Good use for scrap metal
#71
Guest
Posts: n/a
Re: Good use for scrap metal
In article <bn6co4$tuuur$1@ID-177997.news.uni-berlin.de>, "bob zee"
<cam509@linuxmail.org> writes:
>sorry, i meant it to be a joke. you know, seriously, that carpet is really
>nice. a couple years ago my wife and i got new carpet in the dining room.
>even after taking our shoes off at the door, it still turned to crap rather
>quickly - wear patterns and all that.
IMHO anyone with kids under the age of 10 shouldn't even install carpet. You
should see my living room.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
<cam509@linuxmail.org> writes:
>sorry, i meant it to be a joke. you know, seriously, that carpet is really
>nice. a couple years ago my wife and i got new carpet in the dining room.
>even after taking our shoes off at the door, it still turned to crap rather
>quickly - wear patterns and all that.
IMHO anyone with kids under the age of 10 shouldn't even install carpet. You
should see my living room.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
#72
Guest
Posts: n/a
Re: Good use for scrap metal
In article <bn6co4$tuuur$1@ID-177997.news.uni-berlin.de>, "bob zee"
<cam509@linuxmail.org> writes:
>sorry, i meant it to be a joke. you know, seriously, that carpet is really
>nice. a couple years ago my wife and i got new carpet in the dining room.
>even after taking our shoes off at the door, it still turned to crap rather
>quickly - wear patterns and all that.
IMHO anyone with kids under the age of 10 shouldn't even install carpet. You
should see my living room.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
<cam509@linuxmail.org> writes:
>sorry, i meant it to be a joke. you know, seriously, that carpet is really
>nice. a couple years ago my wife and i got new carpet in the dining room.
>even after taking our shoes off at the door, it still turned to crap rather
>quickly - wear patterns and all that.
IMHO anyone with kids under the age of 10 shouldn't even install carpet. You
should see my living room.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
#73
Guest
Posts: n/a
Re: Good use for scrap metal
In article <bn6co4$tuuur$1@ID-177997.news.uni-berlin.de>, "bob zee"
<cam509@linuxmail.org> writes:
>sorry, i meant it to be a joke. you know, seriously, that carpet is really
>nice. a couple years ago my wife and i got new carpet in the dining room.
>even after taking our shoes off at the door, it still turned to crap rather
>quickly - wear patterns and all that.
IMHO anyone with kids under the age of 10 shouldn't even install carpet. You
should see my living room.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
<cam509@linuxmail.org> writes:
>sorry, i meant it to be a joke. you know, seriously, that carpet is really
>nice. a couple years ago my wife and i got new carpet in the dining room.
>even after taking our shoes off at the door, it still turned to crap rather
>quickly - wear patterns and all that.
IMHO anyone with kids under the age of 10 shouldn't even install carpet. You
should see my living room.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
#74
Guest
Posts: n/a
Re: Good use for scrap metal also
On Wed, 22 Oct 2003 14:25:53 -0400, "cantrellm"
<cantrelm@bellsouth.net> shared the following:
>let me try that again!!
>
>http://www.cantrell.com/scrap/shifter21.JPG
Oh, dude. That is SWEET!!!
>
>"cantrellm" <cantrelm@bellsouth.net> wrote in message
>news:rDzlb.231$Lj6.193@bignews3.bellsouth.net.. .
>> Good job Travis,
>>
>> check out what I made from scrap at my place of work. We do all stainless
>> steel and aluminum work here. this is a polished alum. shift **** I had
>> them make out of scrap!!
>>
>> http://cantrell.com/scrap/shifter21.jpg
>>
>> Tom Reins
>> 2000 TJ Sport
>> Just paid off
>>
>>
>> "travis" <travist34removethis@hotmail.com> wrote in message
>> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
>> > They had a pile of "to be thrown away" metal where I work. They had
>> > some brackets that are used to rack mount network equipment that was
>> > made of some pretty substantial steel. I have two holes in the tub on
>> > my CJ, so I measured them and...
>> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
>> > Now I have patches for the holes that I can weld in. Check out how
>> > thick they are:
>> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
>> >
>> > After I get them welded in I'm going to scuff up the entire inside of
>> > the tub, then wipe it down with acetone, then apply two layers of
>> > "Herculiner" the whole shootin' match. I'll take pictures of the
>> > progress. I plan on doing this Saturday.
>> >
>> >
>> > --
>> > Travis
>> > http://jeepadventures.dyndns.org/jeep.html
>> > The meek shall inherit the earth. After I'm finished with it.
>> > :wq!
>>
>>
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<cantrelm@bellsouth.net> shared the following:
>let me try that again!!
>
>http://www.cantrell.com/scrap/shifter21.JPG
Oh, dude. That is SWEET!!!
>
>"cantrellm" <cantrelm@bellsouth.net> wrote in message
>news:rDzlb.231$Lj6.193@bignews3.bellsouth.net.. .
>> Good job Travis,
>>
>> check out what I made from scrap at my place of work. We do all stainless
>> steel and aluminum work here. this is a polished alum. shift **** I had
>> them make out of scrap!!
