Joe wrote:

> It it disolves RTV what does it do to your skin or a latex glove (I'm
> serious, how do you apply it safely)?
>
> "Bob Casanova" <nospam@buzz.off> wrote in message
> news:4bnssv8tqqnvnijghudjkg0vlkbb5b1i1a@4ax.com...
>
>>On Wed, 03 Dec 2003 16:27:06 GMT, the following appeared in
>>rec.autos.makers.jeep+******, posted by "c" <c@me.org>:
>>
>>
>>>
>>>"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in
>
> message
>
>>>news:bql1ve$233nvl$1@ID-147790.news.uni-berlin.de...
>>>
>>>>"c" <c@me.org> wrote in message
>>>>news:Mxnzb.102854$Eq1.17673@twister.rdc-kc.rr.com...
>>>>
>>>>>"Gary" <tytewad@comcast.net> wrote in message
>>>>>news:bac0c013.0312030600.81881f1@posting.goog le.com...
>>>>>
>>>>>>I always dread removing old water pump gaskets, etc. I like to do
>>>>>>a good job and it usually takes much longer than I expect. I
>
> usually
>
>>>>>>use a putty knife or razor knife. Does anyone have any tricks for
>>>>>>easy gasket removal? Thanks in advance.
>>>>>
>>>>>NAPA's gasket remover spray works great.There are others who sell
>>>>>this as well. Basically spray it on, give it a few minutes, and wipe
>
> off
>
>>>>>the gasket residue with a rag.
>>>>>
>>>>
>>>>Here's a tip. This stuff is probably the same as paint remover.
>>>>
>>>>Earle
>>>>
>>>>
>>>
>>>It could me, but it definitely has a different smell to it than paint
>>>stripper. The stuff even removes the fiber head gasket material that
>
> bakes
>
>>>on so bad. If I recall, a spray can of the stuff was less than $5, so it
>>>might be a good investment..
>>
>>I don't know how well the others work, but Permatex Gasket
>>Remover works great; it even dissolves RTV.
>>


That and a mini-wire wheel on a Dremel (battery powered or otherwise;
they now have a super-duty cordless one) oughtta do the trick.


>

 

On Wed, 3 Dec 2003 17:08:23 -0500, the following appeared in
rec.autos.makers.jeep+******, posted by "Joe"
<me@privacy.net (jo_ratner@yahoo.com)>:

You *don't* want to get it on you if you can help it. From
the label, it contains methylene chloride (*really* bad for
you), xylene (ditto), isopropanol and the usual petroleum
distillates. But equal caveats apply to just about any
industrial-grade solvents: Use only in a well-ventilated
area and use good-quality neoprene or butyl rubber gloves;
expensive, but durable and well worth the cost. Carburetor
cleaner was at least as bad, and many commercial paint
strippers are worse.

>It it disolves RTV what does it do to your skin or a latex glove (I'm
>serious, how do you apply it safely)?
>
>"Bob Casanova" <nospam@buzz.off> wrote in message
>news:4bnssv8tqqnvnijghudjkg0vlkbb5b1i1a@4ax.com.. .
>> On Wed, 03 Dec 2003 16:27:06 GMT, the following appeared in
>> rec.autos.makers.jeep+******, posted by "c" <c@me.org>:
>>
>> >
>> >
>> >"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in
>message
>> >news:bql1ve$233nvl$1@ID-147790.news.uni-berlin.de...
>> >> "c" <c@me.org> wrote in message
>> >> news:Mxnzb.102854$Eq1.17673@twister.rdc-kc.rr.com...
>> >> >
>> >> > "Gary" <tytewad@comcast.net> wrote in message
>> >> > news:bac0c013.0312030600.81881f1@posting.google.co m...
>> >> > > I always dread removing old water pump gaskets, etc. I like to do
>> >> > > a good job and it usually takes much longer than I expect. I
>usually
>> >> > > use a putty knife or razor knife. Does anyone have any tricks for
>> >> > > easy gasket removal? Thanks in advance.
>> >> >
>> >> > NAPA's gasket remover spray works great.There are others who sell
>> >> > this as well. Basically spray it on, give it a few minutes, and wipe
>off
>> >> > the gasket residue with a rag.
>> >> >
>> >> Here's a tip. This stuff is probably the same as paint remover.
>> >>
>> >> Earle
>> >>
>> >>
>> >
>> >It could me, but it definitely has a different smell to it than paint
>> >stripper. The stuff even removes the fiber head gasket material that
>bakes
>> >on so bad. If I recall, a spray can of the stuff was less than $5, so it
>> >might be a good investment..
>>
>> I don't know how well the others work, but Permatex Gasket
>> Remover works great; it even dissolves RTV.
>>
>> --
>>
>> Bob C.
>>
>> Reply to Bob-Casanova @ worldnet.att.net
>> (without the spaces, of course)
>>
>> "The most exciting phrase to hear in science,
>> the one that heralds new discoveries, is not
>> 'Eureka!' but 'That's funny...'"
>> - Isaac Asimov
>

--

Bob C.

Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)

"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov

 

On Wed, 3 Dec 2003 17:08:23 -0500, the following appeared in
rec.autos.makers.jeep+******, posted by "Joe"
<me@privacy.net (jo_ratner@yahoo.com)>:

You *don't* want to get it on you if you can help it. From
the label, it contains methylene chloride (*really* bad for
you), xylene (ditto), isopropanol and the usual petroleum
distillates. But equal caveats apply to just about any
industrial-grade solvents: Use only in a well-ventilated
area and use good-quality neoprene or butyl rubber gloves;
expensive, but durable and well worth the cost. Carburetor
cleaner was at least as bad, and many commercial paint
strippers are worse.

