FTS 4" Lift on TJ
06-07-2004, 08:41 AM
#1
Guest
Posts: n/a
FTS 4" Lift on TJ
Hi,
Still trying to work out the exact route to 33" tires, is it
possible to install the Full Traction 4" lift kit with the supplied
transfer case drop hardware and run the existing slip yoke and
driveshaft as an interim before going to a SYE and CV driveshaft.
The original plan was OME 2" lift 1" Bodylift, but the
articulation will be far better with the FTS 4" configuration.
However the OME lift would have allowed me an interim period being
able to use the existing slip yoke/driveshaft.
Any help or comments will also be greatly appreciated.
Cheers
Nick
Still trying to work out the exact route to 33" tires, is it
possible to install the Full Traction 4" lift kit with the supplied
transfer case drop hardware and run the existing slip yoke and
driveshaft as an interim before going to a SYE and CV driveshaft.
The original plan was OME 2" lift 1" Bodylift, but the
articulation will be far better with the FTS 4" configuration.
However the OME lift would have allowed me an interim period being
able to use the existing slip yoke/driveshaft.
Any help or comments will also be greatly appreciated.
Cheers
Nick
06-07-2004, 10:49 AM
#2
Guest
Posts: n/a
Re: FTS 4" Lift on TJ
A 3" lift would clear 33's, and be much more friendly that the 4"
would without SYE etc.
Dave
http://mysite.verizon.net/res0p2es/david/index.htm
On Mon, 07 Jun 2004 13:41:10 +0100, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> Still trying to work out the exact route to 33" tires, is it
>possible to install the Full Traction 4" lift kit with the supplied
>transfer case drop hardware and run the existing slip yoke and
>driveshaft as an interim before going to a SYE and CV driveshaft.
>
> The original plan was OME 2" lift 1" Bodylift, but the
>articulation will be far better with the FTS 4" configuration.
>However the OME lift would have allowed me an interim period being
>able to use the existing slip yoke/driveshaft.
>
>Any help or comments will also be greatly appreciated.
>
>Cheers
>Nick
would without SYE etc.
Dave
http://mysite.verizon.net/res0p2es/david/index.htm
On Mon, 07 Jun 2004 13:41:10 +0100, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> Still trying to work out the exact route to 33" tires, is it
>possible to install the Full Traction 4" lift kit with the supplied
>transfer case drop hardware and run the existing slip yoke and
>driveshaft as an interim before going to a SYE and CV driveshaft.
>
> The original plan was OME 2" lift 1" Bodylift, but the
>articulation will be far better with the FTS 4" configuration.
>However the OME lift would have allowed me an interim period being
>able to use the existing slip yoke/driveshaft.
>
>Any help or comments will also be greatly appreciated.
>
>Cheers
>Nick
06-07-2004, 10:49 AM
#3
Guest
Posts: n/a
Re: FTS 4" Lift on TJ
A 3" lift would clear 33's, and be much more friendly that the 4"
would without SYE etc.
Dave
http://mysite.verizon.net/res0p2es/david/index.htm
On Mon, 07 Jun 2004 13:41:10 +0100, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> Still trying to work out the exact route to 33" tires, is it
>possible to install the Full Traction 4" lift kit with the supplied
>transfer case drop hardware and run the existing slip yoke and
>driveshaft as an interim before going to a SYE and CV driveshaft.
>
> The original plan was OME 2" lift 1" Bodylift, but the
>articulation will be far better with the FTS 4" configuration.
>However the OME lift would have allowed me an interim period being
>able to use the existing slip yoke/driveshaft.
>
>Any help or comments will also be greatly appreciated.
>
>Cheers
>Nick
would without SYE etc.
Dave
http://mysite.verizon.net/res0p2es/david/index.htm
On Mon, 07 Jun 2004 13:41:10 +0100, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> Still trying to work out the exact route to 33" tires, is it
>possible to install the Full Traction 4" lift kit with the supplied
>transfer case drop hardware and run the existing slip yoke and
>driveshaft as an interim before going to a SYE and CV driveshaft.
>
> The original plan was OME 2" lift 1" Bodylift, but the
>articulation will be far better with the FTS 4" configuration.
>However the OME lift would have allowed me an interim period being
>able to use the existing slip yoke/driveshaft.
>
>Any help or comments will also be greatly appreciated.
>
>Cheers
>Nick
06-07-2004, 10:49 AM
#4
Guest
Posts: n/a
Re: FTS 4" Lift on TJ
A 3" lift would clear 33's, and be much more friendly that the 4"
would without SYE etc.
Dave
http://mysite.verizon.net/res0p2es/david/index.htm
On Mon, 07 Jun 2004 13:41:10 +0100, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> Still trying to work out the exact route to 33" tires, is it
>possible to install the Full Traction 4" lift kit with the supplied
>transfer case drop hardware and run the existing slip yoke and
>driveshaft as an interim before going to a SYE and CV driveshaft.
