Re: good thing to clean out engine
 

The problem I had, as I'm sure you do too, is that the elbows will
accept a different size hose than the attachments at the throttle
body/manifold. I just used a bigger hose to couple with the elbow and
used then clamped the other end down tight.
I'll take a picture in a little bit to show you exactly how mine is set up.

abomb69 wrote:
> The idiot at autozone sold me 7/8 heater hose and said that should cover it.
>
> Yes, I do at least have the elbows still...
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:erjf2j$vlr$1@aioe.org...
>> Just wondering, since you don't have the hoses, do you just have empty
>> holes in the top of your valve cover? Or are the elbows still there, just
>> with no hose attached?
>>
>
>

Re: good thing to clean out engine
 

The problem I had, as I'm sure you do too, is that the elbows will
accept a different size hose than the attachments at the throttle
body/manifold. I just used a bigger hose to couple with the elbow and
used then clamped the other end down tight.
I'll take a picture in a little bit to show you exactly how mine is set up.

abomb69 wrote:
> The idiot at autozone sold me 7/8 heater hose and said that should cover it.
>
> Yes, I do at least have the elbows still...
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:erjf2j$vlr$1@aioe.org...
>> Just wondering, since you don't have the hoses, do you just have empty
>> holes in the top of your valve cover? Or are the elbows still there, just
>> with no hose attached?
>>
>
>

Re: good thing to clean out engine
 

The problem I had, as I'm sure you do too, is that the elbows will
accept a different size hose than the attachments at the throttle
body/manifold. I just used a bigger hose to couple with the elbow and
used then clamped the other end down tight.
I'll take a picture in a little bit to show you exactly how mine is set up.

abomb69 wrote:
> The idiot at autozone sold me 7/8 heater hose and said that should cover it.
>
> Yes, I do at least have the elbows still...
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:erjf2j$vlr$1@aioe.org...
>> Just wondering, since you don't have the hoses, do you just have empty
>> holes in the top of your valve cover? Or are the elbows still there, just
>> with no hose attached?
>>
>
>

Re: good thing to clean out engine
 

Ok, some pictures of what I meant:
http://s143.photobucket.com/albums/r...t=IMG_0361.jpg
I would have gotten a closer shot, but it was dark and I could barely
see what I was snapping.

The Merg wrote:
> The problem I had, as I'm sure you do too, is that the elbows will
> accept a different size hose than the attachments at the throttle
> body/manifold. I just used a bigger hose to couple with the elbow and
> used then clamped the other end down tight.
> I'll take a picture in a little bit to show you exactly how mine is set up.
>
> abomb69 wrote:
>> The idiot at autozone sold me 7/8 heater hose and said that should
>> cover it.
>>
>> Yes, I do at least have the elbows still...
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:erjf2j$vlr$1@aioe.org...
>>> Just wondering, since you don't have the hoses, do you just have
>>> empty holes in the top of your valve cover? Or are the elbows still
>>> there, just with no hose attached?
>>>
>>
>>

Re: good thing to clean out engine
 

Ok, some pictures of what I meant:
http://s143.photobucket.com/albums/r...t=IMG_0361.jpg
I would have gotten a closer shot, but it was dark and I could barely
see what I was snapping.

The Merg wrote:
> The problem I had, as I'm sure you do too, is that the elbows will
> accept a different size hose than the attachments at the throttle
> body/manifold. I just used a bigger hose to couple with the elbow and
> used then clamped the other end down tight.
> I'll take a picture in a little bit to show you exactly how mine is set up.
>
> abomb69 wrote:
>> The idiot at autozone sold me 7/8 heater hose and said that should
>> cover it.
>>
>> Yes, I do at least have the elbows still...
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:erjf2j$vlr$1@aioe.org...
>>> Just wondering, since you don't have the hoses, do you just have
>>> empty holes in the top of your valve cover? Or are the elbows still
>>> there, just with no hose attached?
>>>
>>
>>

Re: good thing to clean out engine
 

Ok, some pictures of what I meant:
http://s143.photobucket.com/albums/r...t=IMG_0361.jpg
I would have gotten a closer shot, but it was dark and I could barely
see what I was snapping.

The Merg wrote:
> The problem I had, as I'm sure you do too, is that the elbows will
> accept a different size hose than the attachments at the throttle
> body/manifold. I just used a bigger hose to couple with the elbow and
> used then clamped the other end down tight.
> I'll take a picture in a little bit to show you exactly how mine is set up.
>
> abomb69 wrote:
>> The idiot at autozone sold me 7/8 heater hose and said that should
>> cover it.
>>
>> Yes, I do at least have the elbows still...
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:erjf2j$vlr$1@aioe.org...
>>> Just wondering, since you don't have the hoses, do you just have
>>> empty holes in the top of your valve cover? Or are the elbows still
>>> there, just with no hose attached?
>>>
>>
>>