Good use for scrap metal
#101
Guest
Posts: n/a
Re: Good use for scrap metal
Ages 8, 4, and 2. Oldest and youngest are boys, the youngest is the worst
offender when it comes to trashing carpet. :-)
In article <3F96F159.18124FB4@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
> You have Rug Rats? ;-)
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Matt Macchiarolo wrote:
>>
>> IMHO anyone with kids under the age of 10 shouldn't even install carpet.
>You
>> should see my living room.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
offender when it comes to trashing carpet. :-)
In article <3F96F159.18124FB4@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
> You have Rug Rats? ;-)
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Matt Macchiarolo wrote:
>>
>> IMHO anyone with kids under the age of 10 shouldn't even install carpet.
>You
>> should see my living room.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
#102
Guest
Posts: n/a
Re: Good use for scrap metal
Ages 8, 4, and 2. Oldest and youngest are boys, the youngest is the worst
offender when it comes to trashing carpet. :-)
In article <3F96F159.18124FB4@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
> You have Rug Rats? ;-)
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Matt Macchiarolo wrote:
>>
>> IMHO anyone with kids under the age of 10 shouldn't even install carpet.
>You
>> should see my living room.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
offender when it comes to trashing carpet. :-)
In article <3F96F159.18124FB4@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
> You have Rug Rats? ;-)
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Matt Macchiarolo wrote:
>>
>> IMHO anyone with kids under the age of 10 shouldn't even install carpet.
>You
>> should see my living room.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
#103
Guest
Posts: n/a
Re: Good use for scrap metal
Ages 8, 4, and 2. Oldest and youngest are boys, the youngest is the worst
offender when it comes to trashing carpet. :-)
In article <3F96F159.18124FB4@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
> You have Rug Rats? ;-)
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Matt Macchiarolo wrote:
>>
>> IMHO anyone with kids under the age of 10 shouldn't even install carpet.
>You
>> should see my living room.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
offender when it comes to trashing carpet. :-)
In article <3F96F159.18124FB4@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
> You have Rug Rats? ;-)
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Matt Macchiarolo wrote:
>>
>> IMHO anyone with kids under the age of 10 shouldn't even install carpet.
>You
>> should see my living room.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
#104
Guest
Posts: n/a
Re: Good use for scrap metal
Ok, you have something strange.....
My CJ7 is a mirror image of that! I just went and looked....
Mike
travis wrote:
>
> On Wed, 22 Oct 2003 17:20:39 -0400, Mike Romain
> <romainm@sympatico.ca> shared the following:
>
> >That sure wouldn't fit my CJ7!
> >
> >That is a YJ plate!
>
> It looks exactly like the plate I have in my CJ-5 now and it at least
> says: Jeep CJ5 CJ7 CJ8 Shifter plate and boot
> Here's what's currently in my CJ-5. I realize the boot on the tranny
> shifter is not the correct one:
> http://jeepadventures.dyndns.org/jeep/dayone/07.jpg
>
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >travis wrote:
> >>
> >> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
> >> shared the following:
> >>
> >> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
> >> >and you're making me feel all frustrated!
> >> >
> >> >What else did you order??? Can I see? ;-)
> >> >
> >> >--
> >> >Jim
> >>
> >> Only this: :-)
> >> http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
> >>
> >> --
> >> Travis
> >> http://jeepadventures.dyndns.org/jeep.html
> >> The meek shall inherit the earth. After I'm finished with it.
> >> :wq!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
My CJ7 is a mirror image of that! I just went and looked....
Mike
travis wrote:
>
> On Wed, 22 Oct 2003 17:20:39 -0400, Mike Romain
> <romainm@sympatico.ca> shared the following:
>
> >That sure wouldn't fit my CJ7!
> >
> >That is a YJ plate!
>
> It looks exactly like the plate I have in my CJ-5 now and it at least
> says: Jeep CJ5 CJ7 CJ8 Shifter plate and boot
> Here's what's currently in my CJ-5. I realize the boot on the tranny
> shifter is not the correct one:
> http://jeepadventures.dyndns.org/jeep/dayone/07.jpg
>
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >travis wrote:
> >>
> >> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
> >> shared the following:
> >>
> >> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
> >> >and you're making me feel all frustrated!
