Help with Crank Position Sensor - 89 Jeep Cherokee LTD
#71
Guest
Posts: n/a
Re: Help with Crank Position Sensor - 89 Jeep Cherokee LTD
On Thu, 22 Sep 2005 18:22:54 UTC "NT" <noThanks@hotmail.com> wrote:
> Thanks for the tips guys:
>
> What are you cleaning with? Some sort of electrical contact cleaner? I
> can't see how I'd get inside the connector to do any sort of a proper
> cleaning job (other than a spray cleaner).
Actually, the simple act of plugging and unpluging the connector a few
tiems will usually work, but the cleaners aid by removing more of the
oxide that forms. You can get small brushes to scrub the contacts but
that's not really required unless the suckers are growing fuzz. BTW,
if you use WD40, blow it out and get the connector dry before sealing
things up. After sitting for a long time, the residue from it can
actuall cause more problems.
--
Will Honea
> Thanks for the tips guys:
>
> What are you cleaning with? Some sort of electrical contact cleaner? I
> can't see how I'd get inside the connector to do any sort of a proper
> cleaning job (other than a spray cleaner).
Actually, the simple act of plugging and unpluging the connector a few
tiems will usually work, but the cleaners aid by removing more of the
oxide that forms. You can get small brushes to scrub the contacts but
that's not really required unless the suckers are growing fuzz. BTW,
if you use WD40, blow it out and get the connector dry before sealing
things up. After sitting for a long time, the residue from it can
actuall cause more problems.
--
Will Honea
#72
Guest
Posts: n/a
Re: Help with Crank Position Sensor - 89 Jeep Cherokee LTD
On Thu, 22 Sep 2005 18:22:54 UTC "NT" <noThanks@hotmail.com> wrote:
> Thanks for the tips guys:
>
> What are you cleaning with? Some sort of electrical contact cleaner? I
> can't see how I'd get inside the connector to do any sort of a proper
> cleaning job (other than a spray cleaner).
Actually, the simple act of plugging and unpluging the connector a few
tiems will usually work, but the cleaners aid by removing more of the
oxide that forms. You can get small brushes to scrub the contacts but
that's not really required unless the suckers are growing fuzz. BTW,
if you use WD40, blow it out and get the connector dry before sealing
things up. After sitting for a long time, the residue from it can
actuall cause more problems.
--
Will Honea
> Thanks for the tips guys:
>
> What are you cleaning with? Some sort of electrical contact cleaner? I
> can't see how I'd get inside the connector to do any sort of a proper
> cleaning job (other than a spray cleaner).
Actually, the simple act of plugging and unpluging the connector a few
tiems will usually work, but the cleaners aid by removing more of the
oxide that forms. You can get small brushes to scrub the contacts but
that's not really required unless the suckers are growing fuzz. BTW,
if you use WD40, blow it out and get the connector dry before sealing
things up. After sitting for a long time, the residue from it can
actuall cause more problems.
--
Will Honea
#73
Guest
Posts: n/a
Re: Help with Crank Position Sensor - 89 Jeep Cherokee LTD
On Thu, 22 Sep 2005 18:22:54 UTC "NT" <noThanks@hotmail.com> wrote:
> Thanks for the tips guys:
>
> What are you cleaning with? Some sort of electrical contact cleaner? I
> can't see how I'd get inside the connector to do any sort of a proper
> cleaning job (other than a spray cleaner).
Actually, the simple act of plugging and unpluging the connector a few
tiems will usually work, but the cleaners aid by removing more of the
oxide that forms. You can get small brushes to scrub the contacts but
that's not really required unless the suckers are growing fuzz. BTW,
if you use WD40, blow it out and get the connector dry before sealing
things up. After sitting for a long time, the residue from it can
actuall cause more problems.
--
Will Honea
> Thanks for the tips guys:
>
> What are you cleaning with? Some sort of electrical contact cleaner? I
> can't see how I'd get inside the connector to do any sort of a proper
> cleaning job (other than a spray cleaner).
Actually, the simple act of plugging and unpluging the connector a few
tiems will usually work, but the cleaners aid by removing more of the
oxide that forms. You can get small brushes to scrub the contacts but
that's not really required unless the suckers are growing fuzz. BTW,
if you use WD40, blow it out and get the connector dry before sealing
things up. After sitting for a long time, the residue from it can
actuall cause more problems.
--
Will Honea
Thread
Thread Starter
Forum
Replies
Last Post
Erich
Jeep Mailing List
48
01-30-2006 07:12 AM
Cherokee Boy
Jeep Mailing List
63
02-08-2005 02:35 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)