Frame swap restore for my 86 CJ7
Guest
Posts: n/a
Re: Frame swap restore for my 86 CJ7
Thanks for the suggestion, but I kinda like making my own lines. I will
check out bulk line though. I just inspected the ones I built in 00 and
they are showing light surface rust. I think I will coat the new ones
in galvanizing spray or try the stainless if I can get it.
It's also time for a new master cylinder, mine creeps a bit when the
pedal is held down. Ohh, the 'little' details are $tarting to add up...
I am going to leave the ones across the back axle alone.
All my 'glass body mounting bolts are stainless and have held up well.
Mike
c wrote:
> Mike,
>
> You may want to consider going with stainless tubes for the brakes and
> fuel lines. I did that with my truck when I redid it and the stainless
> only cost me $40 more than regular steel tubing.
>
> I used a company called inline tube, but I didn't see any Jeep stuff
> there. Their website is http://www.inlinetube.com. I can say that the
> fuel and brake lines I got from them fit perfectly and are very good
> quality. It would be worth a phone call to them to see if they offer
> stuff for Jeeps. Otherwise, I have had friends use
> http://www.classictube.com who does list Jeep stuff and they were also
> very satisfied with their products.
>
> Chris
check out bulk line though. I just inspected the ones I built in 00 and
they are showing light surface rust. I think I will coat the new ones
in galvanizing spray or try the stainless if I can get it.
It's also time for a new master cylinder, mine creeps a bit when the
pedal is held down. Ohh, the 'little' details are $tarting to add up...
I am going to leave the ones across the back axle alone.
All my 'glass body mounting bolts are stainless and have held up well.
Mike
c wrote:
> Mike,
>
> You may want to consider going with stainless tubes for the brakes and
> fuel lines. I did that with my truck when I redid it and the stainless
> only cost me $40 more than regular steel tubing.
>
> I used a company called inline tube, but I didn't see any Jeep stuff
> there. Their website is http://www.inlinetube.com. I can say that the
> fuel and brake lines I got from them fit perfectly and are very good
> quality. It would be worth a phone call to them to see if they offer
> stuff for Jeeps. Otherwise, I have had friends use
> http://www.classictube.com who does list Jeep stuff and they were also
> very satisfied with their products.
>
> Chris
Guest
Posts: n/a
Re: Frame swap restore for my 86 CJ7
Thanks for the suggestion, but I kinda like making my own lines. I will
check out bulk line though. I just inspected the ones I built in 00 and
they are showing light surface rust. I think I will coat the new ones
in galvanizing spray or try the stainless if I can get it.
It's also time for a new master cylinder, mine creeps a bit when the
pedal is held down. Ohh, the 'little' details are $tarting to add up...
I am going to leave the ones across the back axle alone.
All my 'glass body mounting bolts are stainless and have held up well.
Mike
c wrote:
> Mike,
>
> You may want to consider going with stainless tubes for the brakes and
> fuel lines. I did that with my truck when I redid it and the stainless
> only cost me $40 more than regular steel tubing.
>
> I used a company called inline tube, but I didn't see any Jeep stuff
> there. Their website is http://www.inlinetube.com. I can say that the
> fuel and brake lines I got from them fit perfectly and are very good
> quality. It would be worth a phone call to them to see if they offer
> stuff for Jeeps. Otherwise, I have had friends use
> http://www.classictube.com who does list Jeep stuff and they were also
> very satisfied with their products.
>
> Chris
check out bulk line though. I just inspected the ones I built in 00 and
they are showing light surface rust. I think I will coat the new ones
in galvanizing spray or try the stainless if I can get it.
It's also time for a new master cylinder, mine creeps a bit when the
pedal is held down. Ohh, the 'little' details are $tarting to add up...
I am going to leave the ones across the back axle alone.
All my 'glass body mounting bolts are stainless and have held up well.
Mike
c wrote:
> Mike,
>
> You may want to consider going with stainless tubes for the brakes and
> fuel lines. I did that with my truck when I redid it and the stainless
> only cost me $40 more than regular steel tubing.
>
> I used a company called inline tube, but I didn't see any Jeep stuff
> there. Their website is http://www.inlinetube.com. I can say that the
> fuel and brake lines I got from them fit perfectly and are very good
> quality. It would be worth a phone call to them to see if they offer
> stuff for Jeeps. Otherwise, I have had friends use
> http://www.classictube.com who does list Jeep stuff and they were also
> very satisfied with their products.
>
> Chris
Guest
Posts: n/a
Re: Frame swap restore for my 86 CJ7
Thanks for the suggestion, but I kinda like making my own lines. I will
check out bulk line though. I just inspected the ones I built in 00 and
they are showing light surface rust. I think I will coat the new ones
in galvanizing spray or try the stainless if I can get it.