>
> The original plan was OME 2" lift 1" Bodylift, but the
>articulation will be far better with the FTS 4" configuration.
>However the OME lift would have allowed me an interim period being
>able to use the existing slip yoke/driveshaft.
>
>Any help or comments will also be greatly appreciated.
>
>Cheers
>Nick
would without SYE etc.
Dave
http://mysite.verizon.net/res0p2es/david/index.htm
On Mon, 07 Jun 2004 13:41:10 +0100, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> Still trying to work out the exact route to 33" tires, is it
>possible to install the Full Traction 4" lift kit with the supplied
>transfer case drop hardware and run the existing slip yoke and
>driveshaft as an interim before going to a SYE and CV driveshaft.
>
> The original plan was OME 2" lift 1" Bodylift, but the
>articulation will be far better with the FTS 4" configuration.
>However the OME lift would have allowed me an interim period being
>able to use the existing slip yoke/driveshaft.
>
>Any help or comments will also be greatly appreciated.
>
>Cheers
>Nick
06-07-2004, 10:49 AM
#5
Guest
Posts: n/a
Re: FTS 4" Lift on TJ
A 3" lift would clear 33's, and be much more friendly that the 4"
would without SYE etc.
Dave
http://mysite.verizon.net/res0p2es/david/index.htm
On Mon, 07 Jun 2004 13:41:10 +0100, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> Still trying to work out the exact route to 33" tires, is it
>possible to install the Full Traction 4" lift kit with the supplied
>transfer case drop hardware and run the existing slip yoke and
>driveshaft as an interim before going to a SYE and CV driveshaft.
>
> The original plan was OME 2" lift 1" Bodylift, but the
>articulation will be far better with the FTS 4" configuration.
>However the OME lift would have allowed me an interim period being
>able to use the existing slip yoke/driveshaft.
>
>Any help or comments will also be greatly appreciated.
>
>Cheers
>Nick
would without SYE etc.
Dave
http://mysite.verizon.net/res0p2es/david/index.htm
On Mon, 07 Jun 2004 13:41:10 +0100, Nick
<nick@nospam_nrdavis.demon.co.uk> wrote:
>Hi,
> Still trying to work out the exact route to 33" tires, is it
>possible to install the Full Traction 4" lift kit with the supplied
>transfer case drop hardware and run the existing slip yoke and
>driveshaft as an interim before going to a SYE and CV driveshaft.
>
> The original plan was OME 2" lift 1" Bodylift, but the
>articulation will be far better with the FTS 4" configuration.
>However the OME lift would have allowed me an interim period being
>able to use the existing slip yoke/driveshaft.
>
>Any help or comments will also be greatly appreciated.
>
>Cheers
>Nick
06-07-2004, 11:15 AM
#6
Guest
Posts: n/a
Re: FTS 4" Lift on TJ
"Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
news:pao8c0hfrdeosj11pjgqbupqakd910qbcg@4ax.com...
> Hi,
> Still trying to work out the exact route to 33" tires, is it
> possible to install the Full Traction 4" lift kit with the supplied
> transfer case drop hardware and run the existing slip yoke and
> driveshaft as an interim before going to a SYE and CV driveshaft.
Yes, but you won't like it.
> The original plan was OME 2" lift 1" Bodylift, but the
> articulation will be far better with the FTS 4" configuration.
> However the OME lift would have allowed me an interim period being
> able to use the existing slip yoke/driveshaft.
I'm not sure what knid of rig you're talking about here, however, where
lifts are concerned, time and time again I've seen folks go for a shorter
lift for expediency, etc., then regret it. (This is also the voice of
experience!)
Save your money for the SYE /driveshaft kit and do it all at the same time.
You'll likely also have to regear...to do it right is not cheap!
06-07-2004, 11:15 AM
#7
Guest
Posts: n/a
Re: FTS 4" Lift on TJ
"Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
news:pao8c0hfrdeosj11pjgqbupqakd910qbcg@4ax.com...
> Hi,
> Still trying to work out the exact route to 33" tires, is it
> possible to install the Full Traction 4" lift kit with the supplied
> transfer case drop hardware and run the existing slip yoke and
> driveshaft as an interim before going to a SYE and CV driveshaft.
Yes, but you won't like it.
> The original plan was OME 2" lift 1" Bodylift, but the
> articulation will be far better with the FTS 4" configuration.
> However the OME lift would have allowed me an interim period being
> able to use the existing slip yoke/driveshaft.
I'm not sure what knid of rig you're talking about here, however, where
lifts are concerned, time and time again I've seen folks go for a shorter
lift for expediency, etc., then regret it. (This is also the voice of
experience!)
