Front end Noises!!!
04-14-2005, 11:04 PM
#11
Guest
Posts: n/a
Re: Front end Noises!!!
Closely inspect the tire wear on your front tires. If the left/right tire
wear is uneven, this could be the culprit.
I have the same make, model, and year Jeep, with Quadradrive and v8. It
groaned terribly on sharp, slow turns. Mechanic said I had a bad tie rod,
causing uneven wear. He recommended replacing the tie rod, and getting
new tires. I feel that the tires have about 10K miles more of service.
The front tires were worn more (and uneven wear) than the rear, so I
rotated them. The problem disappeared.
--James--
wear is uneven, this could be the culprit.
I have the same make, model, and year Jeep, with Quadradrive and v8. It
groaned terribly on sharp, slow turns. Mechanic said I had a bad tie rod,
causing uneven wear. He recommended replacing the tie rod, and getting
new tires. I feel that the tires have about 10K miles more of service.
The front tires were worn more (and uneven wear) than the rear, so I
rotated them. The problem disappeared.
--James--
04-14-2005, 11:04 PM
#12
Guest
Posts: n/a
Re: Front end Noises!!!
Closely inspect the tire wear on your front tires. If the left/right tire
wear is uneven, this could be the culprit.
I have the same make, model, and year Jeep, with Quadradrive and v8. It
groaned terribly on sharp, slow turns. Mechanic said I had a bad tie rod,
causing uneven wear. He recommended replacing the tie rod, and getting
new tires. I feel that the tires have about 10K miles more of service.
The front tires were worn more (and uneven wear) than the rear, so I
rotated them. The problem disappeared.
--James--
wear is uneven, this could be the culprit.
I have the same make, model, and year Jeep, with Quadradrive and v8. It
groaned terribly on sharp, slow turns. Mechanic said I had a bad tie rod,
causing uneven wear. He recommended replacing the tie rod, and getting
new tires. I feel that the tires have about 10K miles more of service.
The front tires were worn more (and uneven wear) than the rear, so I
rotated them. The problem disappeared.
--James--
04-14-2005, 11:04 PM
#13
Guest
Posts: n/a
Re: Front end Noises!!!
Closely inspect the tire wear on your front tires. If the left/right tire
wear is uneven, this could be the culprit.
I have the same make, model, and year Jeep, with Quadradrive and v8. It
groaned terribly on sharp, slow turns. Mechanic said I had a bad tie rod,
causing uneven wear. He recommended replacing the tie rod, and getting
new tires. I feel that the tires have about 10K miles more of service.
The front tires were worn more (and uneven wear) than the rear, so I
rotated them. The problem disappeared.
--James--
wear is uneven, this could be the culprit.
I have the same make, model, and year Jeep, with Quadradrive and v8. It
groaned terribly on sharp, slow turns. Mechanic said I had a bad tie rod,
causing uneven wear. He recommended replacing the tie rod, and getting
new tires. I feel that the tires have about 10K miles more of service.
The front tires were worn more (and uneven wear) than the rear, so I
rotated them. The problem disappeared.
--James--
04-15-2005, 02:31 PM
#14
Guest
Posts: n/a
Re: Front end Noises!!!
If I am not mistaken, the QuadraDrive is the Full Time 4WD system. It uses a
viscous coupler to handle the different speeds of the front and rear axles.
By your description, I would guess that the VC is on its way out.
The left and right tires turn different speeds in a corner because the arc
that they follow is a different distance and the tires have to end up at the
same place at the end of the turn. Since the distance is different but the
time is the same, then the speed has to be different as well. The
differential inside the axles allows this to happen in complete silence.
The front and rear axles also travel different distances in the same amount
of time, and therefore need a differential to accomodate the different
speeds of the front and rear drive shafts. There is a viscous coupling that
handles this job, and I am pretty sure that it can send noises down the
front drive shaft so that they sound like they are coming from the front
axle. Of course, there is the possibility that the noise IS coming from the
front axle, but I think your VC should be looked at first.
"ganggreen82" <reload82@optonline.net> wrote in message
news:1113529570.999665.306330@o13g2000cwo.googlegr oups.com...
> I recently purchased a used 2000 Jeep Grand Cherokee V8 Limited with
> QuadraDrive. The problem is whenever I make turns, such as a drive
> thru, I get this horrible grinding moaning noise coming from the front
> end. I don't know what to do or what it is. Anyone have this problem.
>
> - Thanks for the input.
