Fuel Gauge Prob
#21
Guest
Posts: n/a
Re: Fuel Gauge Prob
Thanks to everyone!
I'll update when I've time to try some of the ideas.
Spdloader
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:a0u7h.44349$39.11843@southeast.rr.com...
> 1987 Wrangler, 4.2L 5spd
>
> Fuel tank is new, sending unit is original, and worked prior to tank
> replacement.
>
> Problem is, with switch on, gauge on dash reads full until tank is almost
> completely empty, then gauge drops down to
> 1/4 mark.
>
> I'm scratching my head over this one, but I'm guessing I've got it
> grounded wrong somehow.
>
> Any ideas?
>
> I might add, there is no rust on this vehicle.
>
> Spdloader
>
I'll update when I've time to try some of the ideas.
Spdloader
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:a0u7h.44349$39.11843@southeast.rr.com...
> 1987 Wrangler, 4.2L 5spd
>
> Fuel tank is new, sending unit is original, and worked prior to tank
> replacement.
>
> Problem is, with switch on, gauge on dash reads full until tank is almost
> completely empty, then gauge drops down to
> 1/4 mark.
>
> I'm scratching my head over this one, but I'm guessing I've got it
> grounded wrong somehow.
>
> Any ideas?
>
> I might add, there is no rust on this vehicle.
>
> Spdloader
>
#22
Guest
Posts: n/a
Re: Fuel Gauge Prob
Thanks to everyone!
I'll update when I've time to try some of the ideas.
Spdloader
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:a0u7h.44349$39.11843@southeast.rr.com...
> 1987 Wrangler, 4.2L 5spd
>
> Fuel tank is new, sending unit is original, and worked prior to tank
> replacement.
>
> Problem is, with switch on, gauge on dash reads full until tank is almost
> completely empty, then gauge drops down to
> 1/4 mark.
>
> I'm scratching my head over this one, but I'm guessing I've got it
> grounded wrong somehow.
>
> Any ideas?
>
> I might add, there is no rust on this vehicle.
>
> Spdloader
>
I'll update when I've time to try some of the ideas.
Spdloader
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:a0u7h.44349$39.11843@southeast.rr.com...
> 1987 Wrangler, 4.2L 5spd
>
> Fuel tank is new, sending unit is original, and worked prior to tank
> replacement.
>
> Problem is, with switch on, gauge on dash reads full until tank is almost
> completely empty, then gauge drops down to
> 1/4 mark.
>
> I'm scratching my head over this one, but I'm guessing I've got it
> grounded wrong somehow.
>
> Any ideas?
>
> I might add, there is no rust on this vehicle.
>
> Spdloader
>
Thread
Thread Starter
Forum
Replies
Last Post
josh00@comcast.net
Jeep Mailing List
24
04-24-2005 04:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)