Snow did pass the time by typing:
> Just added a second jeep to the drive, a 1993 grand (ZJ??), anyways the only
> fault it has is that the oil level sending unit is wonkie, anyone know
> where I can get info on this thing? wiring diagram? or ??? .

It's basically a switch, cleaning the connector always works for me.
If you need schematics on anything let me know. Some I have scanned.

--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!

 

Snow did pass the time by typing:
> Just added a second jeep to the drive, a 1993 grand (ZJ??), anyways the only
> fault it has is that the oil level sending unit is wonkie, anyone know
> where I can get info on this thing? wiring diagram? or ??? .

It's basically a switch, cleaning the connector always works for me.
If you need schematics on anything let me know. Some I have scanned.

--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!

 

Snow did pass the time by typing:
> Just added a second jeep to the drive, a 1993 grand (ZJ??), anyways the only
> fault it has is that the oil level sending unit is wonkie, anyone know
> where I can get info on this thing? wiring diagram? or ??? .

It's basically a switch, cleaning the connector always works for me.
If you need schematics on anything let me know. Some I have scanned.

--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!

 

Thanks again gents.

Snow...

"Snow" <snowbal@sympatico.ca> wrote in message
news:AwVee.22036$VL3.832360@news20.bellglobal.com. ..
> Just added a second jeep to the drive, a 1993 grand (ZJ??), anyways the
> only fault it has is that the oil level sending unit is wonkie, anyone
> know where I can get info on this thing? wiring diagram? or ??? .
>
> Thankies
> Snow...
>
>

 

Thanks again gents.

Snow...

"Snow" <snowbal@sympatico.ca> wrote in message
news:AwVee.22036$VL3.832360@news20.bellglobal.com. ..
> Just added a second jeep to the drive, a 1993 grand (ZJ??), anyways the
> only fault it has is that the oil level sending unit is wonkie, anyone
> know where I can get info on this thing? wiring diagram? or ??? .
>
> Thankies
> Snow...
>
>

 

Thanks again gents.

Snow...

"Snow" <snowbal@sympatico.ca> wrote in message
news:AwVee.22036$VL3.832360@news20.bellglobal.com. ..
> Just added a second jeep to the drive, a 1993 grand (ZJ??), anyways the
> only fault it has is that the oil level sending unit is wonkie, anyone
> know where I can get info on this thing? wiring diagram? or ??? .
>
> Thankies
> Snow...
>
>

 

Thanks again gents.

Snow...

"Snow" <snowbal@sympatico.ca> wrote in message
news:AwVee.22036$VL3.832360@news20.bellglobal.com. ..
> Just added a second jeep to the drive, a 1993 grand (ZJ??), anyways the
> only fault it has is that the oil level sending unit is wonkie, anyone
> know where I can get info on this thing? wiring diagram? or ??? .
>
> Thankies
> Snow...
>
>

 

Yep its oil level sensor, the info centre display says it is... I have
physically checked the oil and its full..

Snow...

"----" <LeadWinger> wrote in message
news:jbho71dsv42iim75t8qn7kvhp04kgr6l8a@4ax.com...
> Are you sure it is the oil level sensor? There was a service bulletin
> on the '93 V8 for this problem. The original fix was to change the
> level sensor, but it didn't help. The solution was to change the oil
> level to 5-1/2 qts instead of 5. They also had a modified dipstick
> showing the new setting, but you could do it with a file on the old
> one. The sensor for both the V-8 and I-6 is in the side of the oil
> pan on the passenger side.
>
> On Fri, 6 May 2005 22:12:51 -0400, "Snow" <snowbal@sympatico.ca>
> wrote:
>
>>Just added a second jeep to the drive, a 1993 grand (ZJ??), anyways the
>>only
>>fault it has is that the oil level sending unit is wonkie, anyone know
>>where I can get info on this thing? wiring diagram? or ??? .
>>
>>Thankies
>>Snow...
>>
>

 

Yep its oil level sensor, the info centre display says it is... I have
physically checked the oil and its full..

Snow...

"----" <LeadWinger> wrote in message
news:jbho71dsv42iim75t8qn7kvhp04kgr6l8a@4ax.com...
> Are you sure it is the oil level sensor? There was a service bulletin
> on the '93 V8 for this problem. The original fix was to change the
> level sensor, but it didn't help. The solution was to change the oil
> level to 5-1/2 qts instead of 5. They also had a modified dipstick
> showing the new setting, but you could do it with a file on the old
> one. The sensor for both the V-8 and I-6 is in the side of the oil
> pan on the passenger side.
>
> On Fri, 6 May 2005 22:12:51 -0400, "Snow" <snowbal@sympatico.ca>
> wrote:
>
>>Just added a second jeep to the drive, a 1993 grand (ZJ??), anyways the
>>only
>>fault it has is that the oil level sending unit is wonkie, anyone know
>>where I can get info on this thing? wiring diagram? or ??? .
>>
>>Thankies
>>Snow...
>>
>

 

Yep its oil level sensor, the info centre display says it is... I have
physically checked the oil and its full..

Snow...

"----" <LeadWinger> wrote in message
news:jbho71dsv42iim75t8qn7kvhp04kgr6l8a@4ax.com...
> Are you sure it is the oil level sensor? There was a service bulletin
> on the '93 V8 for this problem. The original fix was to change the
> level sensor, but it didn't help. The solution was to change the oil
> level to 5-1/2 qts instead of 5. They also had a modified dipstick
> showing the new setting, but you could do it with a file on the old
> one. The sensor for both the V-8 and I-6 is in the side of the oil
> pan on the passenger side.
>
> On Fri, 6 May 2005 22:12:51 -0400, "Snow" <snowbal@sympatico.ca>
> wrote:
>
>>Just added a second jeep to the drive, a 1993 grand (ZJ??), anyways the
>>only
>>fault it has is that the oil level sending unit is wonkie, anyone know
>>where I can get info on this thing? wiring diagram? or ??? .
>>
>>Thankies
>>Snow...
>>
>