Heat shield necessary?
05-30-2004, 11:00 AM
#51
Guest
Posts: n/a
Re: Heat shield necessary?
Mike Romain did pass the time by typing:
> Ok, that's for hot foot, no worries.
>
> The aftermarket parts are likely better quality so don't throw so much
> heat off. Just a guess.
That is my impression. The stock ZJ muffler was made of some thin metal
but the Gibson you could probably run over without creating a dent.
> if it was structurally or safety wise needed, they all would have the
> shield.
One would hope so. :)
--
DougW
> Ok, that's for hot foot, no worries.
>
> The aftermarket parts are likely better quality so don't throw so much
> heat off. Just a guess.
That is my impression. The stock ZJ muffler was made of some thin metal
but the Gibson you could probably run over without creating a dent.
> if it was structurally or safety wise needed, they all would have the
> shield.
One would hope so. :)
--
DougW
05-30-2004, 11:00 AM
#52
Guest
Posts: n/a
Re: Heat shield necessary?
Mike Romain did pass the time by typing:
> Ok, that's for hot foot, no worries.
>
> The aftermarket parts are likely better quality so don't throw so much
> heat off. Just a guess.
That is my impression. The stock ZJ muffler was made of some thin metal
but the Gibson you could probably run over without creating a dent.
> if it was structurally or safety wise needed, they all would have the
> shield.
One would hope so. :)
--
DougW
> Ok, that's for hot foot, no worries.
>
> The aftermarket parts are likely better quality so don't throw so much
> heat off. Just a guess.
That is my impression. The stock ZJ muffler was made of some thin metal
but the Gibson you could probably run over without creating a dent.
> if it was structurally or safety wise needed, they all would have the
> shield.
One would hope so. :)
--
DougW
05-30-2004, 11:00 AM
#53
Guest
Posts: n/a
Re: Heat shield necessary?
Mike Romain did pass the time by typing:
> Ok, that's for hot foot, no worries.
>
> The aftermarket parts are likely better quality so don't throw so much
> heat off. Just a guess.
That is my impression. The stock ZJ muffler was made of some thin metal
but the Gibson you could probably run over without creating a dent.
> if it was structurally or safety wise needed, they all would have the
> shield.
One would hope so. :)
--
DougW
> Ok, that's for hot foot, no worries.
>
> The aftermarket parts are likely better quality so don't throw so much
> heat off. Just a guess.
That is my impression. The stock ZJ muffler was made of some thin metal
but the Gibson you could probably run over without creating a dent.
> if it was structurally or safety wise needed, they all would have the
> shield.
One would hope so. :)
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)