> >> >
> >> >What else did you order??? Can I see? ;-)
> >> >
> >> >--
> >> >Jim
> >>
> >> Only this: :-)
> >> http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
> >>
> >> --
> >> Travis
> >> http://jeepadventures.dyndns.org/jeep.html
> >> The meek shall inherit the earth. After I'm finished with it.
> >> :wq!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
#105
Guest
Posts: n/a
Re: Good use for scrap metal
Ok, you have something strange.....
My CJ7 is a mirror image of that! I just went and looked....
Mike
travis wrote:
>
> On Wed, 22 Oct 2003 17:20:39 -0400, Mike Romain
> <romainm@sympatico.ca> shared the following:
>
> >That sure wouldn't fit my CJ7!
> >
> >That is a YJ plate!
>
> It looks exactly like the plate I have in my CJ-5 now and it at least
> says: Jeep CJ5 CJ7 CJ8 Shifter plate and boot
> Here's what's currently in my CJ-5. I realize the boot on the tranny
> shifter is not the correct one:
> http://jeepadventures.dyndns.org/jeep/dayone/07.jpg
>
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >travis wrote:
> >>
> >> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
> >> shared the following:
> >>
> >> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
> >> >and you're making me feel all frustrated!
> >> >
> >> >What else did you order??? Can I see? ;-)
> >> >
> >> >--
> >> >Jim
> >>
> >> Only this: :-)
> >> http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
> >>
> >> --
> >> Travis
> >> http://jeepadventures.dyndns.org/jeep.html
> >> The meek shall inherit the earth. After I'm finished with it.
> >> :wq!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
My CJ7 is a mirror image of that! I just went and looked....
Mike
travis wrote:
>
> On Wed, 22 Oct 2003 17:20:39 -0400, Mike Romain
> <romainm@sympatico.ca> shared the following:
>
> >That sure wouldn't fit my CJ7!
> >
> >That is a YJ plate!
>
> It looks exactly like the plate I have in my CJ-5 now and it at least
> says: Jeep CJ5 CJ7 CJ8 Shifter plate and boot
> Here's what's currently in my CJ-5. I realize the boot on the tranny
> shifter is not the correct one:
> http://jeepadventures.dyndns.org/jeep/dayone/07.jpg
>
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >travis wrote:
> >>
> >> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
> >> shared the following:
> >>
> >> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
> >> >and you're making me feel all frustrated!
> >> >
> >> >What else did you order??? Can I see? ;-)
> >> >
> >> >--
> >> >Jim
> >>
> >> Only this: :-)
> >> http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
> >>
> >> --
> >> Travis
> >> http://jeepadventures.dyndns.org/jeep.html
> >> The meek shall inherit the earth. After I'm finished with it.
> >> :wq!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
#106
Guest
Posts: n/a
Re: Good use for scrap metal
Ok, you have something strange.....
My CJ7 is a mirror image of that! I just went and looked....
Mike
travis wrote:
>
> On Wed, 22 Oct 2003 17:20:39 -0400, Mike Romain
> <romainm@sympatico.ca> shared the following:
>
> >That sure wouldn't fit my CJ7!
> >
> >That is a YJ plate!
>
> It looks exactly like the plate I have in my CJ-5 now and it at least
> says: Jeep CJ5 CJ7 CJ8 Shifter plate and boot
> Here's what's currently in my CJ-5. I realize the boot on the tranny
> shifter is not the correct one:
> http://jeepadventures.dyndns.org/jeep/dayone/07.jpg
>
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >travis wrote:
> >>
> >> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
> >> shared the following:
> >>
> >> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
> >> >and you're making me feel all frustrated!
> >> >
> >> >What else did you order??? Can I see? ;-)
> >> >
> >> >--
> >> >Jim
> >>
> >> Only this: :-)
> >> http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
> >>
> >> --
> >> Travis
> >> http://jeepadventures.dyndns.org/jeep.html
> >> The meek shall inherit the earth. After I'm finished with it.
> >> :wq!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
My CJ7 is a mirror image of that! I just went and looked....
Mike
travis wrote:
>
> On Wed, 22 Oct 2003 17:20:39 -0400, Mike Romain
> <romainm@sympatico.ca> shared the following:
>
> >That sure wouldn't fit my CJ7!
