Grand Wagoneer Roof Console
#2
Guest
Posts: n/a
Re: Grand Wagoneer Roof Console
Hi Dave,
On all the cars I've worked on, the plastic lens flexed enough with
the prying of a knife to pop out.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Any idea how to remove the Centre Roof Console from a '91 Grand Wagoneer ?
> It has 4 lights in in (2 in the front and 2 in the back) and I want to
> change the bulbs / inspect the wiring.
>
> Dave Milne, Scotland
On all the cars I've worked on, the plastic lens flexed enough with
the prying of a knife to pop out.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Any idea how to remove the Centre Roof Console from a '91 Grand Wagoneer ?
> It has 4 lights in in (2 in the front and 2 in the back) and I want to
> change the bulbs / inspect the wiring.
>
> Dave Milne, Scotland
#3
Guest
Posts: n/a
Re: Grand Wagoneer Roof Console
Hi Dave,
On all the cars I've worked on, the plastic lens flexed enough with
the prying of a knife to pop out.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Any idea how to remove the Centre Roof Console from a '91 Grand Wagoneer ?
> It has 4 lights in in (2 in the front and 2 in the back) and I want to
> change the bulbs / inspect the wiring.
>
> Dave Milne, Scotland
On all the cars I've worked on, the plastic lens flexed enough with
the prying of a knife to pop out.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Any idea how to remove the Centre Roof Console from a '91 Grand Wagoneer ?
> It has 4 lights in in (2 in the front and 2 in the back) and I want to
> change the bulbs / inspect the wiring.
>
> Dave Milne, Scotland
#4
Guest
Posts: n/a
Re: Grand Wagoneer Roof Console
Hi Dave,
On all the cars I've worked on, the plastic lens flexed enough with
the prying of a knife to pop out.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Any idea how to remove the Centre Roof Console from a '91 Grand Wagoneer ?
> It has 4 lights in in (2 in the front and 2 in the back) and I want to
> change the bulbs / inspect the wiring.
>
> Dave Milne, Scotland
On all the cars I've worked on, the plastic lens flexed enough with
the prying of a knife to pop out.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Any idea how to remove the Centre Roof Console from a '91 Grand Wagoneer ?
> It has 4 lights in in (2 in the front and 2 in the back) and I want to
> change the bulbs / inspect the wiring.
>
> Dave Milne, Scotland
#5
Guest
Posts: n/a
Re: Grand Wagoneer Roof Console
Dave:
To remove the map light lenses to change the bulbs, make a hook
in a heavy gauge paper clip and put it in the hole in the rear of
the lens. Pull down and the lens should release. To reinstall
place the front tab on the lens into the corresponding slot then
push the back up until it snaps into place.
To remove the whole console:
There is a hidden phillips head screw in the midline of the
console and about 2 inches in fromt of the compass/thermometer
towards the front of the Jeep. You can feel the indentation with
your fingers and there will probably be a subtle defect in the
cloth covering of that part of the console. If not, you must
discreetly puncture the material to insert the screwdriver.
Insert a screwdriver and loosen the screw completely.
Then open the sunglasses compartment and loosen that screw.
Then slide the whole console to the rear to disengage the bracket
and it will be free.
Disconnect the wiring harness connectors and you're done!!
Hope this helps,
Frank
"Dave Milne" <whoneeds@toknow.com> wrote in message
news:Fub3g.58937$wl.50160@text.news.blueyonder.co. uk...
> Any idea how to remove the Centre Roof Console from a '91 Grand
> Wagoneer ?
> It has 4 lights in in (2 in the front and 2 in the back) and I
> want to
> change the bulbs / inspect the wiring.
To remove the map light lenses to change the bulbs, make a hook
in a heavy gauge paper clip and put it in the hole in the rear of
the lens. Pull down and the lens should release. To reinstall
place the front tab on the lens into the corresponding slot then
push the back up until it snaps into place.
To remove the whole console:
There is a hidden phillips head screw in the midline of the
console and about 2 inches in fromt of the compass/thermometer
towards the front of the Jeep. You can feel the indentation with
your fingers and there will probably be a subtle defect in the
cloth covering of that part of the console. If not, you must
discreetly puncture the material to insert the screwdriver.
Insert a screwdriver and loosen the screw completely.
Then open the sunglasses compartment and loosen that screw.
Then slide the whole console to the rear to disengage the bracket
and it will be free.
Disconnect the wiring harness connectors and you're done!!
Hope this helps,
Frank
"Dave Milne" <whoneeds@toknow.com> wrote in message
news:Fub3g.58937$wl.50160@text.news.blueyonder.co. uk...
> Any idea how to remove the Centre Roof Console from a '91 Grand
> Wagoneer ?
> It has 4 lights in in (2 in the front and 2 in the back) and I
> want to
> change the bulbs / inspect the wiring.