Save your money for the SYE /driveshaft kit and do it all at the same time.
You'll likely also have to regear...to do it right is not cheap!
06-07-2004, 11:15 AM
#8
Guest
Posts: n/a
Re: FTS 4" Lift on TJ
"Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
news:pao8c0hfrdeosj11pjgqbupqakd910qbcg@4ax.com...
> Hi,
> Still trying to work out the exact route to 33" tires, is it
> possible to install the Full Traction 4" lift kit with the supplied
> transfer case drop hardware and run the existing slip yoke and
> driveshaft as an interim before going to a SYE and CV driveshaft.
Yes, but you won't like it.
> The original plan was OME 2" lift 1" Bodylift, but the
> articulation will be far better with the FTS 4" configuration.
> However the OME lift would have allowed me an interim period being
> able to use the existing slip yoke/driveshaft.
I'm not sure what knid of rig you're talking about here, however, where
lifts are concerned, time and time again I've seen folks go for a shorter
lift for expediency, etc., then regret it. (This is also the voice of
experience!)
Save your money for the SYE /driveshaft kit and do it all at the same time.
You'll likely also have to regear...to do it right is not cheap!
06-07-2004, 11:15 AM
#9
Guest
Posts: n/a
Re: FTS 4" Lift on TJ
"Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
news:pao8c0hfrdeosj11pjgqbupqakd910qbcg@4ax.com...
> Hi,
> Still trying to work out the exact route to 33" tires, is it
> possible to install the Full Traction 4" lift kit with the supplied
> transfer case drop hardware and run the existing slip yoke and
> driveshaft as an interim before going to a SYE and CV driveshaft.
Yes, but you won't like it.
> The original plan was OME 2" lift 1" Bodylift, but the
> articulation will be far better with the FTS 4" configuration.
> However the OME lift would have allowed me an interim period being
> able to use the existing slip yoke/driveshaft.
I'm not sure what knid of rig you're talking about here, however, where
lifts are concerned, time and time again I've seen folks go for a shorter
lift for expediency, etc., then regret it. (This is also the voice of
experience!)
Save your money for the SYE /driveshaft kit and do it all at the same time.
You'll likely also have to regear...to do it right is not cheap!
06-07-2004, 11:45 AM
#10
Guest
Posts: n/a
Re: FTS 4" Lift on TJ
I'm going to be putting a 4" lift on this weekend. With the drop tubes, I
shouldn't need an SYE kit should I? I'd like to go that route eventually,
but don't have the cash.
Eric
99 TJ SE
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:ca20qj01c0f@enews3.newsguy.com...
>
> "Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
> news:pao8c0hfrdeosj11pjgqbupqakd910qbcg@4ax.com...
> > Hi,
> > Still trying to work out the exact route to 33" tires, is it
> > possible to install the Full Traction 4" lift kit with the supplied
> > transfer case drop hardware and run the existing slip yoke and
> > driveshaft as an interim before going to a SYE and CV driveshaft.
>
> Yes, but you won't like it.
>
> > The original plan was OME 2" lift 1" Bodylift, but the
> > articulation will be far better with the FTS 4" configuration.
> > However the OME lift would have allowed me an interim period being
> > able to use the existing slip yoke/driveshaft.
>
>
> I'm not sure what knid of rig you're talking about here, however, where
> lifts are concerned, time and time again I've seen folks go for a shorter
> lift for expediency, etc., then regret it. (This is also the voice of
> experience!)
>
> Save your money for the SYE /driveshaft kit and do it all at the same
time.
> You'll likely also have to regear...to do it right is not cheap!
>
>
shouldn't need an SYE kit should I? I'd like to go that route eventually,
but don't have the cash.
Eric
99 TJ SE
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:ca20qj01c0f@enews3.newsguy.com...
>
> "Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
> news:pao8c0hfrdeosj11pjgqbupqakd910qbcg@4ax.com...
> > Hi,
> > Still trying to work out the exact route to 33" tires, is it
> > possible to install the Full Traction 4" lift kit with the supplied
> > transfer case drop hardware and run the existing slip yoke and
> > driveshaft as an interim before going to a SYE and CV driveshaft.
>
> Yes, but you won't like it.
>
> > The original plan was OME 2" lift 1" Bodylift, but the
> > articulation will be far better with the FTS 4" configuration.
> > However the OME lift would have allowed me an interim period being
> > able to use the existing slip yoke/driveshaft.
>
>
> I'm not sure what knid of rig you're talking about here, however, where
> lifts are concerned, time and time again I've seen folks go for a shorter
> lift for expediency, etc., then regret it. (This is also the voice of
> experience!)
>
> Save your money for the SYE /driveshaft kit and do it all at the same
time.
> You'll likely also have to regear...to do it right is not cheap!
>
>