> >
> >That is a YJ plate!
>
> It looks exactly like the plate I have in my CJ-5 now and it at least
> says: Jeep CJ5 CJ7 CJ8 Shifter plate and boot
> Here's what's currently in my CJ-5. I realize the boot on the tranny
> shifter is not the correct one:
> http://jeepadventures.dyndns.org/jeep/dayone/07.jpg
>
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >travis wrote:
> >>
> >> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
> >> shared the following:
> >>
> >> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
> >> >and you're making me feel all frustrated!
> >> >
> >> >What else did you order??? Can I see? ;-)
> >> >
> >> >--
> >> >Jim
> >>
> >> Only this: :-)
> >> http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
> >>
> >> --
> >> Travis
> >> http://jeepadventures.dyndns.org/jeep.html
> >> The meek shall inherit the earth. After I'm finished with it.
> >> :wq!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
#107
Guest
Posts: n/a
Re: Good use for scrap metal
On Wed, 22 Oct 2003 17:53:06 -0400, Mike Romain
<romainm@sympatico.ca> shared the following:
>It is a mirror image of the one in the link, like I said, it is a YJ
>one.
>
>Mike
Odd. Oh well, it fits my CJ ok except for the funky boot I have on my
xfer case shifter right now. Maybe I can make it work for me by using
the boot included. If not I guess I'll sell it on ebay and look some
more. I wonder why the item is listed as one for cj5, cj7, cj8. Do
you have a picture of what the plate and boots are supposed to look
like? Thank you.
>
>travis wrote:
>>
>> On Wed, 22 Oct 2003 17:20:39 -0400, Mike Romain
>> <romainm@sympatico.ca> shared the following:
>>
>> >That sure wouldn't fit my CJ7!
>> >
>> >That is a YJ plate!
>>
>> It looks exactly like the plate I have in my CJ-5 now and it at least
>> says: Jeep CJ5 CJ7 CJ8 Shifter plate and boot
>> Here's what's currently in my CJ-5. I realize the boot on the tranny
>> shifter is not the correct one:
>> http://jeepadventures.dyndns.org/jeep/dayone/07.jpg
>>
>> >
>> >Mike
>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> >88 Cherokee 235 BFG AT's
>> >
>> >travis wrote:
>> >>
>> >> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
>> >> shared the following:
>> >>
>> >> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
>> >> >and you're making me feel all frustrated!
>> >> >
>> >> >What else did you order??? Can I see? ;-)
>> >> >
>> >> >--
>> >> >Jim
>> >>
>> >> Only this: :-)
>> >> http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
>> >>
>> >> --
>> >> Travis
>> >> http://jeepadventures.dyndns.org/jeep.html
>> >> The meek shall inherit the earth. After I'm finished with it.
>> >> :wq!
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<romainm@sympatico.ca> shared the following:
>It is a mirror image of the one in the link, like I said, it is a YJ
>one.
>
>Mike
Odd. Oh well, it fits my CJ ok except for the funky boot I have on my
xfer case shifter right now. Maybe I can make it work for me by using
the boot included. If not I guess I'll sell it on ebay and look some
more. I wonder why the item is listed as one for cj5, cj7, cj8. Do
you have a picture of what the plate and boots are supposed to look
like? Thank you.
>
>travis wrote:
>>
>> On Wed, 22 Oct 2003 17:20:39 -0400, Mike Romain
>> <romainm@sympatico.ca> shared the following:
>>
>> >That sure wouldn't fit my CJ7!
>> >
>> >That is a YJ plate!
>>
>> It looks exactly like the plate I have in my CJ-5 now and it at least
>> says: Jeep CJ5 CJ7 CJ8 Shifter plate and boot
>> Here's what's currently in my CJ-5. I realize the boot on the tranny
>> shifter is not the correct one:
>> http://jeepadventures.dyndns.org/jeep/dayone/07.jpg
>>
>> >
>> >Mike
>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> >88 Cherokee 235 BFG AT's
>> >
>> >travis wrote:
>> >>
>> >> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
>> >> shared the following:
>> >>
>> >> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
>> >> >and you're making me feel all frustrated!