#6
Guest
Posts: n/a
Re: Grand Wagoneer Roof Console
Dave:
To remove the map light lenses to change the bulbs, make a hook
in a heavy gauge paper clip and put it in the hole in the rear of
the lens. Pull down and the lens should release. To reinstall
place the front tab on the lens into the corresponding slot then
push the back up until it snaps into place.
To remove the whole console:
There is a hidden phillips head screw in the midline of the
console and about 2 inches in fromt of the compass/thermometer
towards the front of the Jeep. You can feel the indentation with
your fingers and there will probably be a subtle defect in the
cloth covering of that part of the console. If not, you must
discreetly puncture the material to insert the screwdriver.
Insert a screwdriver and loosen the screw completely.
Then open the sunglasses compartment and loosen that screw.
Then slide the whole console to the rear to disengage the bracket
and it will be free.
Disconnect the wiring harness connectors and you're done!!
Hope this helps,
Frank
"Dave Milne" <whoneeds@toknow.com> wrote in message
news:Fub3g.58937$wl.50160@text.news.blueyonder.co. uk...
> Any idea how to remove the Centre Roof Console from a '91 Grand
> Wagoneer ?
> It has 4 lights in in (2 in the front and 2 in the back) and I
> want to
> change the bulbs / inspect the wiring.
To remove the map light lenses to change the bulbs, make a hook
in a heavy gauge paper clip and put it in the hole in the rear of
the lens. Pull down and the lens should release. To reinstall
place the front tab on the lens into the corresponding slot then
push the back up until it snaps into place.
To remove the whole console:
There is a hidden phillips head screw in the midline of the
console and about 2 inches in fromt of the compass/thermometer
towards the front of the Jeep. You can feel the indentation with
your fingers and there will probably be a subtle defect in the
cloth covering of that part of the console. If not, you must
discreetly puncture the material to insert the screwdriver.
Insert a screwdriver and loosen the screw completely.
Then open the sunglasses compartment and loosen that screw.
Then slide the whole console to the rear to disengage the bracket
and it will be free.
Disconnect the wiring harness connectors and you're done!!
Hope this helps,
Frank
"Dave Milne" <whoneeds@toknow.com> wrote in message
news:Fub3g.58937$wl.50160@text.news.blueyonder.co. uk...
> Any idea how to remove the Centre Roof Console from a '91 Grand
> Wagoneer ?
> It has 4 lights in in (2 in the front and 2 in the back) and I
> want to
> change the bulbs / inspect the wiring.
#7
Guest
Posts: n/a
Re: Grand Wagoneer Roof Console
Dave:
To remove the map light lenses to change the bulbs, make a hook
in a heavy gauge paper clip and put it in the hole in the rear of
the lens. Pull down and the lens should release. To reinstall
place the front tab on the lens into the corresponding slot then
push the back up until it snaps into place.
To remove the whole console:
There is a hidden phillips head screw in the midline of the
console and about 2 inches in fromt of the compass/thermometer
towards the front of the Jeep. You can feel the indentation with
your fingers and there will probably be a subtle defect in the
cloth covering of that part of the console. If not, you must
discreetly puncture the material to insert the screwdriver.
Insert a screwdriver and loosen the screw completely.
Then open the sunglasses compartment and loosen that screw.
Then slide the whole console to the rear to disengage the bracket
and it will be free.
Disconnect the wiring harness connectors and you're done!!
Hope this helps,
Frank
"Dave Milne" <whoneeds@toknow.com> wrote in message
news:Fub3g.58937$wl.50160@text.news.blueyonder.co. uk...
> Any idea how to remove the Centre Roof Console from a '91 Grand
> Wagoneer ?
> It has 4 lights in in (2 in the front and 2 in the back) and I
> want to
> change the bulbs / inspect the wiring.
To remove the map light lenses to change the bulbs, make a hook
in a heavy gauge paper clip and put it in the hole in the rear of
the lens. Pull down and the lens should release. To reinstall
place the front tab on the lens into the corresponding slot then
push the back up until it snaps into place.
To remove the whole console:
There is a hidden phillips head screw in the midline of the
console and about 2 inches in fromt of the compass/thermometer
towards the front of the Jeep. You can feel the indentation with
your fingers and there will probably be a subtle defect in the
cloth covering of that part of the console. If not, you must
discreetly puncture the material to insert the screwdriver.
Insert a screwdriver and loosen the screw completely.
Then open the sunglasses compartment and loosen that screw.
Then slide the whole console to the rear to disengage the bracket
and it will be free.
Disconnect the wiring harness connectors and you're done!!
Hope this helps,
Frank
"Dave Milne" <whoneeds@toknow.com> wrote in message
news:Fub3g.58937$wl.50160@text.news.blueyonder.co. uk...