It's also time for a new master cylinder, mine creeps a bit when the
pedal is held down. Ohh, the 'little' details are $tarting to add up...
I am going to leave the ones across the back axle alone.
All my 'glass body mounting bolts are stainless and have held up well.
Mike
c wrote:
> Mike,
>
> You may want to consider going with stainless tubes for the brakes and
> fuel lines. I did that with my truck when I redid it and the stainless
> only cost me $40 more than regular steel tubing.
>
> I used a company called inline tube, but I didn't see any Jeep stuff
> there. Their website is http://www.inlinetube.com. I can say that the
> fuel and brake lines I got from them fit perfectly and are very good
> quality. It would be worth a phone call to them to see if they offer
> stuff for Jeeps. Otherwise, I have had friends use
> http://www.classictube.com who does list Jeep stuff and they were also
> very satisfied with their products.
>
> Chris
check out bulk line though. I just inspected the ones I built in 00 and
they are showing light surface rust. I think I will coat the new ones
in galvanizing spray or try the stainless if I can get it.
It's also time for a new master cylinder, mine creeps a bit when the
pedal is held down. Ohh, the 'little' details are $tarting to add up...
I am going to leave the ones across the back axle alone.
All my 'glass body mounting bolts are stainless and have held up well.
Mike
c wrote:
> Mike,
>
> You may want to consider going with stainless tubes for the brakes and
> fuel lines. I did that with my truck when I redid it and the stainless
> only cost me $40 more than regular steel tubing.
>
> I used a company called inline tube, but I didn't see any Jeep stuff
> there. Their website is http://www.inlinetube.com. I can say that the
> fuel and brake lines I got from them fit perfectly and are very good
> quality. It would be worth a phone call to them to see if they offer
> stuff for Jeeps. Otherwise, I have had friends use
> http://www.classictube.com who does list Jeep stuff and they were also
> very satisfied with their products.
>
> Chris
Guest
Posts: n/a
Re: Frame swap restore for my 86 CJ7
I am doing this already.
My album site, Sony is closing down so I need to set up a new account
someplace.
Meanwhile here is a start:
http://www.imagestation.com/album/pi...?id=2086967970
Mike
griffin wrote:
> You should take pics along the way so we can see the progress of the
> MikeMobile.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:471182ac$0$6058$9a6e19ea@unlimited.newshostin g.com...
>> This is going to be fun...
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>
>
My album site, Sony is closing down so I need to set up a new account
someplace.
Meanwhile here is a start:
http://www.imagestation.com/album/pi...?id=2086967970
Mike
griffin wrote:
> You should take pics along the way so we can see the progress of the
> MikeMobile.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:471182ac$0$6058$9a6e19ea@unlimited.newshostin g.com...
>> This is going to be fun...
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>
>
Guest
Posts: n/a
Re: Frame swap restore for my 86 CJ7
I am doing this already.
My album site, Sony is closing down so I need to set up a new account
someplace.
Meanwhile here is a start:
http://www.imagestation.com/album/pi...?id=2086967970
Mike
griffin wrote:
> You should take pics along the way so we can see the progress of the
> MikeMobile.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:471182ac$0$6058$9a6e19ea@unlimited.newshostin g.com...
>> This is going to be fun...
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>
>
My album site, Sony is closing down so I need to set up a new account
someplace.
Meanwhile here is a start:
http://www.imagestation.com/album/pi...?id=2086967970
Mike
griffin wrote:
> You should take pics along the way so we can see the progress of the
> MikeMobile.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:471182ac$0$6058$9a6e19ea@unlimited.newshostin g.com...
>> This is going to be fun...
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>
>
Guest
Posts: n/a
Re: Frame swap restore for my 86 CJ7
I am doing this already.
My album site, Sony is closing down so I need to set up a new account
someplace.
Meanwhile here is a start:
http://www.imagestation.com/album/pi...?id=2086967970
Mike
griffin wrote:
> You should take pics along the way so we can see the progress of the
> MikeMobile.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:471182ac$0$6058$9a6e19ea@unlimited.newshostin g.com...
>> This is going to be fun...
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>
>
My album site, Sony is closing down so I need to set up a new account
someplace.
Meanwhile here is a start:
http://www.imagestation.com/album/pi...?id=2086967970
Mike
griffin wrote:
> You should take pics along the way so we can see the progress of the
> MikeMobile.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:471182ac$0$6058$9a6e19ea@unlimited.newshostin g.com...
>> This is going to be fun...
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>
>
Guest
Posts: n/a
Re: Frame swap restore for my 86 CJ7
I am doing this already.
My album site, Sony is closing down so I need to set up a new account
someplace.
Meanwhile here is a start:
http://www.imagestation.com/album/pi...?id=2086967970
Mike
griffin wrote:
> You should take pics along the way so we can see the progress of the
> MikeMobile.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:471182ac$0$6058$9a6e19ea@unlimited.newshostin g.com...