>> >> >
>> >> >What else did you order??? Can I see? ;-)
>> >> >
>> >> >--
>> >> >Jim
>> >>
>> >> Only this: :-)
>> >> http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
>> >>
>> >> --
>> >> Travis
>> >> http://jeepadventures.dyndns.org/jeep.html
>> >> The meek shall inherit the earth. After I'm finished with it.
>> >> :wq!
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#108
Guest
Posts: n/a
Re: Good use for scrap metal
On Wed, 22 Oct 2003 17:53:06 -0400, Mike Romain
<romainm@sympatico.ca> shared the following:
>It is a mirror image of the one in the link, like I said, it is a YJ
>one.
>
>Mike
Odd. Oh well, it fits my CJ ok except for the funky boot I have on my
xfer case shifter right now. Maybe I can make it work for me by using
the boot included. If not I guess I'll sell it on ebay and look some
more. I wonder why the item is listed as one for cj5, cj7, cj8. Do
you have a picture of what the plate and boots are supposed to look
like? Thank you.
>
>travis wrote:
>>
>> On Wed, 22 Oct 2003 17:20:39 -0400, Mike Romain
>> <romainm@sympatico.ca> shared the following:
>>
>> >That sure wouldn't fit my CJ7!
>> >
>> >That is a YJ plate!
>>
>> It looks exactly like the plate I have in my CJ-5 now and it at least
>> says: Jeep CJ5 CJ7 CJ8 Shifter plate and boot
>> Here's what's currently in my CJ-5. I realize the boot on the tranny
>> shifter is not the correct one:
>> http://jeepadventures.dyndns.org/jeep/dayone/07.jpg
>>
>> >
>> >Mike
>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> >88 Cherokee 235 BFG AT's
>> >
>> >travis wrote:
>> >>
>> >> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
>> >> shared the following:
>> >>
>> >> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
>> >> >and you're making me feel all frustrated!
>> >> >
>> >> >What else did you order??? Can I see? ;-)
>> >> >
>> >> >--
>> >> >Jim
>> >>
>> >> Only this: :-)
>> >> http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
>> >>
>> >> --
>> >> Travis
>> >> http://jeepadventures.dyndns.org/jeep.html
>> >> The meek shall inherit the earth. After I'm finished with it.
>> >> :wq!
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<romainm@sympatico.ca> shared the following:
>It is a mirror image of the one in the link, like I said, it is a YJ
>one.
>
>Mike
Odd. Oh well, it fits my CJ ok except for the funky boot I have on my
xfer case shifter right now. Maybe I can make it work for me by using
the boot included. If not I guess I'll sell it on ebay and look some
more. I wonder why the item is listed as one for cj5, cj7, cj8. Do
you have a picture of what the plate and boots are supposed to look
like? Thank you.
>
>travis wrote:
>>
>> On Wed, 22 Oct 2003 17:20:39 -0400, Mike Romain
>> <romainm@sympatico.ca> shared the following:
>>
>> >That sure wouldn't fit my CJ7!
>> >
>> >That is a YJ plate!
>>
>> It looks exactly like the plate I have in my CJ-5 now and it at least
>> says: Jeep CJ5 CJ7 CJ8 Shifter plate and boot
>> Here's what's currently in my CJ-5. I realize the boot on the tranny
>> shifter is not the correct one:
>> http://jeepadventures.dyndns.org/jeep/dayone/07.jpg
>>
>> >
>> >Mike
>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> >88 Cherokee 235 BFG AT's
>> >
>> >travis wrote:
>> >>
>> >> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
>> >> shared the following:
>> >>
>> >> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
>> >> >and you're making me feel all frustrated!
>> >> >
>> >> >What else did you order??? Can I see? ;-)
>> >> >
>> >> >--
>> >> >Jim
>> >>
>> >> Only this: :-)
>> >> http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
>> >>
>> >> --
>> >> Travis
>> >> http://jeepadventures.dyndns.org/jeep.html
>> >> The meek shall inherit the earth. After I'm finished with it.
>> >> :wq!
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#109
Guest
Posts: n/a
Re: Good use for scrap metal
On Wed, 22 Oct 2003 17:53:06 -0400, Mike Romain
<romainm@sympatico.ca> shared the following:
>It is a mirror image of the one in the link, like I said, it is a YJ
>one.