> Any idea how to remove the Centre Roof Console from a '91 Grand
> Wagoneer ?
> It has 4 lights in in (2 in the front and 2 in the back) and I
> want to
> change the bulbs / inspect the wiring.
#8
Guest
Posts: n/a
Re: Grand Wagoneer Roof Console
Great, thanks !
Dave.
"F. J. Townsend, III" <ftownsen@verizon.net> wrote in message
news:z3i3g.10801$ww6.4057@trnddc05...
> Dave:
>
> To remove the map light lenses to change the bulbs, make a hook
> in a heavy gauge paper clip and put it in the hole in the rear of
> the lens. Pull down and the lens should release. To reinstall
> place the front tab on the lens into the corresponding slot then
> push the back up until it snaps into place.
>
> To remove the whole console:
>
> There is a hidden phillips head screw in the midline of the
> console and about 2 inches in fromt of the compass/thermometer
> towards the front of the Jeep. You can feel the indentation with
> your fingers and there will probably be a subtle defect in the
> cloth covering of that part of the console. If not, you must
> discreetly puncture the material to insert the screwdriver.
>
> Insert a screwdriver and loosen the screw completely.
>
> Then open the sunglasses compartment and loosen that screw.
>
> Then slide the whole console to the rear to disengage the bracket
> and it will be free.
>
> Disconnect the wiring harness connectors and you're done!!
>
> Hope this helps,
>
> Frank
>
>
> "Dave Milne" <whoneeds@toknow.com> wrote in message
> news:Fub3g.58937$wl.50160@text.news.blueyonder.co. uk...
> > Any idea how to remove the Centre Roof Console from a '91 Grand
> > Wagoneer ?
> > It has 4 lights in in (2 in the front and 2 in the back) and I
> > want to
> > change the bulbs / inspect the wiring.
>
>
Dave.
"F. J. Townsend, III" <ftownsen@verizon.net> wrote in message
news:z3i3g.10801$ww6.4057@trnddc05...
> Dave:
>
> To remove the map light lenses to change the bulbs, make a hook
> in a heavy gauge paper clip and put it in the hole in the rear of
> the lens. Pull down and the lens should release. To reinstall
> place the front tab on the lens into the corresponding slot then
> push the back up until it snaps into place.
>
> To remove the whole console:
>
> There is a hidden phillips head screw in the midline of the
> console and about 2 inches in fromt of the compass/thermometer
> towards the front of the Jeep. You can feel the indentation with
> your fingers and there will probably be a subtle defect in the
> cloth covering of that part of the console. If not, you must
> discreetly puncture the material to insert the screwdriver.
>
> Insert a screwdriver and loosen the screw completely.
>
> Then open the sunglasses compartment and loosen that screw.
>
> Then slide the whole console to the rear to disengage the bracket
> and it will be free.
>
> Disconnect the wiring harness connectors and you're done!!
>
> Hope this helps,
>
> Frank
>
>
> "Dave Milne" <whoneeds@toknow.com> wrote in message
> news:Fub3g.58937$wl.50160@text.news.blueyonder.co. uk...
> > Any idea how to remove the Centre Roof Console from a '91 Grand
> > Wagoneer ?
> > It has 4 lights in in (2 in the front and 2 in the back) and I
> > want to
> > change the bulbs / inspect the wiring.
>
>
#9
Guest
Posts: n/a
Re: Grand Wagoneer Roof Console
Great, thanks !
Dave.
"F. J. Townsend, III" <ftownsen@verizon.net> wrote in message
news:z3i3g.10801$ww6.4057@trnddc05...
> Dave:
>
> To remove the map light lenses to change the bulbs, make a hook
> in a heavy gauge paper clip and put it in the hole in the rear of
> the lens. Pull down and the lens should release. To reinstall
> place the front tab on the lens into the corresponding slot then
> push the back up until it snaps into place.
>
> To remove the whole console:
>
> There is a hidden phillips head screw in the midline of the
> console and about 2 inches in fromt of the compass/thermometer
> towards the front of the Jeep. You can feel the indentation with
> your fingers and there will probably be a subtle defect in the
> cloth covering of that part of the console. If not, you must
> discreetly puncture the material to insert the screwdriver.
>
> Insert a screwdriver and loosen the screw completely.
>
> Then open the sunglasses compartment and loosen that screw.
>
> Then slide the whole console to the rear to disengage the bracket
> and it will be free.
>
> Disconnect the wiring harness connectors and you're done!!
>
> Hope this helps,
>
> Frank
>
>
> "Dave Milne" <whoneeds@toknow.com> wrote in message
> news:Fub3g.58937$wl.50160@text.news.blueyonder.co. uk...
> > Any idea how to remove the Centre Roof Console from a '91 Grand
> > Wagoneer ?
> > It has 4 lights in in (2 in the front and 2 in the back) and I
> > want to
> > change the bulbs / inspect the wiring.
>
>
Dave.
"F. J. Townsend, III" <ftownsen@verizon.net> wrote in message
news:z3i3g.10801$ww6.4057@trnddc05...
> Dave:
>
> To remove the map light lenses to change the bulbs, make a hook
> in a heavy gauge paper clip and put it in the hole in the rear of
> the lens. Pull down and the lens should release. To reinstall
> place the front tab on the lens into the corresponding slot then
> push the back up until it snaps into place.
>
> To remove the whole console:
>
> There is a hidden phillips head screw in the midline of the
> console and about 2 inches in fromt of the compass/thermometer
> towards the front of the Jeep. You can feel the indentation with
> your fingers and there will probably be a subtle defect in the
> cloth covering of that part of the console. If not, you must
> discreetly puncture the material to insert the screwdriver.
>
> Insert a screwdriver and loosen the screw completely.
>
> Then open the sunglasses compartment and loosen that screw.
>
> Then slide the whole console to the rear to disengage the bracket
> and it will be free.
>
> Disconnect the wiring harness connectors and you're done!!
>
> Hope this helps,
>
> Frank
>
>
> "Dave Milne" <whoneeds@toknow.com> wrote in message
> news:Fub3g.58937$wl.50160@text.news.blueyonder.co. uk...
> > Any idea how to remove the Centre Roof Console from a '91 Grand
> > Wagoneer ?
> > It has 4 lights in in (2 in the front and 2 in the back) and I
> > want to
> > change the bulbs / inspect the wiring.
>
>
#10
Guest
Posts: n/a
Re: Grand Wagoneer Roof Console
Great, thanks !
Dave.
"F. J. Townsend, III" <ftownsen@verizon.net> wrote in message
news:z3i3g.10801$ww6.4057@trnddc05...
> Dave:
>
> To remove the map light lenses to change the bulbs, make a hook
> in a heavy gauge paper clip and put it in the hole in the rear of
> the lens. Pull down and the lens should release. To reinstall
> place the front tab on the lens into the corresponding slot then
> push the back up until it snaps into place.
>
> To remove the whole console:
>
> There is a hidden phillips head screw in the midline of the
> console and about 2 inches in fromt of the compass/thermometer
> towards the front of the Jeep. You can feel the indentation with
> your fingers and there will probably be a subtle defect in the
> cloth covering of that part of the console. If not, you must
> discreetly puncture the material to insert the screwdriver.
>
> Insert a screwdriver and loosen the screw completely.
>
> Then open the sunglasses compartment and loosen that screw.
>
> Then slide the whole console to the rear to disengage the bracket
> and it will be free.
>
> Disconnect the wiring harness connectors and you're done!!
>
> Hope this helps,
>
> Frank
>
>
> "Dave Milne" <whoneeds@toknow.com> wrote in message
> news:Fub3g.58937$wl.50160@text.news.blueyonder.co. uk...
> > Any idea how to remove the Centre Roof Console from a '91 Grand
> > Wagoneer ?
> > It has 4 lights in in (2 in the front and 2 in the back) and I
> > want to
> > change the bulbs / inspect the wiring.
>
>
Dave.
"F. J. Townsend, III" <ftownsen@verizon.net> wrote in message
news:z3i3g.10801$ww6.4057@trnddc05...
> Dave:
>
> To remove the map light lenses to change the bulbs, make a hook
> in a heavy gauge paper clip and put it in the hole in the rear of
> the lens. Pull down and the lens should release. To reinstall
> place the front tab on the lens into the corresponding slot then
> push the back up until it snaps into place.
>
> To remove the whole console:
>
> There is a hidden phillips head screw in the midline of the
> console and about 2 inches in fromt of the compass/thermometer
> towards the front of the Jeep. You can feel the indentation with
> your fingers and there will probably be a subtle defect in the
> cloth covering of that part of the console. If not, you must
> discreetly puncture the material to insert the screwdriver.
>
> Insert a screwdriver and loosen the screw completely.
>
> Then open the sunglasses compartment and loosen that screw.
>
> Then slide the whole console to the rear to disengage the bracket
> and it will be free.
>
> Disconnect the wiring harness connectors and you're done!!
>
> Hope this helps,
>
> Frank
>
>
> "Dave Milne" <whoneeds@toknow.com> wrote in message
> news:Fub3g.58937$wl.50160@text.news.blueyonder.co. uk...
> > Any idea how to remove the Centre Roof Console from a '91 Grand
> > Wagoneer ?
> > It has 4 lights in in (2 in the front and 2 in the back) and I
> > want to
> > change the bulbs / inspect the wiring.
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)