>
viscous coupler to handle the different speeds of the front and rear axles.
By your description, I would guess that the VC is on its way out.
The left and right tires turn different speeds in a corner because the arc
that they follow is a different distance and the tires have to end up at the
same place at the end of the turn. Since the distance is different but the
time is the same, then the speed has to be different as well. The
differential inside the axles allows this to happen in complete silence.
The front and rear axles also travel different distances in the same amount
of time, and therefore need a differential to accomodate the different
speeds of the front and rear drive shafts. There is a viscous coupling that
handles this job, and I am pretty sure that it can send noises down the
front drive shaft so that they sound like they are coming from the front
axle. Of course, there is the possibility that the noise IS coming from the
front axle, but I think your VC should be looked at first.
"ganggreen82" <reload82@optonline.net> wrote in message
news:1113529570.999665.306330@o13g2000cwo.googlegr oups.com...
> I recently purchased a used 2000 Jeep Grand Cherokee V8 Limited with
> QuadraDrive. The problem is whenever I make turns, such as a drive
> thru, I get this horrible grinding moaning noise coming from the front
> end. I don't know what to do or what it is. Anyone have this problem.
>
> - Thanks for the input.
>
04-15-2005, 02:31 PM
#15
Guest
Posts: n/a
Re: Front end Noises!!!
If I am not mistaken, the QuadraDrive is the Full Time 4WD system. It uses a
viscous coupler to handle the different speeds of the front and rear axles.
By your description, I would guess that the VC is on its way out.
The left and right tires turn different speeds in a corner because the arc
that they follow is a different distance and the tires have to end up at the
same place at the end of the turn. Since the distance is different but the
time is the same, then the speed has to be different as well. The
differential inside the axles allows this to happen in complete silence.
The front and rear axles also travel different distances in the same amount
of time, and therefore need a differential to accomodate the different
speeds of the front and rear drive shafts. There is a viscous coupling that
handles this job, and I am pretty sure that it can send noises down the
front drive shaft so that they sound like they are coming from the front
axle. Of course, there is the possibility that the noise IS coming from the
front axle, but I think your VC should be looked at first.
"ganggreen82" <reload82@optonline.net> wrote in message
news:1113529570.999665.306330@o13g2000cwo.googlegr oups.com...
> I recently purchased a used 2000 Jeep Grand Cherokee V8 Limited with
> QuadraDrive. The problem is whenever I make turns, such as a drive
> thru, I get this horrible grinding moaning noise coming from the front
> end. I don't know what to do or what it is. Anyone have this problem.
>
> - Thanks for the input.
>
viscous coupler to handle the different speeds of the front and rear axles.
By your description, I would guess that the VC is on its way out.
The left and right tires turn different speeds in a corner because the arc
that they follow is a different distance and the tires have to end up at the
same place at the end of the turn. Since the distance is different but the
time is the same, then the speed has to be different as well. The
differential inside the axles allows this to happen in complete silence.
The front and rear axles also travel different distances in the same amount
of time, and therefore need a differential to accomodate the different
speeds of the front and rear drive shafts. There is a viscous coupling that
handles this job, and I am pretty sure that it can send noises down the
front drive shaft so that they sound like they are coming from the front
axle. Of course, there is the possibility that the noise IS coming from the
front axle, but I think your VC should be looked at first.
"ganggreen82" <reload82@optonline.net> wrote in message
news:1113529570.999665.306330@o13g2000cwo.googlegr oups.com...
> I recently purchased a used 2000 Jeep Grand Cherokee V8 Limited with
> QuadraDrive. The problem is whenever I make turns, such as a drive
> thru, I get this horrible grinding moaning noise coming from the front
> end. I don't know what to do or what it is. Anyone have this problem.
>
> - Thanks for the input.
>
04-15-2005, 02:31 PM
#16
Guest
Posts: n/a
Re: Front end Noises!!!
If I am not mistaken, the QuadraDrive is the Full Time 4WD system. It uses a
viscous coupler to handle the different speeds of the front and rear axles.
By your description, I would guess that the VC is on its way out.
The left and right tires turn different speeds in a corner because the arc
that they follow is a different distance and the tires have to end up at the
same place at the end of the turn. Since the distance is different but the
time is the same, then the speed has to be different as well. The
differential inside the axles allows this to happen in complete silence.