>> This is going to be fun...
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>
>
My album site, Sony is closing down so I need to set up a new account
someplace.
Meanwhile here is a start:
http://www.imagestation.com/album/pi...?id=2086967970
Mike
griffin wrote:
> You should take pics along the way so we can see the progress of the
> MikeMobile.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:471182ac$0$6058$9a6e19ea@unlimited.newshostin g.com...
>> This is going to be fun...
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>
>
Guest
Posts: n/a
Re: Frame swap restore for my 86 CJ7
Hi Mike,
You know there's and incredibly smart idea, used on your frame, an open
frame end that you may take a garden hose and push up to the front bumper
blowing the mud out that use to hold the water for rust. I don't know anyone
that has, but I bet you might save some time in the future having it
magnafluxed.
God Bless America, Bill O|||||||O
mailto:-------------------- http://----------.com/mikeRomain/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:47125ddd$0$5134$9a6e19ea@unlimited.newshostin g.com...
> I am doing this already.
>
> My album site, Sony is closing down so I need to set up a new account
> someplace.
>
> Meanwhile here is a start:
> http://www.imagestation.com/album/pi...?id=2086967970
>
> Mike
--
Posted via a free Usenet account from http://www.teranews.com
You know there's and incredibly smart idea, used on your frame, an open
frame end that you may take a garden hose and push up to the front bumper
blowing the mud out that use to hold the water for rust. I don't know anyone
that has, but I bet you might save some time in the future having it
magnafluxed.
God Bless America, Bill O|||||||O
mailto:-------------------- http://----------.com/mikeRomain/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:47125ddd$0$5134$9a6e19ea@unlimited.newshostin g.com...
> I am doing this already.
>
> My album site, Sony is closing down so I need to set up a new account
> someplace.
>
> Meanwhile here is a start:
> http://www.imagestation.com/album/pi...?id=2086967970
>
> Mike
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: Frame swap restore for my 86 CJ7
Hi Mike,
You know there's and incredibly smart idea, used on your frame, an open
frame end that you may take a garden hose and push up to the front bumper
blowing the mud out that use to hold the water for rust. I don't know anyone
that has, but I bet you might save some time in the future having it
magnafluxed.
God Bless America, Bill O|||||||O
mailto:-------------------- http://----------.com/mikeRomain/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:47125ddd$0$5134$9a6e19ea@unlimited.newshostin g.com...
> I am doing this already.
>
> My album site, Sony is closing down so I need to set up a new account
> someplace.
>
> Meanwhile here is a start:
> http://www.imagestation.com/album/pi...?id=2086967970
>
> Mike
--
Posted via a free Usenet account from http://www.teranews.com
You know there's and incredibly smart idea, used on your frame, an open
frame end that you may take a garden hose and push up to the front bumper
blowing the mud out that use to hold the water for rust. I don't know anyone
that has, but I bet you might save some time in the future having it
magnafluxed.
God Bless America, Bill O|||||||O
mailto:-------------------- http://----------.com/mikeRomain/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:47125ddd$0$5134$9a6e19ea@unlimited.newshostin g.com...
> I am doing this already.
>
> My album site, Sony is closing down so I need to set up a new account
> someplace.
>
> Meanwhile here is a start:
> http://www.imagestation.com/album/pi...?id=2086967970
>
> Mike
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: Frame swap restore for my 86 CJ7
Hi Mike,
You know there's and incredibly smart idea, used on your frame, an open
frame end that you may take a garden hose and push up to the front bumper
blowing the mud out that use to hold the water for rust. I don't know anyone
that has, but I bet you might save some time in the future having it
magnafluxed.
God Bless America, Bill O|||||||O
mailto:-------------------- http://----------.com/mikeRomain/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:47125ddd$0$5134$9a6e19ea@unlimited.newshostin g.com...
> I am doing this already.
>
> My album site, Sony is closing down so I need to set up a new account
> someplace.
>
> Meanwhile here is a start:
> http://www.imagestation.com/album/pi...?id=2086967970
>
> Mike
--
Posted via a free Usenet account from http://www.teranews.com
You know there's and incredibly smart idea, used on your frame, an open
frame end that you may take a garden hose and push up to the front bumper
blowing the mud out that use to hold the water for rust. I don't know anyone
that has, but I bet you might save some time in the future having it
magnafluxed.
God Bless America, Bill O|||||||O
mailto:-------------------- http://----------.com/mikeRomain/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:47125ddd$0$5134$9a6e19ea@unlimited.newshostin g.com...
> I am doing this already.
>
> My album site, Sony is closing down so I need to set up a new account
> someplace.
>
> Meanwhile here is a start:
> http://www.imagestation.com/album/pi...?id=2086967970
>
> Mike
--
Posted via a free Usenet account from http://www.teranews.com