>>
>> http://cantrell.com/scrap/shifter21.jpg
>>
>> Tom Reins
>> 2000 TJ Sport
>> Just paid off
>>
>>
>> "travis" <travist34removethis@hotmail.com> wrote in message
>> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
>> > They had a pile of "to be thrown away" metal where I work. They had
>> > some brackets that are used to rack mount network equipment that was
>> > made of some pretty substantial steel. I have two holes in the tub on
>> > my CJ, so I measured them and...
>> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
>> > Now I have patches for the holes that I can weld in. Check out how
>> > thick they are:
>> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
>> >
>> > After I get them welded in I'm going to scuff up the entire inside of
>> > the tub, then wipe it down with acetone, then apply two layers of
>> > "Herculiner" the whole shootin' match. I'll take pictures of the
>> > progress. I plan on doing this Saturday.
>> >
>> >
>> > --
>> > Travis
>> > http://jeepadventures.dyndns.org/jeep.html
>> > The meek shall inherit the earth. After I'm finished with it.
>> > :wq!
>>
>>
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#75
Guest
Posts: n/a
Re: Good use for scrap metal also
On Wed, 22 Oct 2003 14:25:53 -0400, "cantrellm"
<cantrelm@bellsouth.net> shared the following:
>let me try that again!!
>
>http://www.cantrell.com/scrap/shifter21.JPG
Oh, dude. That is SWEET!!!
>
>"cantrellm" <cantrelm@bellsouth.net> wrote in message
>news:rDzlb.231$Lj6.193@bignews3.bellsouth.net.. .
>> Good job Travis,
>>
>> check out what I made from scrap at my place of work. We do all stainless
>> steel and aluminum work here. this is a polished alum. shift **** I had
>> them make out of scrap!!
>>
>> http://cantrell.com/scrap/shifter21.jpg
>>
>> Tom Reins
>> 2000 TJ Sport
>> Just paid off
>>
>>
>> "travis" <travist34removethis@hotmail.com> wrote in message
>> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
>> > They had a pile of "to be thrown away" metal where I work. They had
>> > some brackets that are used to rack mount network equipment that was
>> > made of some pretty substantial steel. I have two holes in the tub on
>> > my CJ, so I measured them and...
>> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
>> > Now I have patches for the holes that I can weld in. Check out how
>> > thick they are:
>> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
>> >
>> > After I get them welded in I'm going to scuff up the entire inside of
>> > the tub, then wipe it down with acetone, then apply two layers of
>> > "Herculiner" the whole shootin' match. I'll take pictures of the
>> > progress. I plan on doing this Saturday.
>> >
>> >
>> > --
>> > Travis
>> > http://jeepadventures.dyndns.org/jeep.html
>> > The meek shall inherit the earth. After I'm finished with it.
>> > :wq!
>>
>>
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<cantrelm@bellsouth.net> shared the following:
>let me try that again!!
>
>http://www.cantrell.com/scrap/shifter21.JPG
Oh, dude. That is SWEET!!!
>
>"cantrellm" <cantrelm@bellsouth.net> wrote in message
>news:rDzlb.231$Lj6.193@bignews3.bellsouth.net.. .
>> Good job Travis,
>>
>> check out what I made from scrap at my place of work. We do all stainless
>> steel and aluminum work here. this is a polished alum. shift **** I had
>> them make out of scrap!!
>>
>> http://cantrell.com/scrap/shifter21.jpg
>>
>> Tom Reins
>> 2000 TJ Sport
>> Just paid off
>>
>>
>> "travis" <travist34removethis@hotmail.com> wrote in message
>> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
>> > They had a pile of "to be thrown away" metal where I work. They had
>> > some brackets that are used to rack mount network equipment that was
>> > made of some pretty substantial steel. I have two holes in the tub on
>> > my CJ, so I measured them and...
>> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
>> > Now I have patches for the holes that I can weld in. Check out how
>> > thick they are:
>> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
>> >
>> > After I get them welded in I'm going to scuff up the entire inside of
>> > the tub, then wipe it down with acetone, then apply two layers of
>> > "Herculiner" the whole shootin' match. I'll take pictures of the
>> > progress. I plan on doing this Saturday.
>> >
>> >
>> > --
>> > Travis
>> > http://jeepadventures.dyndns.org/jeep.html
>> > The meek shall inherit the earth. After I'm finished with it.
>> > :wq!
>>
>>
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#76
Guest
Posts: n/a
Re: Good use for scrap metal also
On Wed, 22 Oct 2003 14:25:53 -0400, "cantrellm"
<cantrelm@bellsouth.net> shared the following:
>let me try that again!!
>
>http://www.cantrell.com/scrap/shifter21.JPG
Oh, dude. That is SWEET!!!
>
>"cantrellm" <cantrelm@bellsouth.net> wrote in message
>news:rDzlb.231$Lj6.193@bignews3.bellsouth.net.. .
>> Good job Travis,
>>
>> check out what I made from scrap at my place of work. We do all stainless
>> steel and aluminum work here. this is a polished alum. shift **** I had
>> them make out of scrap!!
>>
>> http://cantrell.com/scrap/shifter21.jpg
>>
>> Tom Reins
>> 2000 TJ Sport
>> Just paid off
>>
>>
>> "travis" <travist34removethis@hotmail.com> wrote in message
>> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
>> > They had a pile of "to be thrown away" metal where I work. They had
>> > some brackets that are used to rack mount network equipment that was
>> > made of some pretty substantial steel. I have two holes in the tub on
>> > my CJ, so I measured them and...
>> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
>> > Now I have patches for the holes that I can weld in. Check out how
>> > thick they are:
>> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
>> >
>> > After I get them welded in I'm going to scuff up the entire inside of
>> > the tub, then wipe it down with acetone, then apply two layers of
>> > "Herculiner" the whole shootin' match. I'll take pictures of the
>> > progress. I plan on doing this Saturday.
>> >
>> >
>> > --
>> > Travis
>> > http://jeepadventures.dyndns.org/jeep.html
>> > The meek shall inherit the earth. After I'm finished with it.
>> > :wq!
>>
>>
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<cantrelm@bellsouth.net> shared the following:
>let me try that again!!
>
>http://www.cantrell.com/scrap/shifter21.JPG
Oh, dude. That is SWEET!!!
>
>"cantrellm" <cantrelm@bellsouth.net> wrote in message
>news:rDzlb.231$Lj6.193@bignews3.bellsouth.net.. .
>> Good job Travis,
>>
>> check out what I made from scrap at my place of work. We do all stainless
>> steel and aluminum work here. this is a polished alum. shift **** I had
>> them make out of scrap!!
>>
>> http://cantrell.com/scrap/shifter21.jpg
>>
>> Tom Reins
>> 2000 TJ Sport
>> Just paid off
>>
>>
>> "travis" <travist34removethis@hotmail.com> wrote in message
>> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
>> > They had a pile of "to be thrown away" metal where I work. They had
>> > some brackets that are used to rack mount network equipment that was
>> > made of some pretty substantial steel. I have two holes in the tub on
>> > my CJ, so I measured them and...
>> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
>> > Now I have patches for the holes that I can weld in. Check out how
>> > thick they are:
>> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
>> >
>> > After I get them welded in I'm going to scuff up the entire inside of
>> > the tub, then wipe it down with acetone, then apply two layers of
>> > "Herculiner" the whole shootin' match. I'll take pictures of the
>> > progress. I plan on doing this Saturday.
>> >
>> >
>> > --
>> > Travis
>> > http://jeepadventures.dyndns.org/jeep.html
>> > The meek shall inherit the earth. After I'm finished with it.
>> > :wq!
>>
>>
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#77
Guest
Posts: n/a
Re: Good use for scrap metal
You have Rug Rats? ;-)
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> IMHO anyone with kids under the age of 10 shouldn't even install carpet. You
> should see my living room.
> * * *
> Matt Macchiarolo
> www.townpeddler.com
> www.wolverine4wd.org
> http://wolverine4wd.org/rigs/macchiarolo_ml.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> IMHO anyone with kids under the age of 10 shouldn't even install carpet. You
> should see my living room.
> * * *
> Matt Macchiarolo
> www.townpeddler.com
> www.wolverine4wd.org
> http://wolverine4wd.org/rigs/macchiarolo_ml.html
#78
Guest
Posts: n/a
Re: Good use for scrap metal
You have Rug Rats? ;-)
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> IMHO anyone with kids under the age of 10 shouldn't even install carpet. You
> should see my living room.
> * * *
> Matt Macchiarolo
> www.townpeddler.com
> www.wolverine4wd.org
> http://wolverine4wd.org/rigs/macchiarolo_ml.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> IMHO anyone with kids under the age of 10 shouldn't even install carpet. You
> should see my living room.
> * * *
> Matt Macchiarolo
> www.townpeddler.com
> www.wolverine4wd.org
> http://wolverine4wd.org/rigs/macchiarolo_ml.html
#79
Guest
Posts: n/a
Re: Good use for scrap metal
You have Rug Rats? ;-)
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> IMHO anyone with kids under the age of 10 shouldn't even install carpet. You
> should see my living room.
> * * *
> Matt Macchiarolo
> www.townpeddler.com
> www.wolverine4wd.org
> http://wolverine4wd.org/rigs/macchiarolo_ml.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> IMHO anyone with kids under the age of 10 shouldn't even install carpet. You
> should see my living room.
> * * *
> Matt Macchiarolo
> www.townpeddler.com
> www.wolverine4wd.org
> http://wolverine4wd.org/rigs/macchiarolo_ml.html
#80
Guest
Posts: n/a
Re: Good use for scrap metal
On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
shared the following:
>Jeez, Travis! Cut that out! I don't have the budget for parts right now
>and you're making me feel all frustrated!
>
>What else did you order??? Can I see? ;-)
>
>--
>Jim
Only this: :-)
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
shared the following:
>Jeez, Travis! Cut that out! I don't have the budget for parts right now
>and you're making me feel all frustrated!
>
>What else did you order??? Can I see? ;-)
>
>--
>Jim
Only this: :-)
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!