The front and rear axles also travel different distances in the same amount
of time, and therefore need a differential to accomodate the different
speeds of the front and rear drive shafts. There is a viscous coupling that
handles this job, and I am pretty sure that it can send noises down the
front drive shaft so that they sound like they are coming from the front
axle. Of course, there is the possibility that the noise IS coming from the
front axle, but I think your VC should be looked at first.
"ganggreen82" <reload82@optonline.net> wrote in message
news:1113529570.999665.306330@o13g2000cwo.googlegr oups.com...
> I recently purchased a used 2000 Jeep Grand Cherokee V8 Limited with
> QuadraDrive. The problem is whenever I make turns, such as a drive
> thru, I get this horrible grinding moaning noise coming from the front
> end. I don't know what to do or what it is. Anyone have this problem.
>
> - Thanks for the input.
>
viscous coupler to handle the different speeds of the front and rear axles.
By your description, I would guess that the VC is on its way out.
The left and right tires turn different speeds in a corner because the arc
that they follow is a different distance and the tires have to end up at the
same place at the end of the turn. Since the distance is different but the
time is the same, then the speed has to be different as well. The
differential inside the axles allows this to happen in complete silence.
The front and rear axles also travel different distances in the same amount
of time, and therefore need a differential to accomodate the different
speeds of the front and rear drive shafts. There is a viscous coupling that
handles this job, and I am pretty sure that it can send noises down the
front drive shaft so that they sound like they are coming from the front
axle. Of course, there is the possibility that the noise IS coming from the
front axle, but I think your VC should be looked at first.
"ganggreen82" <reload82@optonline.net> wrote in message
news:1113529570.999665.306330@o13g2000cwo.googlegr oups.com...
> I recently purchased a used 2000 Jeep Grand Cherokee V8 Limited with
> QuadraDrive. The problem is whenever I make turns, such as a drive
> thru, I get this horrible grinding moaning noise coming from the front
> end. I don't know what to do or what it is. Anyone have this problem.
>
> - Thanks for the input.
>
04-15-2005, 02:31 PM
#17
Guest
Posts: n/a
Re: Front end Noises!!!
If I am not mistaken, the QuadraDrive is the Full Time 4WD system. It uses a
viscous coupler to handle the different speeds of the front and rear axles.
By your description, I would guess that the VC is on its way out.
The left and right tires turn different speeds in a corner because the arc
that they follow is a different distance and the tires have to end up at the
same place at the end of the turn. Since the distance is different but the
time is the same, then the speed has to be different as well. The
differential inside the axles allows this to happen in complete silence.
The front and rear axles also travel different distances in the same amount
of time, and therefore need a differential to accomodate the different
speeds of the front and rear drive shafts. There is a viscous coupling that
handles this job, and I am pretty sure that it can send noises down the
front drive shaft so that they sound like they are coming from the front
axle. Of course, there is the possibility that the noise IS coming from the
front axle, but I think your VC should be looked at first.
"ganggreen82" <reload82@optonline.net> wrote in message
news:1113529570.999665.306330@o13g2000cwo.googlegr oups.com...
> I recently purchased a used 2000 Jeep Grand Cherokee V8 Limited with
> QuadraDrive. The problem is whenever I make turns, such as a drive
> thru, I get this horrible grinding moaning noise coming from the front
> end. I don't know what to do or what it is. Anyone have this problem.
>
> - Thanks for the input.
>
viscous coupler to handle the different speeds of the front and rear axles.
By your description, I would guess that the VC is on its way out.
The left and right tires turn different speeds in a corner because the arc
that they follow is a different distance and the tires have to end up at the
same place at the end of the turn. Since the distance is different but the
time is the same, then the speed has to be different as well. The
differential inside the axles allows this to happen in complete silence.
The front and rear axles also travel different distances in the same amount
of time, and therefore need a differential to accomodate the different
speeds of the front and rear drive shafts. There is a viscous coupling that
handles this job, and I am pretty sure that it can send noises down the
front drive shaft so that they sound like they are coming from the front
axle. Of course, there is the possibility that the noise IS coming from the
front axle, but I think your VC should be looked at first.
"ganggreen82" <reload82@optonline.net> wrote in message
news:1113529570.999665.306330@o13g2000cwo.googlegr oups.com...
> I recently purchased a used 2000 Jeep Grand Cherokee V8 Limited with
> QuadraDrive. The problem is whenever I make turns, such as a drive
> thru, I get this horrible grinding moaning noise coming from the front
> end. I don't know what to do or what it is. Anyone have this problem.
>
> - Thanks for the input.
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