>It it disolves RTV what does it do to your skin or a latex glove (I'm
>serious, how do you apply it safely)?
>
>"Bob Casanova" <nospam@buzz.off> wrote in message
>news:4bnssv8tqqnvnijghudjkg0vlkbb5b1i1a@4ax.com.. .
>> On Wed, 03 Dec 2003 16:27:06 GMT, the following appeared in
>> rec.autos.makers.jeep+******, posted by "c" <c@me.org>:
>>
>> >
>> >
>> >"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in
>message
>> >news:bql1ve$233nvl$1@ID-147790.news.uni-berlin.de...
>> >> "c" <c@me.org> wrote in message
>> >> news:Mxnzb.102854$Eq1.17673@twister.rdc-kc.rr.com...
>> >> >
>> >> > "Gary" <tytewad@comcast.net> wrote in message
>> >> > news:bac0c013.0312030600.81881f1@posting.google.co m...
>> >> > > I always dread removing old water pump gaskets, etc. I like to do
>> >> > > a good job and it usually takes much longer than I expect. I
>usually
>> >> > > use a putty knife or razor knife. Does anyone have any tricks for
>> >> > > easy gasket removal? Thanks in advance.
>> >> >
>> >> > NAPA's gasket remover spray works great.There are others who sell
>> >> > this as well. Basically spray it on, give it a few minutes, and wipe
>off
>> >> > the gasket residue with a rag.
>> >> >
>> >> Here's a tip. This stuff is probably the same as paint remover.
>> >>
>> >> Earle
>> >>
>> >>
>> >
>> >It could me, but it definitely has a different smell to it than paint
>> >stripper. The stuff even removes the fiber head gasket material that
>bakes
>> >on so bad. If I recall, a spray can of the stuff was less than $5, so it
>> >might be a good investment..
>>
>> I don't know how well the others work, but Permatex Gasket
>> Remover works great; it even dissolves RTV.
>>
>> --
>>
>> Bob C.
>>
>> Reply to Bob-Casanova @ worldnet.att.net
>> (without the spaces, of course)
>>
>> "The most exciting phrase to hear in science,
>> the one that heralds new discoveries, is not
>> 'Eureka!' but 'That's funny...'"
>> - Isaac Asimov
>

--

Bob C.

Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)

"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov

 

On Wed, 3 Dec 2003 17:08:23 -0500, the following appeared in
rec.autos.makers.jeep+******, posted by "Joe"
<me@privacy.net (jo_ratner@yahoo.com)>:

You *don't* want to get it on you if you can help it. From
the label, it contains methylene chloride (*really* bad for
you), xylene (ditto), isopropanol and the usual petroleum
distillates. But equal caveats apply to just about any
industrial-grade solvents: Use only in a well-ventilated
area and use good-quality neoprene or butyl rubber gloves;
expensive, but durable and well worth the cost. Carburetor
cleaner was at least as bad, and many commercial paint
strippers are worse.

>It it disolves RTV what does it do to your skin or a latex glove (I'm
>serious, how do you apply it safely)?
>
>"Bob Casanova" <nospam@buzz.off> wrote in message
>news:4bnssv8tqqnvnijghudjkg0vlkbb5b1i1a@4ax.com.. .
>> On Wed, 03 Dec 2003 16:27:06 GMT, the following appeared in
>> rec.autos.makers.jeep+******, posted by "c" <c@me.org>:
>>
>> >
>> >
>> >"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in
>message
>> >news:bql1ve$233nvl$1@ID-147790.news.uni-berlin.de...
>> >> "c" <c@me.org> wrote in message
>> >> news:Mxnzb.102854$Eq1.17673@twister.rdc-kc.rr.com...
>> >> >
>> >> > "Gary" <tytewad@comcast.net> wrote in message
>> >> > news:bac0c013.0312030600.81881f1@posting.google.co m...
>> >> > > I always dread removing old water pump gaskets, etc. I like to do
>> >> > > a good job and it usually takes much longer than I expect. I
>usually
>> >> > > use a putty knife or razor knife. Does anyone have any tricks for
>> >> > > easy gasket removal? Thanks in advance.
>> >> >
>> >> > NAPA's gasket remover spray works great.There are others who sell
>> >> > this as well. Basically spray it on, give it a few minutes, and wipe
>off
>> >> > the gasket residue with a rag.
>> >> >
>> >> Here's a tip. This stuff is probably the same as paint remover.
>> >>
>> >> Earle
>> >>
>> >>
>> >
>> >It could me, but it definitely has a different smell to it than paint
>> >stripper. The stuff even removes the fiber head gasket material that
>bakes
>> >on so bad. If I recall, a spray can of the stuff was less than $5, so it
>> >might be a good investment..
>>
>> I don't know how well the others work, but Permatex Gasket
>> Remover works great; it even dissolves RTV.
>>
>> --
>>
>> Bob C.
>>
>> Reply to Bob-Casanova @ worldnet.att.net
>> (without the spaces, of course)
>>
>> "The most exciting phrase to hear in science,
>> the one that heralds new discoveries, is not
>> 'Eureka!' but 'That's funny...'"
>> - Isaac Asimov
>

--

Bob C.

Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)

"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov