L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

I would guree it's an aerosol. It's chemical makeup:
http://www.camd.lsu.edu/msds/p/perma...et_remover.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Joe wrote:
>
> It it disolves RTV what does it do to your skin or a latex glove (I'm
> serious, how do you apply it safely)?

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

I would guree it's an aerosol. It's chemical makeup:
http://www.camd.lsu.edu/msds/p/perma...et_remover.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Joe wrote:
>
> It it disolves RTV what does it do to your skin or a latex glove (I'm
> serious, how do you apply it safely)?

c

It is an aerosol. Nitrile gloves will protect your hands. These are
available in any paint store as they are the same gloves used with paint
stripper. The stuff does burn if you get it on your skin, so definitely wear
the gloves.

Chris

"Joe" <me@privacy.net (jo_ratner@yahoo.com)> wrote in message
news:bqlmsn$23ui93$1@ID-207166.news.uni-berlin.de...
> It it disolves RTV what does it do to your skin or a latex glove (I'm
> serious, how do you apply it safely)?
>
> "Bob Casanova" <nospam@buzz.off> wrote in message
> news:4bnssv8tqqnvnijghudjkg0vlkbb5b1i1a@4ax.com...
> > On Wed, 03 Dec 2003 16:27:06 GMT, the following appeared in
> > rec.autos.makers.jeep+******, posted by "c" <c@me.org>:
> >
> > >
> > >
> > >"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in
> message
> > >news:bql1ve$233nvl$1@ID-147790.news.uni-berlin.de...
> > >> "c" <c@me.org> wrote in message
> > >> news:Mxnzb.102854$Eq1.17673@twister.rdc-kc.rr.com...
> > >> >
> > >> > "Gary" <tytewad@comcast.net> wrote in message
> > >> > news:bac0c013.0312030600.81881f1@posting.google.co m...
> > >> > > I always dread removing old water pump gaskets, etc. I like to do
> > >> > > a good job and it usually takes much longer than I expect. I
> usually
> > >> > > use a putty knife or razor knife. Does anyone have any tricks for
> > >> > > easy gasket removal? Thanks in advance.
> > >> >
> > >> > NAPA's gasket remover spray works great.There are others who sell
> > >> > this as well. Basically spray it on, give it a few minutes, and
wipe
> off
> > >> > the gasket residue with a rag.
> > >> >
> > >> Here's a tip. This stuff is probably the same as paint remover.
> > >>
> > >> Earle
> > >>
> > >>
> > >
> > >It could me, but it definitely has a different smell to it than paint
> > >stripper. The stuff even removes the fiber head gasket material that
> bakes
> > >on so bad. If I recall, a spray can of the stuff was less than $5, so
it
> > >might be a good investment..
> >
> > I don't know how well the others work, but Permatex Gasket
> > Remover works great; it even dissolves RTV.
> >
> > --
> >
> > Bob C.
> >
> > Reply to Bob-Casanova @ worldnet.att.net
> > (without the spaces, of course)
> >
> > "The most exciting phrase to hear in science,
> > the one that heralds new discoveries, is not
> > 'Eureka!' but 'That's funny...'"
> > - Isaac Asimov
>
>

c

It is an aerosol. Nitrile gloves will protect your hands. These are
available in any paint store as they are the same gloves used with paint
stripper. The stuff does burn if you get it on your skin, so definitely wear
the gloves.

Chris

"Joe" <me@privacy.net (jo_ratner@yahoo.com)> wrote in message
news:bqlmsn$23ui93$1@ID-207166.news.uni-berlin.de...
> It it disolves RTV what does it do to your skin or a latex glove (I'm
> serious, how do you apply it safely)?
>
> "Bob Casanova" <nospam@buzz.off> wrote in message
> news:4bnssv8tqqnvnijghudjkg0vlkbb5b1i1a@4ax.com...
> > On Wed, 03 Dec 2003 16:27:06 GMT, the following appeared in
> > rec.autos.makers.jeep+******, posted by "c" <c@me.org>:
> >
> > >
> > >
> > >"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in
> message
> > >news:bql1ve$233nvl$1@ID-147790.news.uni-berlin.de...
> > >> "c" <c@me.org> wrote in message
> > >> news:Mxnzb.102854$Eq1.17673@twister.rdc-kc.rr.com...
> > >> >
> > >> > "Gary" <tytewad@comcast.net> wrote in message
> > >> > news:bac0c013.0312030600.81881f1@posting.google.co m...
> > >> > > I always dread removing old water pump gaskets, etc. I like to do
> > >> > > a good job and it usually takes much longer than I expect. I
> usually
> > >> > > use a putty knife or razor knife. Does anyone have any tricks for
> > >> > > easy gasket removal? Thanks in advance.
> > >> >
> > >> > NAPA's gasket remover spray works great.There are others who sell
> > >> > this as well. Basically spray it on, give it a few minutes, and
wipe
> off
> > >> > the gasket residue with a rag.
> > >> >
> > >> Here's a tip. This stuff is probably the same as paint remover.
> > >>
> > >> Earle
> > >>
> > >>
> > >
> > >It could me, but it definitely has a different smell to it than paint
> > >stripper. The stuff even removes the fiber head gasket material that
> bakes
> > >on so bad. If I recall, a spray can of the stuff was less than $5, so
it
> > >might be a good investment..
> >
> > I don't know how well the others work, but Permatex Gasket
> > Remover works great; it even dissolves RTV.
> >
> > --
> >
> > Bob C.
> >
> > Reply to Bob-Casanova @ worldnet.att.net
> > (without the spaces, of course)
> >
> > "The most exciting phrase to hear in science,
> > the one that heralds new discoveries, is not
> > 'Eureka!' but 'That's funny...'"
> > - Isaac Asimov
>
>

c

It is an aerosol. Nitrile gloves will protect your hands. These are
available in any paint store as they are the same gloves used with paint
stripper. The stuff does burn if you get it on your skin, so definitely wear
the gloves.

Chris

"Joe" <me@privacy.net (jo_ratner@yahoo.com)> wrote in message
news:bqlmsn$23ui93$1@ID-207166.news.uni-berlin.de...
> It it disolves RTV what does it do to your skin or a latex glove (I'm
> serious, how do you apply it safely)?
>
> "Bob Casanova" <nospam@buzz.off> wrote in message
> news:4bnssv8tqqnvnijghudjkg0vlkbb5b1i1a@4ax.com...
> > On Wed, 03 Dec 2003 16:27:06 GMT, the following appeared in
> > rec.autos.makers.jeep+******, posted by "c" <c@me.org>:
> >
> > >
> > >
> > >"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in
> message
> > >news:bql1ve$233nvl$1@ID-147790.news.uni-berlin.de...
> > >> "c" <c@me.org> wrote in message
> > >> news:Mxnzb.102854$Eq1.17673@twister.rdc-kc.rr.com...
> > >> >
> > >> > "Gary" <tytewad@comcast.net> wrote in message
> > >> > news:bac0c013.0312030600.81881f1@posting.google.co m...
> > >> > > I always dread removing old water pump gaskets, etc. I like to do
> > >> > > a good job and it usually takes much longer than I expect. I
> usually
> > >> > > use a putty knife or razor knife. Does anyone have any tricks for
> > >> > > easy gasket removal? Thanks in advance.
> > >> >
> > >> > NAPA's gasket remover spray works great.There are others who sell
> > >> > this as well. Basically spray it on, give it a few minutes, and
wipe
> off
> > >> > the gasket residue with a rag.
> > >> >
> > >> Here's a tip. This stuff is probably the same as paint remover.
> > >>
> > >> Earle
> > >>
> > >>
> > >
> > >It could me, but it definitely has a different smell to it than paint
> > >stripper. The stuff even removes the fiber head gasket material that
> bakes
> > >on so bad. If I recall, a spray can of the stuff was less than $5, so
it
> > >might be a good investment..
> >
> > I don't know how well the others work, but Permatex Gasket
> > Remover works great; it even dissolves RTV.
> >
> > --
> >
> > Bob C.
> >
> > Reply to Bob-Casanova @ worldnet.att.net
> > (without the spaces, of course)
> >
> > "The most exciting phrase to hear in science,
> > the one that heralds new discoveries, is not
> > 'Eureka!' but 'That's funny...'"
> > - Isaac Asimov
>
>

DougW

c did pass the time by typing:
> It is an aerosol. Nitrile gloves will protect your hands. These are
> available in any paint store as they are the same gloves used with paint
> stripper. The stuff does burn if you get it on your skin, so definitely wear
> the gloves.

That sounds like contact cleaner, or Acetic Acid with Hexane polymers and Isopropanol.
(I miss 1-1-1 Trichloroethylene)

Standard contact cleaner works, but it's hell on paint and skin.

I prefer to use my brass scrapers and brush with a tiny bit of WD-40.

--
DougW

DougW

c did pass the time by typing:
> It is an aerosol. Nitrile gloves will protect your hands. These are
> available in any paint store as they are the same gloves used with paint
> stripper. The stuff does burn if you get it on your skin, so definitely wear
> the gloves.

That sounds like contact cleaner, or Acetic Acid with Hexane polymers and Isopropanol.
(I miss 1-1-1 Trichloroethylene)

Standard contact cleaner works, but it's hell on paint and skin.

I prefer to use my brass scrapers and brush with a tiny bit of WD-40.

--
DougW

DougW

c did pass the time by typing:
> It is an aerosol. Nitrile gloves will protect your hands. These are
> available in any paint store as they are the same gloves used with paint
> stripper. The stuff does burn if you get it on your skin, so definitely wear
> the gloves.

That sounds like contact cleaner, or Acetic Acid with Hexane polymers and Isopropanol.
(I miss 1-1-1 Trichloroethylene)

Standard contact cleaner works, but it's hell on paint and skin.

I prefer to use my brass scrapers and brush with a tiny bit of WD-40.

--
DougW

Cal Wheeler

Joe wrote:

> It it disolves RTV what does it do to your skin or a latex glove (I'm
> serious, how do you apply it safely)?
>
> "Bob Casanova" <nospam@buzz.off> wrote in message
> news:4bnssv8tqqnvnijghudjkg0vlkbb5b1i1a@4ax.com...
>
>>On Wed, 03 Dec 2003 16:27:06 GMT, the following appeared in
>>rec.autos.makers.jeep+******, posted by "c" <c@me.org>:
>>
>>
>>>
>>>"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in
>
> message
>
>>>news:bql1ve$233nvl$1@ID-147790.news.uni-berlin.de...
>>>
>>>>"c" <c@me.org> wrote in message
>>>>news:Mxnzb.102854$Eq1.17673@twister.rdc-kc.rr.com...
>>>>
>>>>>"Gary" <tytewad@comcast.net> wrote in message
>>>>>news:bac0c013.0312030600.81881f1@posting.goog le.com...
>>>>>
>>>>>>I always dread removing old water pump gaskets, etc. I like to do
>>>>>>a good job and it usually takes much longer than I expect. I
>
> usually
>
>>>>>>use a putty knife or razor knife. Does anyone have any tricks for
>>>>>>easy gasket removal? Thanks in advance.
>>>>>
>>>>>NAPA's gasket remover spray works great.There are others who sell
>>>>>this as well. Basically spray it on, give it a few minutes, and wipe
>
> off
>
>>>>>the gasket residue with a rag.
>>>>>
>>>>
>>>>Here's a tip. This stuff is probably the same as paint remover.
>>>>
>>>>Earle
>>>>
>>>>
>>>
>>>It could me, but it definitely has a different smell to it than paint
>>>stripper. The stuff even removes the fiber head gasket material that
>
> bakes
>
>>>on so bad. If I recall, a spray can of the stuff was less than $5, so it
>>>might be a good investment..
>>
>>I don't know how well the others work, but Permatex Gasket
>>Remover works great; it even dissolves RTV.
>>


That and a mini-wire wheel on a Dremel (battery powered or otherwise;
they now have a super-duty cordless one) oughtta do the trick.


>

Cal Wheeler

Joe wrote:

> It it disolves RTV what does it do to your skin or a latex glove (I'm
> serious, how do you apply it safely)?
>
> "Bob Casanova" <nospam@buzz.off> wrote in message
> news:4bnssv8tqqnvnijghudjkg0vlkbb5b1i1a@4ax.com...
>
>>On Wed, 03 Dec 2003 16:27:06 GMT, the following appeared in
>>rec.autos.makers.jeep+******, posted by "c" <c@me.org>:
>>
>>
>>>
>>>"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in
>
> message
>
>>>news:bql1ve$233nvl$1@ID-147790.news.uni-berlin.de...
>>>
>>>>"c" <c@me.org> wrote in message
>>>>news:Mxnzb.102854$Eq1.17673@twister.rdc-kc.rr.com...
>>>>
>>>>>"Gary" <tytewad@comcast.net> wrote in message
>>>>>news:bac0c013.0312030600.81881f1@posting.goog le.com...
>>>>>
>>>>>>I always dread removing old water pump gaskets, etc. I like to do
>>>>>>a good job and it usually takes much longer than I expect. I
>
> usually
>
>>>>>>use a putty knife or razor knife. Does anyone have any tricks for
>>>>>>easy gasket removal? Thanks in advance.
>>>>>
>>>>>NAPA's gasket remover spray works great.There are others who sell
>>>>>this as well. Basically spray it on, give it a few minutes, and wipe
>
> off
>
>>>>>the gasket residue with a rag.
>>>>>
>>>>
>>>>Here's a tip. This stuff is probably the same as paint remover.
>>>>
>>>>Earle
>>>>
>>>>
>>>
>>>It could me, but it definitely has a different smell to it than paint
>>>stripper. The stuff even removes the fiber head gasket material that
>
> bakes
>
>>>on so bad. If I recall, a spray can of the stuff was less than $5, so it
>>>might be a good investment..
>>
>>I don't know how well the others work, but Permatex Gasket
>>Remover works great; it even dissolves RTV.
>>


That and a mini-wire wheel on a Dremel (battery powered or otherwise;
they now have a super-duty cordless one) oughtta do the trick.


>