>
>Mike
Odd. Oh well, it fits my CJ ok except for the funky boot I have on my
xfer case shifter right now. Maybe I can make it work for me by using
the boot included. If not I guess I'll sell it on ebay and look some
more. I wonder why the item is listed as one for cj5, cj7, cj8. Do
you have a picture of what the plate and boots are supposed to look
like? Thank you.
>
>travis wrote:
>>
>> On Wed, 22 Oct 2003 17:20:39 -0400, Mike Romain
>> <romainm@sympatico.ca> shared the following:
>>
>> >That sure wouldn't fit my CJ7!
>> >
>> >That is a YJ plate!
>>
>> It looks exactly like the plate I have in my CJ-5 now and it at least
>> says: Jeep CJ5 CJ7 CJ8 Shifter plate and boot
>> Here's what's currently in my CJ-5. I realize the boot on the tranny
>> shifter is not the correct one:
>> http://jeepadventures.dyndns.org/jeep/dayone/07.jpg
>>
>> >
>> >Mike
>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> >88 Cherokee 235 BFG AT's
>> >
>> >travis wrote:
>> >>
>> >> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
>> >> shared the following:
>> >>
>> >> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
>> >> >and you're making me feel all frustrated!
>> >> >
>> >> >What else did you order??? Can I see? ;-)
>> >> >
>> >> >--
>> >> >Jim
>> >>
>> >> Only this: :-)
>> >> http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
>> >>
>> >> --
>> >> Travis
>> >> http://jeepadventures.dyndns.org/jeep.html
>> >> The meek shall inherit the earth. After I'm finished with it.
>> >> :wq!
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<romainm@sympatico.ca> shared the following:
>It is a mirror image of the one in the link, like I said, it is a YJ
>one.
>
>Mike
Odd. Oh well, it fits my CJ ok except for the funky boot I have on my
xfer case shifter right now. Maybe I can make it work for me by using
the boot included. If not I guess I'll sell it on ebay and look some
more. I wonder why the item is listed as one for cj5, cj7, cj8. Do
you have a picture of what the plate and boots are supposed to look
like? Thank you.
>
>travis wrote:
>>
>> On Wed, 22 Oct 2003 17:20:39 -0400, Mike Romain
>> <romainm@sympatico.ca> shared the following:
>>
>> >That sure wouldn't fit my CJ7!
>> >
>> >That is a YJ plate!
>>
>> It looks exactly like the plate I have in my CJ-5 now and it at least
>> says: Jeep CJ5 CJ7 CJ8 Shifter plate and boot
>> Here's what's currently in my CJ-5. I realize the boot on the tranny
>> shifter is not the correct one:
>> http://jeepadventures.dyndns.org/jeep/dayone/07.jpg
>>
>> >
>> >Mike
>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> >88 Cherokee 235 BFG AT's
>> >
>> >travis wrote:
>> >>
>> >> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
>> >> shared the following:
>> >>
>> >> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
>> >> >and you're making me feel all frustrated!
>> >> >
>> >> >What else did you order??? Can I see? ;-)
>> >> >
>> >> >--
>> >> >Jim
>> >>
>> >> Only this: :-)
>> >> http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
>> >>
>> >> --
>> >> Travis
>> >> http://jeepadventures.dyndns.org/jeep.html
>> >> The meek shall inherit the earth. After I'm finished with it.
>> >> :wq!
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#110
Guest
Posts: n/a
Re: Good use for scrap metal
In article <20031022175812.29815.00001294@mb-m21.aol.com>,
mlmacchia@aol.comspambgon (Matt Macchiarolo) writes:
>Ages 8, 4, and 2. Oldest and youngest are boys, the youngest is the worst
>offender when it comes to trashing carpet. :-)
http://www.geocities.com/basscraft.geo/kids.jpg
http://www.geocities.com/basscraft.g...ssionpoint.jpg
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
mlmacchia@aol.comspambgon (Matt Macchiarolo) writes:
>Ages 8, 4, and 2. Oldest and youngest are boys, the youngest is the worst
>offender when it comes to trashing carpet. :-)
http://www.geocities.com/basscraft.geo/kids.jpg
http://www.geocities.com/basscraft.g...ssionpoint.jpg
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html