Re: Having trouble keeping it going
If you haven't done it yet, you should perform what is known as the NUTTER
BYPASS. Do a search of this website, and you should find it. It HP to your jeep. Much better performance. If you can't find it, I can email it to you. Dwayne Smith wrote: >I have an 89 Jeep YJ 4.2L and I'm having a hard time keeping the engine >idling. I've rebuilt the carb and replaced a couple worn out vacuum lines. I >would replace and check the locations of all the vacuum lines however the >diagrams I have are not very helpful. I've checked the timing and made sure >the vacuum advance mechanism is working also. I can work the idle screw so >it will idle high and that helps, but then the engine RPM's are over 2K at >idle. > >Any help would be great!! > >Thanks, > >Dwayne -- Message posted via CarKB.com http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200506/1 |
Re: Having trouble keeping it going
http://www.4x4wire.com/jeep/tech/ele...jn-ignition99/
heres a link to it.....enjoy Robb S wrote: >If you haven't done it yet, you should perform what is known as the NUTTER >BYPASS. Do a search of this website, and you should find it. It HP to your >jeep. Much better performance. If you can't find it, I can email it to you. > >>I have an 89 Jeep YJ 4.2L and I'm having a hard time keeping the engine >>idling. I've rebuilt the carb and replaced a couple worn out vacuum lines. I >[quoted text clipped - 9 lines] >> >>Dwayne -- Message posted via CarKB.com http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200506/1 |
Re: Having trouble keeping it going
http://www.4x4wire.com/jeep/tech/ele...jn-ignition99/
heres a link to it.....enjoy Robb S wrote: >If you haven't done it yet, you should perform what is known as the NUTTER >BYPASS. Do a search of this website, and you should find it. It HP to your >jeep. Much better performance. If you can't find it, I can email it to you. > >>I have an 89 Jeep YJ 4.2L and I'm having a hard time keeping the engine >>idling. I've rebuilt the carb and replaced a couple worn out vacuum lines. I >[quoted text clipped - 9 lines] >> >>Dwayne -- Message posted via CarKB.com http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200506/1 |
Re: Having trouble keeping it going
http://www.4x4wire.com/jeep/tech/ele...jn-ignition99/
heres a link to it.....enjoy Robb S wrote: >If you haven't done it yet, you should perform what is known as the NUTTER >BYPASS. Do a search of this website, and you should find it. It HP to your >jeep. Much better performance. If you can't find it, I can email it to you. > >>I have an 89 Jeep YJ 4.2L and I'm having a hard time keeping the engine >>idling. I've rebuilt the carb and replaced a couple worn out vacuum lines. I >[quoted text clipped - 9 lines] >> >>Dwayne -- Message posted via CarKB.com http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200506/1 |
Re: Having trouble keeping it going
http://www.4x4wire.com/jeep/tech/ele...jn-ignition99/
heres a link to it.....enjoy Robb S wrote: >If you haven't done it yet, you should perform what is known as the NUTTER >BYPASS. Do a search of this website, and you should find it. It HP to your >jeep. Much better performance. If you can't find it, I can email it to you. > >>I have an 89 Jeep YJ 4.2L and I'm having a hard time keeping the engine >>idling. I've rebuilt the carb and replaced a couple worn out vacuum lines. I >[quoted text clipped - 9 lines] >> >>Dwayne -- Message posted via CarKB.com http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200506/1 |
Re: Having trouble keeping it going
Sorry, didn't see that bill had beat me to it.......
Dwayne Smith wrote: >I have an 89 Jeep YJ 4.2L and I'm having a hard time keeping the engine >idling. I've rebuilt the carb and replaced a couple worn out vacuum lines. I >would replace and check the locations of all the vacuum lines however the >diagrams I have are not very helpful. I've checked the timing and made sure >the vacuum advance mechanism is working also. I can work the idle screw so >it will idle high and that helps, but then the engine RPM's are over 2K at >idle. > >Any help would be great!! > >Thanks, > >Dwayne -- Message posted via CarKB.com http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200506/1 |
Re: Having trouble keeping it going
Sorry, didn't see that bill had beat me to it.......
Dwayne Smith wrote: >I have an 89 Jeep YJ 4.2L and I'm having a hard time keeping the engine >idling. I've rebuilt the carb and replaced a couple worn out vacuum lines. I >would replace and check the locations of all the vacuum lines however the >diagrams I have are not very helpful. I've checked the timing and made sure >the vacuum advance mechanism is working also. I can work the idle screw so >it will idle high and that helps, but then the engine RPM's are over 2K at >idle. > >Any help would be great!! > >Thanks, > >Dwayne -- Message posted via CarKB.com http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200506/1 |
Re: Having trouble keeping it going
Sorry, didn't see that bill had beat me to it.......
Dwayne Smith wrote: >I have an 89 Jeep YJ 4.2L and I'm having a hard time keeping the engine >idling. I've rebuilt the carb and replaced a couple worn out vacuum lines. I >would replace and check the locations of all the vacuum lines however the >diagrams I have are not very helpful. I've checked the timing and made sure >the vacuum advance mechanism is working also. I can work the idle screw so >it will idle high and that helps, but then the engine RPM's are over 2K at >idle. > >Any help would be great!! > >Thanks, > >Dwayne -- Message posted via CarKB.com http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200506/1 |
Re: Having trouble keeping it going
Sorry, didn't see that bill had beat me to it.......
Dwayne Smith wrote: >I have an 89 Jeep YJ 4.2L and I'm having a hard time keeping the engine >idling. I've rebuilt the carb and replaced a couple worn out vacuum lines. I >would replace and check the locations of all the vacuum lines however the >diagrams I have are not very helpful. I've checked the timing and made sure >the vacuum advance mechanism is working also. I can work the idle screw so >it will idle high and that helps, but then the engine RPM's are over 2K at >idle. > >Any help would be great!! > >Thanks, > >Dwayne -- Message posted via CarKB.com http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200506/1 |
Re: Having trouble keeping it going
The more the merrier. Just reinforces the idea with more links.
God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ "Robb S via CarKB.com" wrote: > > Sorry, didn't see that bill had beat me to it....... |
All times are GMT -4. The time now is 07:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands