thanks
john p new Jeepers-creepers owner,,,


L.W.(ßill) ------ III <----------@***.net> wrote in message news:<41A55AB4.4AA44CDF@***.net>...
> Cowl vent drain:
> http://www.Google.com/groups?hl=en&l...eep%252Bwillys
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> somebody wrote:
> >
> > OK i need help, its raining like crazy and going to for the next five
> > monthes,
> > my cowl/winshild gasket was toast so i went and bought a new one at olymic
> > 4X4
> > (90YJ) i unhooked all my crap on the winshield,,bars,,and inside plates,
> > softtop bars, rolled the top back, dropped the winshield unscrewed the old
> > one,
> > cleaned it all out dryed it all,
> > then replaced it with the new one, making shure ithe lips were into the
> > gasket
> > and it was seated correctly,
> > tilted the windshield back up and re-assembled it all,
> > so now its been sitting outside in the pouring rain and ya you guessed it,
> > my floor-boards are soaked,,and carpet, im dripping water from under the
> > dash
> > and
> > from the corners by the plates above the speakers,
> > ,
> > i need help,,or my dash is gonna rot, or give up the electrical ghost,
> > ,
> > was i supposed to calk behind the outside lip?
> > was i supposed to calk anywhere on the gasket,,top,,bottom??
> > ,
> > help, please,
> > John Pike,
> > email me at scope_addict "at" verizon "dot" net
> > or here,
> > anything quick would be most apriciated,, thanks again

JohnE.P.--JEP

Thanks Bill
but its not coming from the vent drain. i have my vent covered over on
the outside, and have checked the drain,
question 1-- was i supposed tp use adhesive on the top part of the
winshield/cowl gasket?
question 2--if so what type of adhesive??

thanks
john p new Jeepers-creepers owner,,,


L.W.(ßill) ------ III <----------@***.net> wrote in message news:<41A55AB4.4AA44CDF@***.net>...
> Cowl vent drain:
> http://www.Google.com/groups?hl=en&l...eep%252Bwillys
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> somebody wrote:
> >
> > OK i need help, its raining like crazy and going to for the next five
> > monthes,
> > my cowl/winshild gasket was toast so i went and bought a new one at olymic
> > 4X4
> > (90YJ) i unhooked all my crap on the winshield,,bars,,and inside plates,
> > softtop bars, rolled the top back, dropped the winshield unscrewed the old
> > one,
> > cleaned it all out dryed it all,
> > then replaced it with the new one, making shure ithe lips were into the
> > gasket
> > and it was seated correctly,
> > tilted the windshield back up and re-assembled it all,
> > so now its been sitting outside in the pouring rain and ya you guessed it,
> > my floor-boards are soaked,,and carpet, im dripping water from under the
> > dash
> > and
> > from the corners by the plates above the speakers,
> > ,
> > i need help,,or my dash is gonna rot, or give up the electrical ghost,
> > ,
> > was i supposed to calk behind the outside lip?
> > was i supposed to calk anywhere on the gasket,,top,,bottom??
> > ,
> > help, please,
> > John Pike,
> > email me at scope_addict "at" verizon "dot" net
> > or here,
> > anything quick would be most apriciated,, thanks again

JohnE.P.--JEP

Thanks Bill
but its not coming from the vent drain. i have my vent covered over on
the outside, and have checked the drain,
question 1-- was i supposed tp use adhesive on the top part of the
winshield/cowl gasket?
question 2--if so what type of adhesive??

thanks
john p new Jeepers-creepers owner,,,


L.W.(ßill) ------ III <----------@***.net> wrote in message news:<41A55AB4.4AA44CDF@***.net>...
> Cowl vent drain:
> http://www.Google.com/groups?hl=en&l...eep%252Bwillys
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> somebody wrote:
> >
> > OK i need help, its raining like crazy and going to for the next five
> > monthes,
> > my cowl/winshild gasket was toast so i went and bought a new one at olymic
> > 4X4
> > (90YJ) i unhooked all my crap on the winshield,,bars,,and inside plates,
> > softtop bars, rolled the top back, dropped the winshield unscrewed the old
> > one,
> > cleaned it all out dryed it all,
> > then replaced it with the new one, making shure ithe lips were into the
> > gasket
> > and it was seated correctly,
> > tilted the windshield back up and re-assembled it all,
> > so now its been sitting outside in the pouring rain and ya you guessed it,
> > my floor-boards are soaked,,and carpet, im dripping water from under the
> > dash
> > and
> > from the corners by the plates above the speakers,
> > ,
> > i need help,,or my dash is gonna rot, or give up the electrical ghost,
> > ,
> > was i supposed to calk behind the outside lip?
> > was i supposed to calk anywhere on the gasket,,top,,bottom??
> > ,
> > help, please,
> > John Pike,
> > email me at scope_addict "at" verizon "dot" net
> > or here,
> > anything quick would be most apriciated,, thanks again

Dave Milne

Frogs drink through their skin :-)

Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ

"HarryS" <NoSpam.com> wrote in message
news:y8ydnbZu0bAoUzjcRVn-uQ@comcast.com...
I did this on my CJ when it came time
> to replace the gasket because aftermarket gaskets are not as good as the
> OEMs. It should be as leak proof as a frogs butt.

Dave Milne

Frogs drink through their skin :-)

Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ

"HarryS" <NoSpam.com> wrote in message
news:y8ydnbZu0bAoUzjcRVn-uQ@comcast.com...
I did this on my CJ when it came time
> to replace the gasket because aftermarket gaskets are not as good as the
> OEMs. It should be as leak proof as a frogs butt.

Dave Milne

Frogs drink through their skin :-)

Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ

"HarryS" <NoSpam.com> wrote in message
news:y8ydnbZu0bAoUzjcRVn-uQ@comcast.com...
I did this on my CJ when it came time
> to replace the gasket because aftermarket gaskets are not as good as the
> OEMs. It should be as leak proof as a frogs butt.

Peter Parker

In article <L7qpd.22925$up1.530@text.news.blueyonder.co.uk> ,
Dave Milne <jeep@_nospam_milne.info> wrote:
>Frogs drink through their skin :-)

Yep. If you no longer have frogs living in your area, it means they
died from pollution. They are the first to go.

>
>Dave Milne, Scotland
>'91 Grand Wagoneer, '99 TJ
>
>"HarryS" <NoSpam.com> wrote in message
>news:y8ydnbZu0bAoUzjcRVn-uQ@comcast.com...
> I did this on my CJ when it came time
>> to replace the gasket because aftermarket gaskets are not as good as the
>> OEMs. It should be as leak proof as a frogs butt.
>
>


--
Jeeps and dubs and everything's nice...

Peter Parker

In article <L7qpd.22925$up1.530@text.news.blueyonder.co.uk> ,
Dave Milne <jeep@_nospam_milne.info> wrote:
>Frogs drink through their skin :-)

Yep. If you no longer have frogs living in your area, it means they
died from pollution. They are the first to go.

>
>Dave Milne, Scotland
>'91 Grand Wagoneer, '99 TJ
>
>"HarryS" <NoSpam.com> wrote in message
>news:y8ydnbZu0bAoUzjcRVn-uQ@comcast.com...
> I did this on my CJ when it came time
>> to replace the gasket because aftermarket gaskets are not as good as the
>> OEMs. It should be as leak proof as a frogs butt.
>
>


--
Jeeps and dubs and everything's nice...

Peter Parker

In article <L7qpd.22925$up1.530@text.news.blueyonder.co.uk> ,
Dave Milne <jeep@_nospam_milne.info> wrote:
>Frogs drink through their skin :-)

Yep. If you no longer have frogs living in your area, it means they
died from pollution. They are the first to go.

>
>Dave Milne, Scotland
>'91 Grand Wagoneer, '99 TJ
>
>"HarryS" <NoSpam.com> wrote in message
>news:y8ydnbZu0bAoUzjcRVn-uQ@comcast.com...
> I did this on my CJ when it came time
>> to replace the gasket because aftermarket gaskets are not as good as the
>> OEMs. It should be as leak proof as a frogs butt.
>
>


--
Jeeps and dubs and everything's nice...